Close

Search

Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
share
Email Facebook Twitter Google+ LinkedIn Comments

  • Dialing up the laser power

Photonics Spectra
Apr 2010
Marie Freebody, marie.freebody@photonics.com

AUSTIN, Texas – Over the past 20 years, physicists have been steadily stepping up the power of lasers from the previously impressive terawatt level to the recently realized petawatt level. Now, researchers at the University of Texas are working toward building the first exawatt laser, which will be the most powerful laser in the world.

“Every leap in power made by the laser community has led to dramatic and unexpected applications,” said professor Todd Ditmire, who heads up the Texas Petawatt project. “The leap in power by a factor of 1000 that an exawatt laser would provide will no doubt lead to new applications.”

Current research uses for the Texas Petawatt Laser include producing thermonuclear fusion, a process that many engineers would like to harness for the commercial generation of electricity. Other applications include the study of hot, dense plasmas.


This shows the amplifier bay of the Texas Petawatt Laser. Images courtesy of the Texas Petawatt project.


Reaching exawatt levels should push these studies to new extremes and likely reveal new applications. So convinced are they about the coming applications that Ditmire and colleagues have formed their own company, National Energetics, to commercialize their work.

“An exawatt laser might be used to accelerate particles to a very high energy. We might imagine accelerating electrons to energies of up to one teraelectronvolt, which is 10 times higher than the energy produced by the Stanford Linear Accelerator Center in California,” Ditmire said. “It might also be used to create a small amount of matter in the lab that has a relativistic temperature. Such temperatures are thought to exist near black holes and are very exotic states of matter.”


Shown is the large silicate glass rod that is used in the amplifier chain.


While a number of petawatt lasers already exist around the world, the Texas Petawatt Laser uses a new mixed glass approach to amplify pulses with durations down to nearly 100 fs.

The method is based on chirped pulse amplification, which involves stretching a femtosecond pulse to make it safe for amplification. After the pulse’s energy is boosted, the pulse is recompressed in time to create a high-peak-power pulse.

“We start with a very low energy femtosecond oscillator to produce broadband pulses, which are stretched using diffraction gratings in order to spread the colors of the pulse out in time,” Ditmire explained. “Then, the pulse is amplified with nonlinear optical crystals followed by large mixed glass amplifiers. Finally, the pulse transits two more gratings, which compress the colors back to a pulse duration near that of the initial seed pulse.”


Pictured is a view down the axis of the large 31-cm glass disk amplifiers.


The Texas team hopes that, by developing new kinds of glass for use in the mixed glass amplifier, it will be able to make a laser with energies exceeding 100,000 joules and a pulse duration of less than 100 fs.

“The next steps involve working with German glassmaker Schott Glass to develop the new kinds of laser glass we will need for an exawatt laser,” Ditmire said. “In parallel, we are commercializing the mixed glass architecture.”


GLOSSARY
plasma
A gas made up of electrons and ions.
Comments
Terms & Conditions Privacy Policy About Us Contact Us
back to top

Facebook Twitter Instagram LinkedIn YouTube RSS
©2016 Photonics Media
x Subscribe to Photonics Spectra magazine - FREE!