Close

Search

Search Menu
Photonics Media Photonics Buyers' Guide Photonics EDU Photonics Spectra BioPhotonics EuroPhotonics Industrial Photonics Photonics Showcase Photonics ProdSpec Photonics Handbook
More News
SPECIAL ANNOUNCEMENT
2016 Photonics Buyers' Guide Clearance! – Use Coupon Code FC16 to save 60%!
share
Email Facebook Twitter Google+ LinkedIn Comments

Nanoscale Waveguide Created for Future Photonics

Photonics.com
Jun 2011
BERKELEY, Calif., June 1, 2011 — The first true nanoscale waveguides for next-generation on-chip optical communication systems have been demonstrated by researchers at the Lawrence Berkeley National Laboratory. The new quasiparticle, called the "hybrid plasmon polariton," may throw open the doors to integrated photonic circuits and optical computing for the 21st century.

"We have directly demonstrated the nanoscale waveguiding of light at visible and near-infrared frequencies in a metal-insulator-semiconductor device featuring low loss and broadband operation," said Xiang Zhang, who led the research. "The novel mode design of our nanoscale waveguide holds great potential for nanoscale photonic applications, such as intrachip optical communication, signal modulation, nanoscale lasers and biomedical sensing."

Zhang, a principal investigator with Berkeley Lab's Materials Sciences Division and director of the University of California at Berkeley's Nano-scale Science and Engineering Center (SINAM), co-authored the study with Volker Sorger, Ziliang Ye, Rupert Oulton, Yuan Wang, Guy Bartal and Xiaobo Yin.


The hybrid plasmon polariton (HPP) nanoscale waveguide consists of a semiconductor strip separated from a metallic surface by a low-dielectric gap. Schematic shows HPP waveguide responding when a metal slit at the guide’s input end is illuminated. (Image: Zhang group)

The researchers used the hybrid plasmon polariton in a nanoscale waveguide system that is capable of shepherding lightwaves along a metal-dielectric nanostructure interface over sufficient distances for the routing of optical communication signals in photonic devices. The key is the insertion of a thin low-dielectric layer between the metal and a semiconductor strip.

"We reveal mode sizes down to 50-by-60 square nanometers using near-field scanning optical microscopy at optical wavelengths," said Sorger, a graduate student in Zhang's research group and one of the study's two lead authors. "The propagation lengths were 10 times the vacuum wavelength of visible light and 20 times that of near-infrared.

"To meet the ever-growing demand for higher data bandwidth and lower power consumption, we need to reduce the energy required to create, transmit and detect each bit of information," Sorger said. "This requires reducing physical photonic component sizes down beyond the diffraction limit of light while still providing integrated functionality."


From left, Berkeley Lab’s Xiang Zhang, Ziliang Ye and Volker Sorger have demonstrated the first true nanoscale waveguides for next-generation on-chip optical communications systems. (Image: Roy Kaltschmidt, Berkeley Lab Public Affairs)

Until recently, the size and performance of photonic devices were constrained by the interference that arises between closely spaced lightwaves. This diffraction limit results in weak photonic-electronic interactions that can be avoided only through the use of devices much larger in size than today's electronic circuits. A breakthrough came with the discovery that it is possible to couple photons with electrons by squeezing light waves through the interface between a metal/dielectric nanostructure whose dimensions are smaller than half the wavelengths of the incident photons in free space.

Directing waves of light across the surface of a metal nanostructure generates electronic surface waves (plasmons) that roll through the metal's conduction electrons (those loosely attached to molecules and atoms). The resulting interaction between plasmons and photons creates a quasiparticle called a surface plasmon polariton (SPP), which can serve as a carrier of information. Hopes were high for SPPs in nanoscale photonic devices because their wavelengths can be scaled down below the diffraction limit, but problems arose because any light signal loses strength as it passes through the metal portion of a metal-dielectric interface.


3-D image overlap of the deep subwavelength HPP mode signal (red spot) that indicates the waveguide's potential to create strong light-matter interaction for compact and highly functional photonic components. (Image: Zhang group)

"Until now, the direct experimental demonstration of low-loss propagation of deep subwavelength optical modes was not realized due to the huge propagation loss in the optical mode that resulted from the electromagnetic field being pushed into the metal," said Zhang. "With this trade-off between optical confinement and metallic losses, the use of plasmonics for integrated photonics, in particular for optical interconnects, has remained uncertain."

To solve the problem of optical signal loss, Zhang and his group proposed the hybrid plasmon polariton (HPP) concept. A semiconductor (high-dielectric) strip is placed on a metal interface, just barely separated by a thin oxide (low-dielectric) layer. This new metal-oxide-semiconductor design results in a redistribution of an incoming lightwave's energy. Instead of being concentrated in the metal, where optical losses are high, some of the lightwave's energy is squeezed into the low-dielectric gap, where optical losses are substantially less compared to the plasmonic metal.

"With this design, we create an HPP mode, a hybrid of the photonic and plasmonic modes that takes the best from both systems and gives us high confinement with low signal loss," said Ziliang Ye, the other lead author of the study. "The HPP mode is not only advantageous for downscaling physical device sizes, but also for delivering novel physical effects at the device level that pave the way for nanolasers, as well as for quantum photonics and single-photon all-optical switches."

The HPP waveguide system is fully compatible with current semiconductor/CMOS processing techniques, as well as with the silicon-on-insulator platform used today for photonic integration. This should make it easier to incorporate the technology into low-cost, large-scale integration and manufacturing schemes. Sorger believes that prototypes based on this technology could be ready within the next two years and that the first actual products could be on the market within five years.

"We are already working on demonstrating an all-optical transistor and electro-optical modulator based on the HPP waveguide system," Sorger said. "We're also now looking into biomedical applications, such as using the HPP waveguide to make a molecular sensor."

For more information, visit: www.lbl.gov


GLOSSARY
photonics
The technology of generating and harnessing light and other forms of radiant energy whose quantum unit is the photon. The science includes light emission, transmission, deflection, amplification and detection by optical components and instruments, lasers and other light sources, fiber optics, electro-optical instrumentation, related hardware and electronics, and sophisticated systems. The range of applications of photonics extends from energy generation to detection to communications and...
polariton
In solid-state physics, a quantum of the coupled-mode motion resulting from the interaction between a photon and a phonon.
Comments
Terms & Conditions Privacy Policy About Us Contact Us
back to top

Facebook Twitter Instagram LinkedIn YouTube RSS
©2016 Photonics Media
x We deliver – right to your inbox. Subscribe FREE to our newsletters.