Photonics Dictionary: T

An electronic device used to encode video and audio signals of a television camera into radio waves that are broadcast to remote receivers. The video and audio components are transmitted...

The graph of the oscillating variations composing the wave of a video signal.

The material favored for study of interaction of high-acoustic intensities with free carriers. Tellurium is the semiconductor with the largest piezoelectric constants. Tellurium oxide is the material...

A glass that is heated, then chilled (usually by an air blast) to set up internal stresses so that the surfaces are under compression. This strengthens the glass, since glass breaks only in tension,...

A technique used to suppress extreme noise amplification during digital image reconstruction that relies on smoothing and differentiation of the data by simplified least squared procedures.

Characteristic of deflected light power defined as the quadratic invariant function of the video signal amplitude.

Electromagnetic radiation with frequencies between 300 GHz and 10 THz, and existing between regions of the electromagnetic spectrum that are typically classified as the far-infrared and microwave...

A terahertz spectrometer is a scientific instrument used to measure and analyze the properties of materials in the terahertz frequency range, typically spanning from about 0.1 to 10 terahertz (THz),...

Terahertz (THz) refers to a unit of frequency in the electromagnetic spectrum, denoting waves with frequencies between 0.1 and 10 terahertz. One terahertz is equivalent to one trillion hertz, or...

A synonym for spatial coherence. See spatially coherent radiation.

An optical matrix that does not require perfection in both states of the crosspoint, so that all the optical switches can be tap-off devices in which a fraction of the optical energy is transferred...

The process of attaching a device to the end of a fiber cable to enable the beam to be transmitted farther, to pass to another device and to avoid reflection.

Refers to a notation system using a base of 3 and the numerical characters 0, 1 and 2.

A telescope that produces an erect image. Erection is achieved either by a lens (for a long instrument) or a prism (for a compact instrument). Very small terrestrial telescopes of low power may be of...

A lens similar to the Cooke triplet anastigmat, with the rear crown achromatized for improved coverage and definition. It is used in medium-speed cameras and enlargers.

A device used to detect elevation, pyramid and resolution errors in prisms and other components by bringing them into contact with the three highly polished, flat, perpendicular surfaces that form...

The section of crystal symmetry having only one-quarter of the greatest number of faces permitted by the crystal system of which the section is a member.

A contraction for "texture element." A base unit used in computer graphics that defines the surface of three-dimensional objects. Texels are obtained from texture memory and represent color to be...

An instrument used to record infrared images of large areas. The recorded data are used to produce maps in false color indicating particular themes such as vegetation, cloud cover, temperature...

A precise telescope set on a pair of rotation axes, the horizontal and vertical axes equipped with two divided circles. One circle measures horizontal angles and the other measures vertical angles....

The effect that characterizes an intense laser beam that is passed through an absorbing medium, causing the absorbed energy to produce density changes that can alter the intensity distribution of the...

A technique for detecting free radicals by their electronic spectra. The material to be studied is placed in a temperature-controlled furnace through which radiation is propagated onto a...

The process of producing a visible two-dimensional image of a scene that is dependent on differences in thermal or infrared radiation from the scene reaching the aperture of the imaging device.

A thermal-infrared camera, often referred to simply as a thermal camera, is a type of imaging device that detects infrared radiation emitted by objects due to their temperature. Unlike traditional...

Thermal interface materials (TIMs) are substances or compounds used to enhance the thermal conductivity between two surfaces in contact. These materials are primarily employed in electronic devices,...

Distortion of an optical component as a result of heat, which can influence the divergence and the mode quality of a beam passing through the component.

Operation in which the minimum detectable signal has its limits set by the thermal noise of the detector, the load resistance and the amplifier noise.

The emission of radiant energy in which the energy emitted originates in the thermal motion of the atoms or molecules of the source material.

A term referring to various processes for forming visible images outside of a camera to be photographed on ordinary film. Unlike regular infrared photography, thermal photography is an indirect...

A diode electron tube that contains a heated cathode.

The emission of free electrons by a rise in temperature of the cathode alone.

A solid-state semiconducting structure (basically one of the bolometers) that changes electrical resistance with temperature. Materially, some kind of ceramic composition is used. A thermistor has...

A device composed of dissimilar metals that, when welded together, develop a small voltage dependent upon the relative temperature between the hotter and colder junctions. Banks of thermocouples...

Examination of the processes whereby heat energy is converted into other forms of energy.

A refrigeration method based on the Peltier effect. When an electric current passes through a thermocouple of two dissimilar metals joined in two places, heat is absorbed at the cold junction and...

Also known as analog thermogram. The resultant photograph, illustrating, in tones ranging from black to white, the spatial relationship of the infrared radiation temperatures of the different details...

The instrument used to collect thermal radiation information on an object by scanning. It consists basically of a detector, a photoconductive element that converts incident radiation to an electrical...

Thermography is a technique that involves the use of an infrared imaging device, called a thermal camera or infrared camera, to detect and visualize the infrared radiation emitted by objects. This...

The production of an image on a magnetic film that is exposed to infrared radiation and heated to a point above Curie temperature in regions of the image. The image is contacted with paramagnetic...

Thermophotovoltaic (TPV) refers to a technology that converts heat energy into electricity using the principles of thermophotovoltaics. In a thermophotovoltaic system, thermal radiation from a heat...

A type of holographic film widely used for industrial applications because it is inexpensive and erasable.

A display device having a thermoplastic film as the control layer medium. The film, moving from a playoff reel, is scanned by an electron gun and melted by an RF heating unit. Deformation of the film...