Photonics Dictionary

A doped or absorbing transparent medium cut or molded into a wedge in order to measure the real and imaginary components of the refractive index. An internally reflected Gaussian beam is interfered...

An atomic force microscope (AFM) is a high-resolution imaging and measurement instrument used in nanotechnology, materials science, and biology. It is a type of scanning probe microscope that...

Attenuated total reflectance (ATR) spectroscopy is a technique used in analytical chemistry to obtain IR spectra of samples. It is particularly useful for analyzing solid and liquid samples without...

Attosecond-pump attosecond-probe spectroscopy (APAP) is an advanced technique in ultrafast spectroscopy that allows scientists to study the dynamics of electronic processes occurring on extremely...

Autofluorescence refers to the natural emission of fluorescence exhibited by certain biological structures or molecules when exposed to light. Unlike fluorescence that results from the application of...

Backscatter refers to the phenomenon in which radiation or waves are scattered backward, opposite to the direction of the incident beam. This occurs when the incident radiation encounters a target or...

A beamsplitter is an optical device used to divide a beam of light into two or more separate beams, typically by reflecting a portion of the incident light while transmitting the remainder....

An ideal body that completely absorbs all radiant energy striking it and, therefore, appears perfectly black at all wavelengths. The radiation emitted by such a body when heated is referred to as...

A blackbody source, often simply referred to as a blackbody, is a theoretical or practical physical object that absorbs all electromagnetic radiation incident upon it and emits radiation in a...

The law given by the formula: that is, the frequency of radiation emitted or absorbed by a system when E2 and E1 are the energies of the states among which transition takes place, and h is...

Broadband dielectric mirrors, also known as broadband mirrors, are optical coatings designed to efficiently reflect or transmit light over a broad range of wavelengths. These mirrors are constructed...

Carrier injection refers to the process of introducing charge carriers (either electrons or holes) into a semiconductor material. Semiconductors are materials with electrical conductivity between...

Cathode radiant sensitivity refers to the ability of a photocathode to convert incident radiant energy, typically in the form of light, into an electrical signal. Photocathodes are components used in...

A CCD camera, or charge-coupled device camera, is a type of digital camera that utilizes a CCD image sensor to capture and record images. CCD cameras are widely used in various applications,...

A CCD image sensor, or charge-coupled device image sensor, is a type of electronic device used to convert optical images into electronic signals. It is a key component in digital cameras, camcorders,...

A charge-coupled device (CCD) is a type of electronic image sensor used in various imaging devices, including digital cameras, camcorders, and scientific instruments. It consists of an integrated...

Chemical vapor deposition (CVD) equipment refers to a class of specialized apparatus used in the process of chemical vapor deposition, a technique for depositing thin films of various materials onto...

A technique for polishing silicon in which an alkaline suspension containing silicon dioxide particles creates a soft layer of silicon hydroxide, which is then removed, leaving a surface with the...

The binding of gas to a surface or in matter by chemical activity.

Chip-on-board (COB) lights refer to a type of LED lighting technology where multiple LED chips are directly mounted onto a substrate, typically a printed circuit board (PCB), without the need for...

Chirped pulse amplification (CPA) is a technique used in laser physics to amplify ultrashort laser pulses to high energies without causing damage to the amplifying medium. The method was first...

CID, or charge injection device, camera refers to a type of imaging device that utilizes a specific kind of solid-state image sensor technology. CID cameras are capable of capturing images in a...

Cinematography performed with the use of a microscope to film the actions of microscopic specimens.

The limited light-gathering area of an optical system. The area is normally restricted to an edge or outer surface of an individual component. Also known as free aperture or objective aperture. The...

A CMOS camera refers to an imaging device that employs a complementary metal-oxide-semiconductor (CMOS) image sensor to capture digital images. CMOS cameras have become ubiquitous due to their low...

Cold atoms refer to atoms that have been cooled to extremely low temperatures, typically in the microkelvin (µK) to nanokelvin (nK) range, close to absolute zero (0 Kelvin or -273.15°C). At...

A cathode that emits electrons, not with the influence of heat radiation, but by means of a high-voltage gradient at its surface.

A computer-generated hologram (CGH) is a holographic image produced using computational methods and algorithms, rather than traditional optical techniques. CGHs are generated entirely in digital form...

A confocal resonator, also known as a confocal cavity or confocal laser resonator, is a type of optical resonator configuration used in laser systems. The term confocal in this context refers to the...

Continuous wave (CW) refers to a type of signal or transmission where the signal is constant and does not vary with time. In various contexts, the term is used to describe continuous, uninterrupted...

Translucent collector developed to compensate for the partial blocking of a flat surface's collection angle that normally occurs in spectroradiometry. The device samples radiant flux according to the...

A technique used in integrated optics where a groove is cut on a substrate surface and covered by a thin film to facilitate the construction of filters, resonators, beamsplitters and grating couplers...

Custom lapping and polishing services involve specialized processes used to improve the surface finish and dimensional accuracy of components to meet specific requirements or standards. These...

The formation of a dark-colored film on a metal surface by chemical activity.

Deep ultraviolet (DUV or deep-UV) refers to a specific range of ultraviolet light with shorter wavelengths than those in the UV-A and UV-B regions. The exact wavelength range considered as DUV can...

A detector array refers to a collection of individual detector elements arranged in a two-dimensional grid or matrix format. Each element within the array is capable of detecting electromagnetic...

A dichroic mirror, also known as a dichroic beamsplitter or interference filter beamsplitter, is an optical device that selectively reflects or transmits light based on its wavelength. Dichroic...

Die bonding is a critical process in semiconductor manufacturing and microelectronics assembly, where a semiconductor die or chip is attached and electrically connected to a substrate or a package....

A diffraction grating is an optical component consisting of a surface with a periodic structure of equally spaced, parallel grooves or rulings. These rulings act as an array of closely spaced slits...

Diffuse reflectance spectroscopy (DRS) is a nondestructive analytical technique used to investigate the optical properties of materials, particularly in the field of spectroscopy. Unlike traditional...

Digital holographic microscopy (DHM) is an advanced imaging technique that combines holography and digital image processing to capture and reconstruct three-dimensional images of objects. This method...

A diode-pumped solid-state laser (DPSSL) is a type of laser system that uses semiconductor diode lasers to pump energy into a solid gain medium, resulting in the generation of coherent light. This...

Also called DLIP, a high-speed, high-resolution processing technique that uses high-power, pulsed laser systems to directly ablate micro- and nanoperiodic structures with different features on large...

An edge-emitting light-emitting diode is a type of LED structure where light emission occurs primarily along the edge of the semiconductor chip rather than from the surface. Edge-emitting LEDs are...