Photonics Dictionary

Adaptive optics (AO) is a technology used to improve the performance of optical systems by reducing the effects of atmospheric distortions. The Earth's atmosphere can cause light passing through it...

The spot on the retina where the optic nerve is attached; it is incapable of sensing light because of the absence of light receptors.

Brillouin scattering is a phenomenon in physics where an incident electromagnetic wave (usually light) interacts with acoustic phonons (quantized lattice vibrations) in a material, resulting in the...

This type of miniaturized system, referred to as CMOS qPCR, combines microfluidic technology with an ultralow-light CMOS bio-optical sensor with LEDs as the optical excitation source to achieve...

A coherent fiber bundle (CFB), also known as a coherent fiber optic bundle, is an assembly of multiple optical fibers arranged in a specific geometric pattern to maintain the spatial coherence of...

A color center, in the context of materials science and condensed matter physics, refers to a specific type of crystallographic defect in a crystalline structure that introduces color to the...

A corner cube, also known as a corner reflector or retroreflector prism, is a type of optical device used to reflect light or electromagnetic waves back towards their source with minimal deviation in...

A distributed feedback laser (DFB laser) is a type of semiconductor laser diode designed to emit coherent, narrow-bandwidth light with precise control over the wavelength. It achieves this through a...

An electro-optic modulator (EOM) is a device used to modulate the amplitude, phase, or polarization of light waves using an external electrical signal. Electro-optic modulation is a fundamental...

The term "embedded laser" typically refers to a laser device that is integrated or embedded into a larger system or structure. In this context, "embedded" implies that the laser is an integral part...

A fiber Bragg grating (FBG) is a type of optical filter that is inscribed or "written" into the core of an optical fiber. It consists of a periodic modulation of the refractive index along the length...

A fiber optic gyroscope (FOG) is a type of gyroscope that uses the interference of light waves to detect changes in orientation or rotation. It operates based on the principle of the Sagnac effect,...

A fiber optic imaging bundle is a specialized optical device composed of multiple optical fibers bundled together. Each fiber optic strand within the bundle acts as a conduit for transmitting light....

A fiber optic preform is a cylindrical glass rod or tube used as the starting material for manufacturing optical fibers. It serves as the precursor from which optical fibers are drawn. The process of...

A fiber optic sensor is a device that uses optical fibers to detect and measure physical, chemical, biological, or environmental parameters. Unlike traditional electrical sensors, fiber optic sensors...

A fiber-coupled LED (light-emitting diode) refers to an LED device that is optically coupled to an optical fiber for the purpose of efficient light transmission. In this configuration, the LED serves...

The field of view (FOV) refers to the extent of the observable world or the visible area that can be seen at any given moment through a device, such as an optical instrument, camera, or sensor. It is...

1. The sector of the Earth's surface registered upon a remote sensing device in a satellite. 2. The amount of space occupied by a component on the surface upon which it is mounted. 3. The space on an...

Freeform optics refers to the design and fabrication of optical surfaces that do not follow traditional symmetric shapes, such as spheres or aspheres. Unlike standard optical components with...

A frequency comb is a precise and regular series of equally spaced spectral lines, or frequencies, that are generated with great accuracy. The term "frequency comb" is often associated with the Nobel...

Germanium crystal refers to a crystalline form of the element germanium (Ge), which is a metalloid and semiconductor commonly used in various electronic and optical applications. Germanium crystals...

A hyperspectral imaging camera is a sophisticated imaging device capable of capturing and processing data across a wide range of wavelengths within the electromagnetic spectrum, typically from...

An infrared lens is an optical component specifically designed and optimized for transmitting, focusing, or manipulating infrared (IR) radiation within the infrared spectrum. These lenses are used in...

Infrared optics refer to optical components and systems designed to manipulate and control infrared (IR) light, which lies beyond the visible spectrum. These components are crucial for various...

Instantaneous field of view (iFOV) is a term commonly used in the context of remote sensing, imaging systems, and optical instruments. It refers to the specific portion of a scene that an optical...

Integrated photonics is a field of study and technology that involves the integration of optical components, such as lasers, modulators, detectors, and waveguides, on a single chip or substrate. The...

Integration time, in the context of optics, imaging systems, and sensor technology, refers to the duration over which a sensor collects and accumulates incoming light or signal. It is a crucial...

A lateral shearing interferometer is an optical device used in interferometry to measure phase differences between two beams of light. Interferometry is a technique that combines and analyzes...

A MEMS fiber optic switch is a microelectromechanical system (MEMS) device designed to selectively route optical signals between multiple fiber optic channels. These switches utilize miniature...

Meta-optics, also known as metasurface optics or flat optics, is a branch of optics that involves the design, fabrication, and utilization of artificial structures called metasurfaces to control and...

Metasurfaces are two-dimensional arrays of subwavelength-scale artificial structures, often referred to as meta-atoms or meta-elements, arranged in a specific pattern to manipulate the propagation of...

Micro-optics refers to the design, fabrication, and application of optical components and systems at a microscale level. These components are miniaturized optical elements that manipulate light at a...

A micro-ring resonator is a compact optical device that utilizes the resonant behavior of light within a small ring-shaped waveguide structure to selectively enhance or filter certain wavelengths of...

A microbubble resonator is a device used in photonics and optical physics for the precise manipulation of light waves. It consists of a micro-sized, gas-filled spherical cavity (the "microbubble")...

A microcomb, short for microresonator frequency comb, is a novel photonic device that generates a precise series of evenly spaced optical frequencies, akin to the teeth of a comb, across a broad...

Mie scattering, named after the German physicist Gustav Mie, refers to the scattering of electromagnetic radiation (such as light) by spherical particles. Unlike Rayleigh scattering, which is...

A molecular motor refers to a nano-sized device composed of organic molecules or other small-scale components that can convert light energy into mechanical motion at the molecular level. These...

Nanophotonics is a branch of science and technology that explores the behavior of light on the nanometer scale, typically at dimensions smaller than the wavelength of light. It involves the study and...

An optical pyrometer that is equipped with a narrow bandpass filter to transmit a limited number of wavelengths to the sensing device.

A near-infrared (NIR) camera is an imaging device designed to capture images in the near-infrared region of the electromagnetic spectrum. The near-infrared spectrum typically extends from about 700...

A nitrogen vacancy (NV) refers to a specific type of defect or impurity in a crystal lattice where a nitrogen atom replaces a carbon atom adjacent to a vacancy (an empty lattice site) in the diamond...

Optical fiber optic switches are devices used in optical fiber communication systems to selectively route optical signals from one input fiber to one or more output fibers. They play a crucial role...

Optical materials refer to substances or compounds specifically chosen for their optical properties and used in the fabrication of optical components and systems. These materials are characterized by...