Search
Menu
Trioptics GmbH - Worldwide Benchmark 4-24 LB
Photonics Marketplace
20 products

Photonics Products

Clear All Filters xbonding x
UNIBOND 8.5 Thermoplastic Adhesive
UNIBOND 8.5 Thermoplastic Adhesive
Universal Photonics Inc.
  • Type: Adhesives
  • Color: Green
  • Melting Point (°C): 77 - 85
  • Penetration Test (in): 0.003 - 0.005
UNIBOND 6.5 Thermoplastic Adhesive
UNIBOND 6.5 Thermoplastic Adhesive
Universal Photonics Inc.
  • Type: Adhesives
  • Color: Orange
  • Melting Point (°C): 57 - 65
  • Penetration Test (in): 0.010 - 0.020
AuSn Pre-Deposited AlN Ceramic Submounts
AuSn Pre-Deposited AlN Ceramic Submounts
Focuslight Technologies Inc.
  • Type: Substrates
UNIBOND 5.0 Thermoplastic Adhesive
UNIBOND 5.0 Thermoplastic Adhesive
Universal Photonics Inc.
  • Type: Adhesives
  • Color: Purple
  • Melting Point (°C): 55 - 63
  • Penetration Test (in): < 0.004
Composite Check
Composite Check
MoviTHERM, Thermography Solutions
  • Type: System
  • Compatible with: multiple irNDT methods
  • Configurable for: different geometries and materials
  • Effective on: low emissivity targets
High and Low Refractive Index Adhesives
High and Low Refractive Index Adhesives
Norland Products Inc.
  • Type: Adhesives
Target Bonding Service
Target Bonding Service
Himet Materials
  • Type: Other
AngstromBond AB9123 Heat Cure Epoxy (2.5G)
AngstromBond AB9123 Heat Cure Epoxy (2.5G)
Fiber Optic Center Inc.
  • Type: Epoxies
Optical Adhesives - OP-29
Optical Adhesives - OP-29
Dymax, Headquarters
  • Type: Adhesives
  • Durometer Hardness: D60
  • Elongation at Break, %: 110
  • Glass Transition Tg, °C: 64
Optical Alignment Adhesives - OP-60
Optical Alignment Adhesives - OP-60
Dymax, Headquarters
  • Type: Adhesives
  • CTE: 58 × 10 - 6 in/in/°C (58 ppm)
  • Durometer Hardness: D80
  • Elongation at Break, %: 2.4
Optical Positioning Epoxy - OP-81-LS
Optical Positioning Epoxy - OP-81-LS
Dymax, Headquarters
  • Type: Adhesives
  • Durometer Hardness: D90
  • Elongation at Break, %: 2
  • Glass Transition, Tg °C: 153
Optical Display Adhesive - 9702
Optical Display Adhesive - 9702
Dymax, Headquarters
  • Type: Adhesives
  • Durometer Hardness: 00-70
  • Elongation at Break, %: 137
  • Glass Transition Tg, °C: 1
Camera Module Optical Epoxy - 9803
Camera Module Optical Epoxy - 9803
Dymax, Headquarters
  • Type: Adhesives
  • Durometer Hardness: D94
  • Elongation at Break, %: 1.2
  • Glass Transition, Tg °C: 1.84
Single-Mode To-Can
Single-Mode To-Can
Sheaumann Laser Inc.
  • Type: Diode
  • Max. Power: 300mW
  • Classification (IEC): Class 3B
  • Wavelength: 780 - 1064nm
High Purity Targets
High Purity Targets
Himet Materials
  • Type: Sputtering Targets
LD-10XX-BA-15W
LD-10XX-BA-15W
Innolume GmbH
  • Type: Diode
  • Max. Power: 15W
  • Classification (IEC): Class 4
  • Wavelength: 1030 - 1130nm
  • Aperture Size: 250×1 µm
Molded Polymer Optics
Molded Polymer Optics
Syntec Optics
  • Type: Prisms & Wedges
  • Diameter / Dimension: 2.5 - 140mm
  • Birefringence: ≤200 nm/cm
  • Surface Accuracy: 0.1%
  • Surface Irregularity: 1 fr/5 mm
Custom Diamond Turned Freeform Optics
Custom Diamond Turned Freeform Optics
Syntec Optics
  • Type: Freeform Optics
  • Diameter / Dimension: 2.5 - 600mm
  • Surface Irregularity: λ/4≤
  • Surface Roughness: 20 Å≤
Custom Diamond Turned Diffraction Gratings
Custom Diamond Turned Diffraction Gratings
Syntec Optics
  • Type: Diffraction Gratings
  • Diameter / Dimension: 2.5 - 600mm
  • Surface Irregularity: λ/4 ≤
  • Surface Roughness: 80≤Å
LED401
LED401
Master Bond Inc.
  • Type: Other
  • CTE, 75 °F: 60-65 x 10-6 in/in/°C
  • Hardness After 1,000 h: 70 Shore D
  • Tensile Strength, 75 °F: 3,000-4,000 psi
Photonics Products

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.