Search
Menu

PHOTONICS ProdSpec

3715 products listed – cameras, lasers, LEDs, optics, sensors, fiber optics, spectrometers, microscopes, and more. Choose a section above, then filter products by specification.

PromotedFEATURED PREMIER PRODUCTS
Optics
High Energy Laser Mirrors
High Energy Laser Mirrors
Perkins Precision Developments LLC, United States
Typical mirror coatings include dielectric low-loss high reflectors (HR), broadband high reflectors (BBHR), dichroic mirrors, trichroic mirrors, beamsplitter mirrors and low phase shift designs.
  • Type: Mirrors
  • Surface Quality: 10-5
  • Roughness: 1-3Å rms
  • Reflectivity: > 99.9%
  • Damage Threshold: > 20 J

Optical Fabrication Accessories
HASTILITE MOV 850
HASTILITE MOV 850
Universal Photonics Inc., United States
HASTILITE MOV 850 for Clean CNC Polishing HASTILITE MOV 850 is used for critical polishing applications on a variety of glass types, glass-ceramics, and some optical crystals. HASTILITE MOV 850 was created with rare earth and other oxides that have been finely processed to produce narrow sub-micron particle size range. HASTILITE MOV 850 contains technical enhancements for improved settling, and efficient polishing characteristics.
  • Type: Polishing Material and Pads
  • pH: 7.8 - 8.8
  • Solid Content (%): 40 - 50
  • Particle Size D50 (μm): 0.3 - 0.5
  • Particle Size D99 (μm): < 2
  • Density (g/mL): 1.4 - 1.6
  • Size Availability: 1 Gallon, 1 Pint

Other Fiber Optic Products
Optical DNA Rapid Detection System - Lamppy™ Series
Optical DNA Rapid Detection System - Lamppy™ Series
OZ Optics Limited, Canada
Universal Optical DNA Rapid Detection System for Pathogens including Covid-19, Sars, Ebola, Cholera, Salmonella, etc. (Lamppy™ Series) At OZ Optics, we have developed a compact and reliable instrument capable of detecting pathogens at a fraction of the cost of qPCR machines.
  • Type: Testing Equipment

Lasers & Laser Systems
LightHUB Ultra
LightHUB Ultra
Omicron-Laserage Laserprodukte GmbH, Germany
Plug&Play Laser Light Engines with up to 7 user-upgradable wavelengths and 2 fibre outputs • Up to 7 wavelengths beam-combined and fibre coupled into one or two fibres • Over 30 different wavelengths • Upgradable by the end-user • One or two single-mode, polarization maintaining or multimode fibre coupled outputs • All lasers with direct analogue and digital modulation
  • Type: Diode

Optics
Magnesium Fluoride (MgF2) material
Magnesium Fluoride (MgF2) material
Qinhuangdao Intrinsic Crystal Technology Co. Ltd., China
Standard MgF2 blanks for excimer laser with size Ø38.1*5.5 mm; Ø50*5.5 mm, Ø60*5.5 mm, and 65*40*3.5 mm. We also supply low stress birefringence max. <15 nm size of 30*30*50 mm and 45*45*50 mm, and 100 orientation for waveplate size from Ø5.0 to 100 mm. Our MgF2 material can apply for 121/157/193/248/305 nm. These material meet ROHS, accepting by USA, Germany, Japan, and Russia buyers.
  • Type: Blanks
  • Grow method: Cz and Bridge man
  • Diameter: Ø150
  • Thickness: 100 mm
  • Orientation: 001;100
  • Application: wave plate
  • Application: PID, excimer

Optics
Plano Concave Lens - IR Grade CaF2
Plano Concave Lens - IR Grade CaF2
Lambda Research Optics Inc. (USA), United States
These plano-concave lenses are made from infrared grade calcium fluoride and are excellent for use with lasers emitting in the 2 - 5 micron range. They are supplied uncoated but antireflection coatings are available on request.
  • Type: Lenses
  • Material: IR Laser Grade CaF2
  • Surface Flatness: < λ / 4 @ 633 nm
  • Surface Quality: <20/10 (both sides)

Laser Beam Profilers
Z-Trak LP2C
Z-Trak LP2C
Teledyne DALSA, Machine Vision OEM Components, Canada
  • Type: Camera
  • NFOV-FFOV (mm): 582-1130
  • Unified Measurement Space: 360°
  • Standoff Distance: 558 mm
  • Z-Resolution: 81-156 µm
  • X-Resolution: 160-312 µm

Optics
Parallel Windows
Parallel Windows
CASTECH INC., China
Most sizes with λ/20 transmitted wavefront and 10-5 surface quality are available; a variety of coatings are available; custom designs for other sizes and coatings are available upon request.
  • Type: Windows
  • Material: BK7 or UV Fused Silica
  • Diameter Tolerance: +0/-0.15 mm
  • Thickness Tolerance: ±0.25 mm
  • Clear Aperture: >Central 85% of diam

Optics
Graded Reflectivity Mirrors
Graded Reflectivity Mirrors
BMV Optical Technologies Inc., Canada
Leading manufacturer of custom Gaussian Reflectivity Mirrors (GRMs). Substrate materials includes both glass and crystal materials such as BK 7, Fused Silica, and ZnSE at diameters from 5 to 25.4 mm. The spectral range of our deposited Gaussian and Super-Gaussian coating geometries is from the VIS to the FIR and available in any custom rotationally symmetrical variations; both standard and inverted.
  • Type: Mirrors
  • AR Coating (R avg % @ single wavelength) Radius Tolerance (%): ≤ 0.2
  • Central Reflectance: ± 1.0
  • Waist Size (mm): ± 0.1
  • N Order (%): ± 5.0
  • Laser Damage Threshold Sub 28% R: 1800 MW/cm²
  • Laser Damage Threshold Sub 45% R: 500 MV/cm²

Optics
Starlight Lens
Starlight Lens
FOCtek Photonics Inc., China
Used for matching 2/3", 1" and 4/3" CCD and CMOS in intelligent transportation systems. The resolution is up to 10 MP and the large aperture is ideal for low Lux ITS cameras. Applications include precision instruments, medical equipment, automation equipment, automatic optical inspection, security and road monitoring.
  • Type: Lenses

Other Fiber Optic Products
VIS (400 - 680 nm) PM Fiber Optic Couplers
VIS (400 - 680 nm) PM Fiber Optic Couplers
G&H, United Kingdom
The G&H fused visible wavelength RGB (red, blue and green) polarization-maintaining (PM) 1×2 and 2×2 fiber optic couplers, taps and optical signal splitters offer high extinction ratio (ER) with polarization launch into a single or dual axis (slow axis and fast axis).
  • Type: Couplers
  • Minimum Extinction Ratio: 18 - 20 dB
  • Excess Loss: <0.5 dB/<0.8 dB
  • Operating Temperature: 0 to +70 ºC
  • Storage Temperature: -40 to +85 ºC
  • Coupling Ratio: see datasheet
  • Return Loss: ≥30 dB

Optics
Optical Isolator
Optical Isolator
Lambda Research Optics Inc. (USA), United States
Optical isolators are a combination of a linear polarizer and a Quartz quarter wave retardation plate. These optical isolators are manufactured using a polarizing cube beamsplitter and a quartz quarter-wave plate. They are antireflection coated for the wavelength of interest.
  • Type: Beamsplitters
  • Material: BK7A and Quartz
  • Surface Quality: <20/10
  • Transmitted Wavefront: < λ/4 @ 633 nm

Lasers & Laser Systems
Wavelength Stabilized Diode
Wavelength Stabilized Diode
PhotonTec Berlin GmbH, Germany
Wavelength stabilized laser diodes with narrow wavelength tolerance and much lower wavelength variation on current and temperature.
  • Type: Diode
  • Fiber Core Diameter: 105 and 200
  • Numerical Aperture: 0.22

LEDs & Emitters
High-Power GaAIAs IRLED Illuminator - OD-663-850
High-Power GaAIAs IRLED Illuminator - OD-663-850
Opto Diode Corporation, United States
High-Power GaAlAs IRLED Illuminators: -Ultra-high optical output -850 nm IR Illuminator - Standard 2-lead TO-66 electrically-isolated package -Very uniform optical beam -Ideal for night vision illumination
  • Type: Through Hole
  • Lead soldering temperature: 260 °C
  • Reverse voltage: 5 V
  • Spectral bandwidth @50%: 40 nm
  • Rise time: 100 nsec
  • Fall time: 100 nsec
  • Reverse Breakdown Voltage: 5 V

Other Fiber Optic Products
Fitel S185 Fusion Splicer Series
Fitel S185 Fusion Splicer Series
3SAE Technologies Inc., United States
The FITEL S185 Fusion Splicer series features six splicers: The S185HS, S185PM, S185LDF, S185PM-LDF, S185ROF (Ring of Fire) and S185PM-ROF. Ring of Fire models equip the powerful arc-discharging by three electrodes instead of two electrodes.
  • Type: Splicers

Lasers & Laser Systems
DPSS-XT Laser Series
DPSS-XT Laser Series
LASOS Lasertechnik GmbH, Germany
•Single frequency operation •Excellent long-term stability •Good beam quality •Low noise
  • Type: Solid-State

Optics
Plano Concave Mirror Substrates
Plano Concave Mirror Substrates
Lambda Research Optics Inc. (USA), United States
These plano-concave BK7 or UV fused silica mirror blanks are polished to λ/10 surface accuracy with a laser grade finish on both sides. Select a coating appropriate to your application. Special coating requirements accepted.
  • Type: Mirrors
  • Material: UV Fused Silica or BK7A
  • Surface Flatness: < λ / 10 @ 633 nm
  • Surface Quality: <10/5 (both sides)

Stages
Rotary Positioners
  • Type: Rotation Stage
  • Non-Magnetic Materials: Available
  • UHV Compatibility: Yes

Other Fiber Optic Products
AUTOCOATER 2
AUTOCOATER 2
NYFORS Teknologi AB, Sweden
Designed for high strength applications, this advanced and flexible recoating system restores the protective acrylate coating on spliced and stripped optical fibers. It is fully automatic, allowing for operator skill independent operation in factory environments with high productivity and cost advantages. Recoating material is automatically injected into silicone moulds identical to those used in NYFORS manual recoaters. They are available in different sizes and shapes to cover a wide range of...
  • Type: Other

Cameras
Lt-C4020B / Lt-M4020B
Lt-C4020B / Lt-M4020B
Teledyne Lumenera, Canada
With a resolution of 12 MP, the imaging clarity of the Sony Pregius™ IMX304 has been designed into a compact form factor suitable for many imaging applications. The Lt-C/M4020B Lt Series board level camera offers the full set of camera features that are expected in today’s imagining industry.
  • Type: CMOS

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.