PHOTONICS ProdSpec

HASTILITE MOV 850 for Clean CNC Polishing HASTILITE MOV 850 is used for critical polishing applications on a variety of glass types, glass-ceramics, and some optical crystals. HASTILITE MOV 850 was created with rare earth and other oxides that have been finely processed to produce narrow sub-micron particle size range. HASTILITE MOV 850 contains technical enhancements for improved settling, and efficient polishing characteristics.

Achromatic doublets/triplets consist of low-index, symmetrical convex crown glass elements which are cemented between identical high-index meniscus flint glass elements. These lenses are useful in axial imaging applications.

Used for matching 2/3", 1" and 4/3" CCD and CMOS in intelligent transportation systems. The resolution is up to 10 MP and the large aperture is ideal for low Lux ITS cameras. Applications include precision instruments, medical equipment, automation equipment, automatic optical inspection, security and road monitoring.

Housing options: bare board, open housing, and closed housing

Standard MgF2 blanks for excimer laser with size Ø38.1*5.5 mm; Ø50*5.5 mm, Ø60*5.5 mm, and 65*40*3.5 mm. We also supply low stress birefringence max. <15 nm size of 30*30*50 mm and 45*45*50 mm, and 100 orientation for waveplate size from Ø5.0 to 100 mm. Our MgF2 material can apply for 121/157/193/248/305 nm. These material meet ROHS, accepting by USA, Germany, Japan, and Russia buyers.

We manufacture the most challenging polymer optic components, modules, and assemblies for leading defense, medical, and commercial applications with advanced technology and an experienced team. Each design is different and custom made.

•Single frequency operation •Excellent long-term stability •Good beam quality •Low noise

Designed for high strength applications, this advanced and flexible recoating system restores the protective acrylate coating on spliced and stripped optical fibers. It is fully automatic, allowing for operator skill independent operation in factory environments with high productivity and cost advantages. Recoating material is automatically injected into silicone moulds identical to those used in NYFORS manual recoaters. They are available in different sizes and shapes to cover a wide range of...

Most sizes with λ/20 transmitted wavefront and 10-5 surface quality are available; a variety of coatings are available; custom designs for other sizes and coatings are available upon request.

Leading manufacturer of custom Gaussian Reflectivity Mirrors (GRMs). Substrate materials includes both glass and crystal materials such as BK 7, Fused Silica, and ZnSE at diameters from 5 to 25.4 mm. The spectral range of our deposited Gaussian and Super-Gaussian coating geometries is from the VIS to the FIR and available in any custom rotationally symmetrical variations; both standard and inverted.

Typical mirror coatings include dielectric low-loss high reflectors (HR), broadband high reflectors (BBHR), dichroic mirrors, trichroic mirrors, beamsplitter mirrors and low phase shift designs.

The manual MicroStage-BX fits onto Olympus upright BX microscopes and uses manual micrometers to control XY motion. Continuous internal position locking combined with excellent stability makes this stage an ideal base for our high resolution piezo nanopositioning stages.

These plano-concave BK7 or UV fused silica mirror blanks are polished to λ/10 surface accuracy with a laser grade finish on both sides. Select a coating appropriate to your application. Special coating requirements accepted.

Plug&Play Laser Light Engines with up to 7 user-upgradable wavelengths and 2 fibre outputs • Up to 7 wavelengths beam-combined and fibre coupled into one or two fibres • Over 30 different wavelengths • Upgradable by the end-user • One or two single-mode, polarization maintaining or multimode fibre coupled outputs • All lasers with direct analogue and digital modulation

High-Power GaAlAs IRLED Illuminators: -Ultra-high optical output -850 nm IR Illuminator - Standard 2-lead TO-66 electrically-isolated package -Very uniform optical beam -Ideal for night vision illumination

The FITEL S185 Fusion Splicer series features six splicers: The S185HS, S185PM, S185LDF, S185PM-LDF, S185ROF (Ring of Fire) and S185PM-ROF. Ring of Fire models equip the powerful arc-discharging by three electrodes instead of two electrodes.

With a resolution of 12 MP, the imaging clarity of the Sony Pregius™ IMX304 has been designed into a compact form factor suitable for many imaging applications. The Lt-C/M4020B Lt Series board level camera offers the full set of camera features that are expected in today’s imagining industry.

These plano-concave lenses are made from infrared grade calcium fluoride and are excellent for use with lasers emitting in the 2 - 5 micron range. They are supplied uncoated but antireflection coatings are available on request.