Close

Search

Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook
Photonics ProdSpec

PHOTONICS ProdSpec

Over 3000 products listed – cameras, lasers, LEDs, optics, sensors, fiber optics, spectrometers, microscopes, and more. Choose a category above, then filter products by specification or submit a Custom RFQ to get quotes from multiple suppliers.

PromotedPREMIER PRODUCTS
Plano Concave Lens - IR Grade CaF2
Plano Concave Lens - IR Grade CaF2
Lambda Research Optics Inc. (USA), United States
REQUEST A QUOTEVISIT WEBSITE
These plano-concave lenses are made from infrared grade calcium fluoride and are excellent for use with lasers emitting in the 2 - 5 micron range. They are supplied uncoated but antireflection coatings are available on request.
  • Type: Lenses
  • Material: IR Laser Grade CaF2
  • Surface Flatness: < λ / 4 @ 633 nm
  • Surface Quality: <20/10 (both sides)

MicroStage-BX
MicroStage-BX
Mad City Labs Inc., United States
REQUEST A QUOTEVISIT WEBSITE
The manual MicroStage-BX fits onto Olympus upright BX microscopes and uses manual micrometers to control XY motion. Continuous internal position locking combined with excellent stability makes this stage an ideal base for our high resolution piezo nanopositioning stages.
  • Type: Nanopositioning Stage
  • Graduation: 10 µm
  • Vernier graduations: 1 µm
  • Body Material: Aluminum

Cube Polarizing Beamsplitters
Cube Polarizing Beamsplitters
EKSMA Optics, Lithuania
REQUEST A QUOTEVISIT WEBSITE
BK7 or UVFS cube polarizing beamsplitters optimized for 280 nm, 308 nm, 355 nm 532 nm, 633 nm, 780 nm, 1064 nm wavelengths. Polarizing film is coated on the internal face of a cube beamsplitter. Thin film polarizers utilize the polarization which occurs on reflection deviated by 90º angle.
  • Type: Beamsplitters
  • Surface Quality: 40-20 scratch/dig
  • Surface Flatness: λ/4 @ 633 nm
  • Beam Deviation: <3 arcmin
  • LIDT @ 1064 nm: 0.3 J/cm2

Plano Concave Mirror Substrates
Plano Concave Mirror Substrates
Lambda Research Optics Inc. (USA), United States
REQUEST A QUOTEVISIT WEBSITE
These plano-concave BK7 or UV fused silica mirror blanks are polished to λ/10 surface accuracy with a laser grade finish on both sides. Select a coating appropriate to your application. Special coating requirements accepted.
  • Type: Mirrors
  • Material: UV Fused Silica or BK7A
  • Surface Flatness: < λ / 10 @ 633 nm
  • Surface Quality: <10/5 (both sides)

Custom Polymer Optics
Custom Polymer Optics
Diverse Optics Inc., United States
REQUEST A QUOTEVISIT WEBSITE
We manufacture the most challenging polymer optic components, modules, and assemblies for leading defense, medical, and commercial applications with advanced technology and an experienced team. Each design is different and custom made.
  • Type: Lenses

Lt-C4020B / Lt-M4020B
Lt-C4020B / Lt-M4020B
Teledyne Lumenera, Canada
REQUEST A QUOTEVISIT WEBSITE
With a resolution of 12 MP, the imaging clarity of the Sony® Pregius™ IMX304 has been designed into a compact form factor suitable for many imaging applications. The Lt-C/M4020B Lt Series board level camera offers the full set of camera features that are expected in today’s imagining industry.
  • Type: CMOS

Polarizing Beamsplitter Cubes
Polarizing Beamsplitter Cubes
Perkins Precision Developments LLC, United States
REQUEST A QUOTEVISIT WEBSITE
Perkins Precision offers high energy, laser-line beamsplitter cubes. Our adhesive-free optical assembly process is ideal for applications where outgassing and laser damage threshold are primary concerns. These polarizing and dichroic cube beamsplitters utilize IBS coatings which result in high transmission, high extinction ratio and λ/10 wavefront quality.
  • Type: Beamsplitters
  • Surface Quality: 10-5
  • Damage Threshold: >10 J
  • Wavefront: λ/10 - λ/20
  • Ext. Ratio Tp/Ts: >1000:1

Spherical Mirrors
Spherical Mirrors
A.R.W. Optical Corporation, United States
REQUEST A QUOTEVISIT WEBSITE
High-quality custom spherical mirrors for all UV to IR applications. Prototyping through volume-production quantities. Superior image quality. Consistent part-to-part performance. High-performance and durable optical coatings. Custom sizes available.
  • Type: Mirrors
  • Surface Accuracy: better than λ/10 @632.8 nm
  • Surface Quality: 10-5, 20-10, 40-20, 60-40
  • Centration: 30 arcsec
  • Clear Aperture: >90%

Cylindrical Lenses
Cylindrical Lenses
A.R.W. Optical Corporation, United States
REQUEST A QUOTEVISIT WEBSITE
High-quality custom cylindrical lenses for all UV to IR applications. Prototyping through volume-production quantities. High concentricity. Consistent part-to-part performance. Superior image quality. Custom sizes available.
  • Type: Lenses
  • Surface Accuracy: better than λ/2 @632.8 nm
  • Surface Quality: 10-5, 20-10, 40-20, 60-40
  • Radius: 3 mm and up

Custom Aspheric Lenses
Custom Aspheric Lenses
LaCroix Precision Optics, United States
REQUEST A QUOTEVISIT WEBSITE
Custom aspheres made to print, right here in the United States. We offer 2D and 3D metrology if required to qualify your parts are made to specification. Our coatings range from 280 - 2400 nm (high UV to SWIR), BBARs, V-coats, high laser damage resistance, hydrophobic coatings, dielectric mirrors, beam splitters, and custom coatings.
  • Type: Lenses

Large Optical Flat Mirror
Large Optical Flat Mirror
Precision Optical, United States
REQUEST A QUOTEVISIT WEBSITE
Custom coating(s), custom configuration(s), material type Options: fused silica, N-BK7, Zerodur or CCZ, Supremax. Custom metrology services; large aperture interferometery; customer furnished material.
  • Type: Mirrors
  • Surface Flatness: ≤ λ/40
  • Surface Quality: ≤ 10/5
  • Dimensions: ± 0.1 mm

Magnesium Fluoride (MgF2) material
Magnesium Fluoride (MgF2) material
Qinhuangdao Intrinsic Crystal Technology Co. Ltd., China
REQUEST A QUOTEVISIT WEBSITE
Standard MgF2 blanks for excimer laser with size Ø38.1*5.5 mm; Ø50*5.5 mm, Ø60*5.5 mm, and 65*40*3.5 mm. We also supply low stress birefringence max. <15 nm size of 30*30*50 mm and 45*45*50 mm, and 100 orientation for waveplate size from Ø5.0 to 100 mm. Our MgF2 material can apply for 121/157/193/248/305 nm. These material meet ROHS, accepting by USA, Germany, Japan, and Russia buyers.
  • Type: Blanks
  • Grow method: Cz and Bridge man
  • Diameter: Ø150
  • Thickness: 100 mm
  • Orientation: 001;100
  • Application: wave plate
  • Application: PID, excimer

Single Frequency CW Laser Series
Single Frequency CW Laser Series
UniKLasers, Scotland
REQUEST A QUOTEVISIT WEBSITE
Single frequency, continuous wave DPSS lasers from the UV to NIR at mid- to high power outputs. With long operational lifetime, outstanding beam characteristics, high power and spectral stability, extremely low noise, small footprint, and versatile software package – these lasers are designed for integration with existing systems and research environments. Remote service packages available.
  • Type: Solid-State
  • Linewidth ([email protected]): ≤ 0.5 MHz
  • Operation: CW; SLM
  • Spectral Stability: ±1 pm
  • Output Power Stability: ≤ 2%
  • Output Power Noise: ≤ 0.1 rms
  • Software Controlled: Yes

Optical Isolator
Optical Isolator
Lambda Research Optics Inc. (USA), United States
REQUEST A QUOTEVISIT WEBSITE
Optical isolators are a combination of a linear polarizer and a Quartz quarter wave retardation plate. These optical isolators are manufactured using a polarizing cube beamsplitter and a quartz quarter-wave plate. They are antireflection coated for the wavelength of interest.
  • Type: Beamsplitters
  • Material: BK7A and Quartz
  • Surface Quality: <20/10
  • Transmitted Wavefront: < λ/4 @ 633 nm

Wavelength Stabilized Diode
Wavelength Stabilized Diode
PhotonTec Berlin GmbH, Germany
REQUEST A QUOTEVISIT WEBSITE
Wavelength stabilized laser diodes with narrow wavelength tolerance and much lower wavelength variation on current and temperature.
  • Type: Diode
  • Fiber Core Diameter: 105 and 200
  • Numerical Aperture: 0.22

Graded Reflectivity Mirrors
Graded Reflectivity Mirrors
BMV Optical Technologies Inc., Canada
REQUEST A QUOTEVISIT WEBSITE
Leading manufacturer of custom Gaussian Reflectivity Mirrors (GRMs). Substrate materials includes both glass and crystal materials such as BK 7, Fused Silica, and ZnSE at diameters from 5 to 25.4 mm. The spectral range of our deposited Gaussian and Super-Gaussian coating geometries is from the VIS to the FIR and available in any custom rotationally symmetrical variations; both standard and inverted.
  • Type: Mirrors
  • AR Coating (R avg % @ single wavelength) Radius Tolerance (%): ≤ 0.2
  • Central Reflectance: ± 1.0
  • Waist Size (mm): ± 0.1
  • N Order (%): ± 5.0
  • Laser Damage Threshold Sub 28% R: 1800 MW/cm²
  • Laser Damage Threshold Sub 45% R: 500 MV/cm²

LightHUB Ultra
LightHUB Ultra
Omicron-Laserage Laserprodukte GmbH, Germany
REQUEST A QUOTEVISIT WEBSITE
Plug&Play Laser Light Engines with up to 7 user-upgradable wavelengths and 2 fibre outputs • Up to 7 wavelengths beam-combined and fibre coupled into one or two fibres • Over 30 different wavelengths • Upgradable by the end-user • One or two single-mode, polarization maintaining or multimode fibre coupled outputs • All lasers with direct analogue and digital modulation
  • Type: Diode

Fitel S185 Fusion Splicer Series
Fitel S185 Fusion Splicer Series
3SAE Technologies Inc., United States
REQUEST A QUOTEVISIT WEBSITE
The FITEL S185 Fusion Splicer series features six splicers: The S185HS, S185PM, S185LDF, S185PM-LDF, S185ROF (Ring of Fire) and S185PM-ROF. Ring of Fire models equip the powerful arc-discharging by three electrodes instead of two electrodes.
  • Type: Splicers

Prisms
Prisms
Gurley Precision Instruments Inc., United States
REQUEST A QUOTEVISIT WEBSITE
We offer a variety of prisms: wedge, Brewster angle dispersing, Littrow dispersing, 60° equilateral dispersing, roof, poro, penta, right angle, dove, retrorefelctor prisms and other types. Products are used in fire-control systems, optical encoders, guidance systems, and other types of optical, electro-optical, and laser based systems operating in either the visible, infrared, or ultraviolet portion of the spectrum.
  • Type: Prisms & Wedges

Linea ML CMOS
Linea ML CMOS
Teledyne DALSA, Machine Vision OEM Components, Canada
REQUEST A QUOTEVISIT WEBSITE
In addition to monochrome/HDR imaging, customers are able to capture multifield (brightfield, darkfield and backlit) images in a single scan with pulsed lighting using monochrome models. These new models are also able to capture RGB or RGB+NIR images in a single scan with continuous wave lighting using color or multispectral models.
  • Type: CMOS

Starlight Lens
Starlight Lens
FOCtek Photonics Inc., China
REQUEST A QUOTEVISIT WEBSITE
Used for matching 2/3", 1" and 4/3" CCD and CMOS in intelligent transportation systems. The resolution is up to 10 MP and the large aperture is ideal for low Lux ITS cameras. Applications include precision instruments, medical equipment, automation equipment, automatic optical inspection, security and road monitoring.
  • Type: Lenses

Nano-Bio
Nano-Bio
Mad City Labs Inc., United States
REQUEST A QUOTEVISIT WEBSITE
The Nano-Bio Series are ultralow profile, two-axis piezo nanopositioning systems. The low profile design allows it to be easily integrated into existing inverted microscopes, AFMs and other instrumentation where space is limited. The large center aperture allows the Nano-Bio to accommodate the lenses of all major microscope manufacturers.
  • Type: Nanopositioning Stage
  • Stability: High
  • Control: Closed Loop
  • Type: Low profile, two axis

Parallel Windows
Parallel Windows
CASTECH INC., China
REQUEST A QUOTEVISIT WEBSITE
Most sizes with λ/20 transmitted wavefront and 10-5 surface quality are available; a variety of coatings are available; custom designs for other sizes and coatings are available upon request.
  • Type: Windows
  • Material: BK7 or UV Fused Silica
  • Diameter Tolerance: +0/-0.15 mm
  • Thickness Tolerance: ±0.25 mm
  • Clear Aperture: >Central 85% of diam

Custom Board Lenses
Custom Board Lenses
Westech Optical Corporation, United States
REQUEST A QUOTEVISIT WEBSITE
High performance custom and stock board lenses.
  • Type: Lenses

Rotary Positioners
Rotary Positioners
SmarAct Inc., United States
REQUEST A QUOTEVISIT WEBSITE
There are different models available. Please check the data sheet.
  • Type: Rotation Stage
  • Non-Magnetic Materials: Available
  • UHV Compatibility: Yes

Alvium 1800 U-500
Alvium 1800 U-500
Allied Vision Technologies GmbH, Germany
REQUEST A QUOTEVISIT WEBSITE
  • Type: CMOS

High-Power GaAIAs IRLED Illuminator - OD-663-850
High-Power GaAIAs IRLED Illuminator - OD-663-850
Opto Diode Corporation, United States
REQUEST A QUOTEVISIT WEBSITE
High-Power GaAlAs IRLED Illuminators: -Ultra-high optical output -850 nm IR Illuminator - Standard 2-lead TO-66 electrically-isolated package -Very uniform optical beam -Ideal for night vision illumination
  • Type: Through Hole
  • Lead soldering temperature: 260 °C
  • Reverse voltage: 5 V
  • Spectral bandwidth @50%: 40 nm
  • Rise time: 100 nsec
  • Fall time: 100 nsec
  • Reverse Breakdown Voltage: 5 V

GM-1005 Digital Encoder Galvano Scanner
GM-1005 Digital Encoder Galvano Scanner
Canon U.S.A. Inc., Industrial Products Div., United States
REQUEST A QUOTEVISIT WEBSITE
  • Type: 2 Axis

Corner Cube Retroreflector
Corner Cube Retroreflector
Precision Optical, United States
REQUEST A QUOTEVISIT WEBSITE
Optional substrate type: N-BK7, fused silica.
  • Type: Prisms & Wedges
  • Beam Deviation: ± 1 to 30 arcsec
  • Surface Flatness: ≤ λ/8 to λ/40
  • Surface Quality: ≤ 60/40 to 10/5
  • Dimensions: ± 0.1 mm

back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2021 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x Wish you were here? Click to become an exhibitor today.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.