Search
Menu
Alluxa - Optical Coatings LB 8/23
Photonics Marketplace
111 products

Optomechanics & Positioning

Clear All Filters xbio-medical xOptomechanics & Positioning x
Rotary Positioners
Rotary Positioners
SmarAct Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Rotation Stage
  • Max. Load: 2.5kg
  • Max. Rotation Speed (degrees/s): 45
  • Stage Type: Motorized
  • Non-Magnetic Materials: Available
  • UHV Compatibility: Yes
Premier Product
Dual-Axis Galvanometer Scan Heads
Dual-Axis Galvanometer Scan Heads
Thorlabs Inc.
  • Category: Optomechanics & Positioning / Galvanometers
  • Type: 2 Axis
  • Max. Beam Diameter: 45mm
  • Max. Scan Angle X (degrees): 22.5
  • Max. Scan Angle Y (degrees): 22.5
  • Small Step Response (µs): 1200
  • Repeatablility (µrad): 10
  • Linearity (%): 99.9
  • Control Electronics: Analog Servo Amplifiers
  • Gain Drift: 50 ppm/°C
  • Mirror Substrate: Fused Silica/SiC/Si
5 mm Linear Stage with Piezoelectric Inertia Drive
5 mm Linear Stage with Piezoelectric Inertia Drive
Thorlabs Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 1kg
  • Mass: 32g
  • Height: 6.5mm
  • X-Axis Travel Length: 5mm
  • Max. Linear Speed: 10mm/s
  • Stage Type: Motorized
  • Connector Type: 15-Pin Female D-Sub
  • Max. Step Frequency: 20 kHz
  • Operation: Open-Loop
H-840 High Performance High Value Hexapod
H-840 High Performance High Value Hexapod
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Category: Optomechanics & Positioning / Hexapods
  • Type: Hexapod
  • Max. Load: 40kg
  • Mass: 5kg
  • Height: 25cm
  • X-Axis Range: 10cm
  • Y-Axis Range: 10cm
  • Z-Axis Range: 5cm
HexGen HEX500-350HL
HexGen HEX500-350HL
Aerotech Inc.
  • Category: Optomechanics & Positioning / Hexapods
  • Type: Hexapod
  • Max. Load: 200kg
  • Mass: 49kg
  • Height: 350mm
  • X-Axis Range: 100mm
  • Y-Axis Range: 110mm
  • Z-Axis Range: 54mm
  • Linear Accuracy: ±0.5 μm
  • Linear Resolution: 20 nm
  • Rotary Accuracy: ±2.5 μrad
HexGen HEX300-230HL
HexGen HEX300-230HL
Aerotech Inc.
  • Category: Optomechanics & Positioning / Hexapods
  • Type: Hexapod
  • Max. Load: 45kg
  • Mass: 12kg
  • Height: 230mm
  • X-Axis Range: 55mm
  • Y-Axis Range: 60mm
  • Z-Axis Range: 25mm
  • Linear Accuracy: ±0.5 μm
  • Linear Resolution: 20 nm
  • Rotary Accuracy: ±2.5 μrad
HexGen HEX150-140HL
HexGen HEX150-140HL
Aerotech Inc.
  • Category: Optomechanics & Positioning / Hexapods
  • Type: Hexapod
  • Max. Load: 7.5kg
  • Mass: 2.3kg
  • Height: 141mm
  • X-Axis Range: 40mm
  • Y-Axis Range: 40mm
  • Z-Axis Range: 16mm
  • Linear Accuracy: ±0.75 µm
  • Linear Resolution: 20 nm
  • Rotary Accuracy: ±7.3 µrad
AGV-HP(O)
AGV-HP(O)
Aerotech Inc.
  • Category: Optomechanics & Positioning / Galvanometers
  • Type: 2 Axis
  • Max. Beam Diameter: 30mm
  • Max. Scan Angle X (degrees): 40
  • Max. Scan Angle Y (degrees): 40
  • Small Step Response (µs): 270
  • Repeatablility (µrad): 0.4
  • Linearity (%): 0.005
  • Long-Term Drift: 10 µrad / 12 hr
  • Max. Positioning Speed: 75 m/s
  • Processing Speed: 5 m/s
AGV-SPO
AGV-SPO
Aerotech Inc.
  • Category: Optomechanics & Positioning / Galvanometers
  • Type: 2 Axis
  • Max. Beam Diameter: 35mm
  • Max. Scan Angle X (degrees): 20
  • Max. Scan Angle Y (degrees): 20
  • Small Step Response (µs): 700
  • Repeatablility (µrad): 0.6
  • Linearity (%): 0.005
  • Accuracy: 50 µrad pk-pk
  • Beam Aperture: 14 mm
  • Dither: 0.3 µrad
AGV3D
AGV3D
Aerotech Inc.
  • Category: Optomechanics & Positioning / Galvanometers
  • Type: 3 Axis
  • Max. Beam Diameter: 12mm
  • Overall Height (no mirror): 148.6mm
  • Weight: 11.2kg
  • Long-Term Drift: 10 µrad / 12 hr
  • Max. Positioning Speed: 400 m/s
  • Min. Incremental Motion: 0.05 µm
Galvanometer: dynAXIS3 M
Galvanometer: dynAXIS3 M
SCANLAB GmbH
  • Category: Optomechanics & Positioning / Galvanometers
  • Type: 1 Axis
  • Small Step Response (µs): 0.4
  • Repeatablility (µrad): 1
  • Overall Height (no mirror): 74mm
  • Weight: 300g
  • Nonlinearity: <0.1%
UniSlide® Assemblies
UniSlide® Assemblies
Velmex Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 182kg
  • Height: 7.95cm
  • X-Axis Travel Length: 106.68cm
  • Y-Axis Travel Length: 106.68cm
  • Stage Type: Manual,Motorized
  • Driver Included?: No
H112 ProScan Stage
H112 ProScan Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 25kg
  • X-Axis Travel Length: 302mm
  • Y-Axis Travel Length: 302mm
  • Stage Type: Motorized
  • Linear Slides: 4 mm precision bearings
  • Minimum Step Size: 0.04 µm
  • Stepper Motor: High precision stepper
Linear Positioners
Linear Positioners
SmarAct Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 3kg
  • Height: 8.5mm
  • X-Axis Travel Length: 51mm
  • Max. Linear Speed: 2cm/s
  • Stage Type: Motorized
  • Cryogenic Option: Yes
  • Non-Magnetic Materials: Available
  • Sensor Resolution: 1 nm
SmarPod
SmarPod
SmarAct Inc.
  • Category: Optomechanics & Positioning / Hexapods
  • Type: Hexapod
  • Max. Load: 500g
  • Mass: 200g
  • Height: 42mm
  • X-Axis Range: 11mm
  • Y-Axis Range: 11mm
  • Z-Axis Range: 6mm
  • Non-Magnetic Materials: Available
  • Smallest Increment: 1 nm
  • UHV Compatibility: Yes
PZ-2000FT Series Automated Stage
PZ-2000FT Series Automated Stage
Applied Scientific Instrumentation Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 2kg
  • X-Axis Travel Length: 120mm
  • Y-Axis Travel Length: 110mm
  • Max. Linear Speed: 7mm/s
  • Stage Type: Motorized
  • Driver Included?: Yes
  • Maximum Continuous Output: 13 mA
  • PZ-2150 Travel Range: 150 μm
  • PZ-2300 Travel Range: 300 μm
QNP2 Series
QNP2 Series
Aerotech Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Nanopositioning Stage
  • Max. Load: 3kg
  • Mass: 1.2kg
  • Height: 20mm
  • X-Axis Travel Length: 200µm
  • Y-Axis Travel Length: 200µm
  • Z-Axis Travel Length: 0µm
  • Bi-dir. Repeatability: 1 nm
  • Linear Resolution: 0.1 nm
  • Linearity: 0.01 %
ANT130XY
ANT130XY
Aerotech Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Nanopositioning Stage
  • Max. Load: 12kg
  • Mass: 8.9kg
  • Height: 85mm
  • X-Axis Travel Length: 160mm
  • Y-Axis Travel Length: 160mm
  • Max. Linear Speed: 350mm/s
  • Bi-dir. Repeatability: ±75 nm
  • Linear Accuracy: ±300 nm
  • Linear Resolution: 1 nm
H-811 6-Axis Motion Miniature Hexapod
H-811 6-Axis Motion Miniature Hexapod
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Category: Optomechanics & Positioning / Hexapods
  • Type: Hexapod
  • Max. Load: 5kg
  • Mass: 2.2kg
  • Height: 11cm
  • X-Axis Range: 34cm
  • Y-Axis Range: 34cm
  • Z-Axis Range: 21cm
H-845 Heavy-Duty Hexapod
H-845 Heavy-Duty Hexapod
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Category: Optomechanics & Positioning / Hexapods
  • Type: Hexapod
  • Max. Load: 1000kg
  • Mass: 120kg
  • Height: 66cm
  • X-Axis Range: 3.4cm
  • Y-Axis Range: 3.2cm
  • Z-Axis Range: 1.3cm
A-322 Planar Air Bearing Stage
A-322 Planar Air Bearing Stage
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Category: Optomechanics & Positioning / Stages
  • Type: Nanopositioning Stage
  • Max. Load: 15kg
  • X-Axis Travel Length: 500mm
  • Y-Axis Travel Length: 1000mm
  • Max. Linear Speed: 1m/s
  • Stage Type: Motorized
  • Driver Included?: Yes
V-731 Integrated High Speed Precision XY Stage
V-731 Integrated High Speed Precision XY Stage
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Category: Optomechanics & Positioning / Stages
  • Type: Nanopositioning Stage
  • Max. Load: 5kg
  • Mass: 19.4kg
  • Height: 60mm
  • X-Axis Travel Length: 205mm
  • Y-Axis Travel Length: 205mm
  • Max. Linear Speed: 200mm/s
V-610 High Precision Rotation Stage
V-610 High Precision Rotation Stage
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Category: Optomechanics & Positioning / Stages
  • Type: Rotation Stage
  • Max. Load: 2kg
  • Mass: 630g
  • Height: 28mm
  • Max. Rotation Speed (degrees/s): 540
  • Stage Type: Motorized
  • Driver Included?: Yes
LS-50
LS-50
Applied Scientific Instrumentation Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 4.5kg
  • Mass: 1.4kg
  • Height: 35.5mm
  • X-Axis Travel Length: 50mm
  • Max. Linear Speed: 1.6mm/s
  • Stage Type: Motorized
  • Accuracy: 0.25 μm per mm
  • Length: 152.5 mm
  • Resolution: < 0.1 μm
NanoCube P-616
NanoCube P-616
PI (Physik Instrumente) LP, Motion Control, Air Bearings, Piezo Mechanics
  • Category: Optomechanics & Positioning / Stages
  • Type: Nanopositioning Stage
  • Max. Load: 100g
  • Mass: 0.08kg
  • Height: 4cm
  • X-Axis Travel Length: 0.1mm
  • Y-Axis Travel Length: 0.1mm
  • Z-Axis Travel Length: 0.1mm
  • Linearity Error (entire travel range): 0.1%
  • Min. Incremental Motion: 0.2 nm
  • Sensor Type: acitive sensor
HT1111LC ProScan Stage
HT1111LC ProScan Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 100kg
  • X-Axis Travel Length: 108mm
  • Y-Axis Travel Length: 108mm
  • Stage Type: Motorized
  • Drive Screws: Zero backlash, recirc. ball screws; 2 mm pitch
  • Minimum Step Size: 0.4 µm
  • Stepper Motor: 4 phase, 1 amp/phase, microstepping
H117 ProScan Stage
H117 ProScan Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 10kg
  • X-Axis Travel Length: 114mm
  • Y-Axis Travel Length: 75mm
  • Max. Linear Speed: 100mm/s
  • Stage Type: Motorized
  • Max. Resolution: up to 10 nm
  • Repeatability: ±0.7 µm
H101F Flat Top Stage
H101F Flat Top Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 10kg
  • Height: 42mm
  • X-Axis Travel Length: 114mm
  • Y-Axis Travel Length: 75mm
  • Max. Linear Speed: 40mm/s
  • Stage Type: Motorized
  • Minimum Step Size (resolution): 0.02 µm
H101A ProScan™ Stage
H101A ProScan™ Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 10kg
  • Height: 68cm
  • X-Axis Travel Length: 114mm
  • Y-Axis Travel Length: 75mm
  • Stage Type: Motorized
  • Driver Included?: Yes
  • Minimum Step Size: 0.01 µm
  • XY Repeatability: 0.7 µm
ES107 OptiScan Stage
ES107 OptiScan Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • X-Axis Travel Length: 114mm
  • Y-Axis Travel Length: 75mm
  • Stage Type: Motorized
  • Driver Included?: Yes
  • Drive Mechanism: Anti-backlash precision lead screw
  • Linear Slides: 3 mm ball bearings
  • Repeatability: ±5 µm
H107 ProScan Stage
H107 ProScan Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 10kg
  • Height: 63mm
  • X-Axis Travel Length: 112mm
  • Y-Axis Travel Length: 70mm
  • Stage Type: Motorized
  • Linear Slides: 3 mm precision bearings
  • Minimum Step Size: 0.04 µm
  • Stepper Motor: 4 phase, 1 amp per phase micro stepping
NanoScanZ Nanopositioning Piezo Z Stages
NanoScanZ Nanopositioning Piezo Z Stages
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Nanopositioning Stage
  • Max. Load: 500g
  • Height: 21mm
  • Stage Type: Motorized
  • Accuracy and Linearity: 0.5% of travel
  • Operating Temperature: 5-50 °C
  • Repeatability: 5 nm
HLD117 Linear Motor Stage
HLD117 Linear Motor Stage
Prior Scientific Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 6kg
  • Mass: 7kg
  • Height: 45mm
  • X-Axis Travel Length: 120mm
  • Y-Axis Travel Length: 80mm
  • Max. Linear Speed: 300mm/s
  • Metric Accuracy (per mm of travel): 0.045 µm
  • Min. Step Size (resolution): 0.05 µm
  • XY Repeatability: 0.15 µm
PRO190LM Series
PRO190LM Series
Aerotech Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 60kg
  • Mass: 36.4kg
  • Height: 85mm
  • X-Axis Travel Length: 1000mm
  • Max. Linear Speed: 2m/s
  • Stage Type: Motorized
  • Accuracy: ±1.5 μm
  • Resolution: 5 nm
OE-1250 GEN II MS-Stage
OE-1250 GEN II MS-Stage
Applied Scientific Instrumentation Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • X-Axis Travel Length: 125mm
  • Y-Axis Travel Length: 125mm
  • Max. Linear Speed: 14mm/s
  • Stage Type: Motorized
  • Driver Included?: Yes
  • XY Axis Maximum Velocity: 7 mm /sec
  • XY Axis Resolution: 0.022 μm
  • XY Axis RMS Repeatability: < 0.7 μm
LS-200
LS-200
Applied Scientific Instrumentation Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 4.5kg
  • Mass: 2.4kg
  • Height: 35.5mm
  • X-Axis Travel Length: 200mm
  • Max. Linear Speed: 7mm/s
  • Stage Type: Motorized
  • Accuracy: 0.25 μm per mm
  • Length: 305 mm (12")
  • Resolution: < 0.1 μm
LS-100
LS-100
Applied Scientific Instrumentation Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 4.5kg
  • Mass: 1.9kg
  • Height: 35.5mm
  • X-Axis Travel Length: 100mm
  • Max. Linear Speed: 1.6mm/s
  • Stage Type: Motorized
  • Accuracy: 0.25 μm per mm
  • Length: 203.5 mm (8")
  • Resolution: < 0.1 μm
XSlide™ Assemblies
XSlide™ Assemblies
Velmex Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 15.9kg
  • Height: 3.5cm
  • X-Axis Travel Length: 76.2cm
  • Y-Axis Travel Length: 76.2cm
  • Stage Type: Manual,Motorized
  • Driver Included?: No
BiSlide® Linear Assemblies
BiSlide® Linear Assemblies
Velmex Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 136.1kg
  • Height: 6.2cm
  • X-Axis Travel Length: 203.2cm
  • Y-Axis Travel Length: 203.2cm
  • Stage Type: Manual,Motorized
  • Driver Included?: No
  • Load Capacity (horizontally): 300 lbs
  • Travel Lengths: up to 80"
GM-1015 Digital Encoder Galvano Scanner
GM-1015 Digital Encoder Galvano Scanner
Canon U.S.A. Inc., Industrial Products Div.
  • Category: Optomechanics & Positioning / Galvanometers
  • Type: 2 Axis
  • Max. Beam Diameter: 15mm
  • Max. Scan Angle X (degrees): 20
  • Max. Scan Angle Y (degrees): 20
  • Small Step Response (µs): 390
  • Repeatablility (µrad): 3
  • Overall Height (no mirror): 88mm
HXP100P-MECA
HXP100P-MECA
MKS/Newport
  • Category: Optomechanics & Positioning / Hexapods
  • Type: Hexapod
  • Max. Load: 6kg
  • Mass: 5.6kg
  • Height: 20.9cm
  • X-Axis Range: 5.5cm
  • Y-Axis Range: 5cm
  • Z-Axis Range: 2.8cm
  • Min. Incremental X Motion: 0.10 µm
  • Min. Incremental Y Motion: 0.10 µm
  • Min. Incremental Z Motion: 0.05 µm
HXP200S
HXP200S
MKS/Newport
  • Category: Optomechanics & Positioning / Hexapods
  • Type: Hexapod
  • Max. Load: 85kg
  • Mass: 24.9kg
  • Height: 30cm
  • X-Axis Range: 80cm
  • Y-Axis Range: 90cm
  • Z-Axis Range: 5.4cm
  • Min. Incremental X Motion: 0.15 µm
  • Min. Incremental Y Motion: 0.15 µm
  • Min. Incremental Z Motion: 0.15 µm
HXP1000-MECA
HXP1000-MECA
MKS/Newport
  • Category: Optomechanics & Positioning / Hexapods
  • Type: Hexapod
  • Max. Load: 450kg
  • Mass: 25kg
  • Height: 395mm
  • X-Axis Range: 155mm
  • Y-Axis Range: 138mm
  • Z-Axis Range: 79mm
  • Min. Incremental X Motion: 0.30 µm
  • Min. Incremental Y Motion: 0.30 µm
  • Min. Incremental Z Motion: 0.16 µm
Rotary Motion Systems
Rotary Motion Systems
ALIO Industries LLC
  • Category: Optomechanics & Positioning / Stages
  • Type: Rotation Stage
  • Max. Load: 40kg
  • Max. Rotation Speed (degrees/s): 5500
  • Stage Type: Motorized
Hybrid Hexapods
Hybrid Hexapods
ALIO Industries LLC
  • Category: Optomechanics & Positioning / Hexapods
  • Type: Hexapod
  • Max. Load: 20kg
  • X-Axis Range: 450cm
  • Y-Axis Range: 450cm
  • Z-Axis Range: 60cm
  • Max. Linear Speed: 0.5m/s
  • Max. Rotation Speed (degrees/s): 180
Z-Lift & Vertical Motion Stages
Z-Lift & Vertical Motion Stages
ALIO Industries LLC
  • Category: Optomechanics & Positioning / Stages
  • Type: Nanopositioning Stage
  • Max. Load: 50kg
  • Z-Axis Travel Length: 200cm
  • Stage Type: Motorized
Linear Motion Systems
Linear Motion Systems
ALIO Industries LLC
  • Category: Optomechanics & Positioning / Stages
  • Type: Nanopositioning Stage
  • Max. Load: 80kg
  • X-Axis Travel Length: 450mm
  • Y-Axis Travel Length: 450mm
  • Max. Linear Speed: 1m/s
  • Stage Type: Motorized
Granite Gantry Ultra-Precision XYZ Positioning System
Granite Gantry Ultra-Precision XYZ Positioning System
Opton Laser International SA
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 30kg
  • X-Axis Travel Length: 1000mm
  • Y-Axis Travel Length: 1300mm
  • Max. Linear Speed: 1000mm/s
  • Stage Type: Motorized
  • Driver Included?: No
  • Acceleration: ≤15.000 mm/s2
  • Bi-direct. Repeatability: ±0.5 µm or better
  • Calibrated Abs. Accuracy: ±1.5 µm or better
GM-1005 Digital Encoder Galvano Scanner
GM-1005 Digital Encoder Galvano Scanner
Canon U.S.A. Inc., Industrial Products Div.
  • Category: Optomechanics & Positioning / Galvanometers
  • Type: 2 Axis
  • Max. Beam Diameter: 5mm
  • Max. Scan Angle X (degrees): 30
  • Max. Scan Angle Y (degrees): 30
  • Small Step Response (µs): 200
  • Repeatablility (µrad): 5
  • Overall Height (no mirror): 58mm
M3-LS-U2
M3-LS-U2
New Scale Technologies Inc.
  • Category: Optomechanics & Positioning / Stages
  • Type: Linear Stage
  • Max. Load: 40g
  • Mass: 15g
  • Height: 10mm
  • X-Axis Travel Length: 8mm
  • Y-Axis Travel Length: 8mm
  • Max. Linear Speed: 35mm/s
  • Bi-directional repeatability: ± 5 µm
  • Control interface - direct: I2C or SPI
  • Control interface - other: USB adapter to PC

Optomechanics & Positioning Products

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.