Photonics Dictionary

The use of thin flexible glass or plastic fibers as wave guides — or "light pipes" — to channel light from one location to another. Fiber optics is based off of the principle of total...

A fiber-coupled LED (light-emitting diode) refers to an LED device that is optically coupled to an optical fiber for the purpose of efficient light transmission. In this configuration, the LED serves...

One of the two major types of optical glass, the other being crown glass. Flint glass is softer than crown glass, has a higher dispersion and usually a higher refractive index.

Optical glass that possesses a refractive index equal to or less than 1.5, and an Abbe number that ranges from 62 to about 85.

Fluoride fibers are optical fibers made from fluoride-based materials, typically fluoride glasses or crystalline fluoride compounds. These fibers are characterized by their unique optical properties,...

Optical glass containing zirconium fluoride that results in special characteristics such as improved transmission.

The process whereby a rotating wheel carries grains of an abrasive, suspended in a vehicle, across the surface of the optical glass to be ground. The workpieces are forced downward by pneumatic...

A Fresnel lens is a type of optical lens that consists of a series of concentric grooves or steps carved into a flat, thin piece of transparent material, typically plastic or glass. This design...

Fresnel reflection refers to the reflection of light at the interface between two different media with different refractive indices. This phenomenon was named after the French engineer and physicist...

Reflection losses incurred at input and output of optical elements because of the difference in refractive index between glass and the immersion medium.

Fused quartz and silica are closely related materials, both composed primarily of silicon dioxide (SiO2), but they are produced through different manufacturing processes and have distinct properties...

Glass consisting of almost pure silicon dioxide (SiO2). Also called vitreous silica. Frequently used in optical fibers and windows.

A type of glass used in near-infrared optical components, in which germanium is used as a cation instead of silicon.

An optically pumped solid-state laser in which the active medium is a neodymium ion in a glass rod host. Abbreviated Nd:glass.

A furnace used to heat glass materials. It may be a small laboratory-type furnace for small-scale experiments or large enough to hold gas-fired tanks for the commercial mass production of glass....

A porous ceramic substance that is ground to a given optical form and on which a polished plate of glass is sagged by heat application. It is capable of transmitting in a partial vacuum. The glass...

A GRIN (gradient index) lens is a type of optical lens that utilizes a gradient in refractive index across its volume rather than having a uniform refractive index like conventional lenses. This...

A helium-neon (HeNe) laser is a type of gas laser that emits visible red light at a wavelength of 632.8 nm. It operates based on the principle of stimulated emission of photons from excited helium...

A holographic camera, also known as a holographic imaging system or holographic recorder, is a specialized device used to capture 3D holographic images of objects or scenes. Unlike conventional...

An electro-optic system using, in general form, an evacuated glass envelope with a semitransparent photocathode at one end and a luminescent screen at the other for the amplification of an optical...

A bundle of filaments of optical glass or other transparent materials that transmit only light, not optical images. The arrangement of the individual fibers in the bundle is not sufficiently regular...

An infrared lens is an optical component specifically designed and optimized for transmitting, focusing, or manipulating infrared (IR) radiation within the infrared spectrum. These lenses are used in...

Infrared optics refer to optical components and systems designed to manipulate and control infrared (IR) light, which lies beyond the visible spectrum. These components are crucial for various...

The range of materials that, unlike glass, may be used in the infrared. Water-soluble salts, such as cesium iodide, and other substances such as arsenic sulfide, selenium, thallium bromide-iodide and...

A method that produces low-loss optical fibers. A glass tube rotates while reactants pass through the tube and heat is externally applied by a burner that traverses the tube. The oxidizable vapors in...

A lab-on-a-chip (LOC) is a miniaturized device that integrates various laboratory functions and capabilities onto a single, compact chip. Also known as microfluidic devices, lab-on-a-chip systems are...

A lens blank is a piece of optical material in a raw, unfinished state, typically in the form of a disk or block, from which lenses are eventually fabricated. Lens blanks are made from various...

Lens testing equipment refers to a range of specialized tools and instruments used to evaluate the optical performance, quality, and characteristics of lenses. These instruments are essential for...

A lens is a transparent optical device that focuses or diverges light, allowing it to pass through and form an image. Lenses are commonly used in optical systems, such as cameras, telescopes,...

An ophthalmic instrument used to measure the magnitude and direction of the maximum and minimum powers of a spectacle lens, and mark the optical center of the lens by an ink dot. When the lens to be...

A long-pass filter is an optical filter that allows longer wavelengths of light to pass through while blocking or attenuating shorter wavelengths. These filters are designed to transmit light with a...

Term used to describe an optical surface that contacts the test glass only at its edges.

Optical components exceeding 24 in. in diameter. The components are usually glass, acrylic or polystyrene and are used for virtual image systems in simulators and collimators.

An electric arc that is formed in mercury vapor through which an electric current flows. The intensity of the illumination of the arc depends mostly on its design and the conditions under which it...

A metalens, short for "metasurface lens," is a type of optical lens that uses nanostructured materials to manipulate light at a subwavelength scale. Unlike traditional lenses made of glass or other...

An automatic surface-generating process involving the removal of a material from a given surface. Optical milling typically involves the abrasion of glass by a diamond-charged wheel.

A mirror blank refers to the initial piece of material from which a mirror is made. It is typically a flat or slightly curved piece of glass or other substrate that serves as the starting point for...

Modified chemical vapor deposition (MCVD) is a technique used in the fabrication of optical fibers. It is a specialized form of chemical vapor deposition (CVD) that is employed to produce...

A molded lens is an optical lens manufactured using a molding process, typically involving the shaping of a material, such as glass or plastic, into the desired lens shape. This process involves...

A form of shearing interferometer that contains a simple wedged (plane-parallel) glass plate with a nonzero optical path difference to create interference between split optical wavefronts. The...

A unique glass made up of nano-structured materials to create millimeter sized monolithic glass space-variant polarization converters which ultimately alter the way light propagates through and is...

A support for optical parts comprising a solid bed that permits precise longitudinal movement of one component relative to the others, and a number of sliders equipped with holders for lenses, lamps,...

A light absorbing material applied to ground optical surfaces during the process of making that surface non reflective. Such material should have a refractive index as high as that of the underlying...