Photonics Dictionary

3D scanners are devices used to capture the three-dimensional shape and characteristics of physical objects or environments. They utilize various technologies to gather data about the geometry,...

An accelerometer is a sensor or transducer that measures the rate of change of velocity of an object, or in simpler terms, it measures acceleration. Accelerometers are widely used in various...

Component that is externally controlled via electronic or photon signal.

imaging system which clearly shows the IR signals in the field of view as well as ambient environment

A glow discharge lamp consisting of a cold cathode and a mixture of inert gases. The intensity of illumination varies with the applied signal voltage. This lamp was commonly used as a source of...

A device that enlarges and strengthens a signal's output without significantly distorting its original waveshape. There are amplifiers for acoustical, optical and electronic signals.

In digital data transmission, the representation of a bit by change in amplitude of the outgoing signal. Amplitude shift keying (ASK) is less sensitive than phase-shift keying, but can tolerate...

Information presented as a continuously variable relationship between a signal and a standard.

A signal in the form of continuously variable voltage or current.

A device that converts an analog signal, that is, a signal in the form of a continuously variable voltage or current, to a digital signal in the form of bits.

An APD detector, or avalanche photodiode detector, is a type of photodetector used to detect light or optical signals by converting incoming photons into electrical current. It operates based on the...

A loss of resolution or detail in a television signal caused by the size of the electron scanning beam.

An atomic absorption spectrometer (AAS) is an analytical instrument used to determine the concentration of specific chemical elements in a sample by measuring the absorption of light at...

Attenuation refers to the gradual loss or reduction of intensity, force, or magnitude of a particular property as it propagates through a medium or travels over a distance. This concept is prevalent...

In fiber optics, the limitation on performance imposed by the amplitude of a received signal rather than distortion.

An attenuator is an electronic or optical device used to reduce the power or intensity of a signal without significantly affecting its waveform or other characteristics. Attenuators are commonly used...

Concerned with the transmission and reception of both sight and sound. An audiovisual system communicates pictorial images and audio signals.

A device for automatic exposure control in which a motor-driven diaphragm adjusts the aperture in response to a signal from a photocell detecting ambient light.

A signal-averaging device that improves signal-to-noise ratio by comparing a sampled signal with a time-delayed form of itself.

Autofluorescence refers to the natural emission of fluorescence exhibited by certain biological structures or molecules when exposed to light. Unlike fluorescence that results from the application of...

A method of producing an essentially constant output signal from an electronic circuit despite variations in the strength of the input signal.

A device that utilizes avalanche multiplication of photocurrent by means of hole-electrons created by absorbed photons. When the device's reverse-bias voltage nears breakdown level, the hole-electron...

Backscatter refers to the phenomenon in which radiation or waves are scattered backward, opposite to the direction of the incident beam. This occurs when the incident radiation encounters a target or...

A ball lens is a small, spherical optical component typically made of glass or other transparent materials. It is characterized by its spherical shape, with both its front and back surfaces forming...

In fiber optics, the limitation on performance imposed by the system bandwidth rather than the amplitude of the signal.

The simplest method of transmission on a local area network. The entire bandwidth of the cable is used to transmit a single unmodulated digital signal. Baseband transmission is capable of...

A unit of speed of transmission or receipt of a signal, roughly equal to bits per second; common baud rates are 300, 1200, 2400, 4800 and 9600.

A device, either visual or electronic, that emits signals to identify set positions for use in the navigation of aircraft and ships along flight paths and channels, or as a warning against entering a...

The signal formed when two signals, such as light waves, of different frequencies are present simultaneously in a nonlinear device. The frequency of the beat is equal to the difference in frequency...

Degradation factor in coherent light systems where the amplitude of the recorded signal is decreased as the number of object points is increased, resulting in poor noise performance.

Signal used in optical transmission systems to generate currents in a detector that are decoded with reference to a specified threshold.

Bioluminescence is a natural phenomenon in which living organisms produce and emit light through a chemical reaction occurring within their bodies. This light emission is typically the result of a...

The level of the television picture signal that corresponds to the maximum limit of black peaks.

A ground-based navigation beacon that emits pulsed signals which are picked up by aircraft making an instrument (blind) approach in landing. The signal is transmitted to the aircraft's L-scan...

An instrument for detecting and analyzing repetitive signals. Using a fixed time delay or "gate," the input signal is sampled numerous times and averaged to increase the ratio of the...

Brillouin scattering is a phenomenon in physics where an incident electromagnetic wave (usually light) interacts with acoustic phonons (quantized lattice vibrations) in a material, resulting in the...

A broadband filter is an electronic or electromagnetic device designed to pass a range of frequencies or signals within a specified bandwidth while attenuating or rejecting signals outside of that...

A calcium indicator is a molecule that is sensitive to changes in calcium ion (Ca2+) concentrations in biological systems. These indicators are commonly used in various fields, including cell...

Camera Link HS (high speed) is a standard developed for high-speed digital data transmission in machine vision and industrial imaging applications. It is an evolution of the original Camera Link...

The electron beam tube of a television camera that converts an optical image into a pattern of electrostatic charges and then scans the pattern to produce a corresponding electronic signal for...

The storage surface of an electron beam tube that is scanned by an electron beam to generate an output-signal current corresponding to the charge-density pattern stored.

A light-tight box that receives light from an object or scene and focuses it to form an image on a light-sensitive material or a detector. The camera generally contains a lens of variable aperture...

An analog signal capable of being modulated as to frequency, amplitude or phase to carry information.

Carrier injection refers to the process of introducing charge carriers (either electrons or holes) into a semiconductor material. Semiconductors are materials with electrical conductivity between...

The ratio of the power of the carrier wave to that of unwanted signal distortions, or noise, before any nonlinear signal processing such as detection or amplitude limiting.