Photonics Dictionary

See gimbal mount; kinematic mount; lens mount.

An adhesive used to hold optical components in their mounts. It may be a thermoplastic or chemical-hardening substance.

A standard lens interface initially made for 16mm movie cameras and now used primarily on closed-circuit television cameras. It is a 1-in.-diameter, 32-thread-per-inch interface with a...

A lens mounting with eccentric rings that may be rotated to shift the axis of the lens to a prescribed position.

A telescope stand equipped with a polar axis that can be set parallel to the Earth's axis of rotation and a declination axis that is at right angles to the polar axis. If the telescope is turned at a...

An optical mounting device that permits adjustment around two perpendicular and intersecting axes of rotation.

A mount that uses a floating suspension and a motor-driven gyroscope to keep a motion picture or still camera at a set angle even though the camera is mounted in a place that subjects it to heavy...

A compact optical projection system, mounted on or built into a helmet, and used to project data or a scene directly into the eyes of the wearer. Also called visually coupled display.

A process by which a plastic cell is molded around a glass lens or lenses to create a mount, eliminating the metal barrel and the need for glass-to-metal seals.

A mount for an optic element or optics assembly, designed so that all six degrees of freedom are singly constrained. This assures that movement will be prevented, while stress will not be introduced...

The metal tube that maintains the optical components of a lens in proper relationship. Some lenses are mounted in metal cells, which in turn are screwed to the front and rear of a shutter or lens...

A mirror mount is a mechanical device used to secure and precisely position mirrors in optical systems. Mirrors are essential components in optical setups for reflecting light or redirecting laser...

A mounting used for large concave gratings, whereby the slit, grating and plate holder lie in the Rowland circle, and the photographic plates lie along a large portion of the circle. In this way, a...

The mounting of a concave diffraction grating and a plate holder at the ends of a rigid bar. The ends follow separate straight tracks that intersect perpendicular to each other. The slit is located...

A surface-mount device (SMD) is an electronic component that is mounted directly onto the surface of a printed circuit board (PCB) rather than being inserted into holes drilled in the board (as with...

The base used to hold an astronomical telescope. It may be either altazimuth, with horizontal and vertical axes of rotation, or equatorial, with one axis parallel to the Earth's axis of rotation and...

A system used for gratings that consists of a concave mirror, a grating and a plate holder mounted normal to the grating to reduce astigmatism and spherical aberration. The mounting yields a...

A dispersion relation defined in order to value the reciprocal amount of dispersion. It is defined as the refractivity over the difference in index values of the shortest and longest visible...

A measuring device that uses a light-sensitive cell or detector to determine the amount of light transmitted by a substance.

Mount attached to a camera or camcorder which allows the user to attach a microphone or flash unit.

Photographing of terrain on the ground and objects in the air by cameras mounted in aircraft; utilized in satellites, multispectral scanning and intricate data handling systems.

A support device in which a column or chamber of air permits the free travel of a mobile part. In optical mounting and positioning equipment, air bearings are of two types, linear or rotary,...

A quantitative measure of the amount of radiation given off by an instrument, expressed in roentgens per unit of free air.

An old name for the rotating arm moving about an axis of rotation over a divided circle used to measure angles. Now the term refers to a small stadia telescope mounted over a ruler for use in...

A type of telescope mount that permits direct azimuth and elevation adjustments.

An antireflection coating (AR coating) is a thin film or coating applied to optical surfaces, such as lenses or windows, to minimize unwanted reflections and increase the transmission of light...

An APD detector, or avalanche photodiode detector, is a type of photodetector used to detect light or optical signals by converting incoming photons into electrical current. It operates based on the...

An arc flash is a sudden release of electrical energy due to an electric arc — a continuous, high-current discharge of electricity between conductors or from a conductor to ground. Arc flashes...

An atomic absorption spectrometer (AAS) is an analytical instrument used to determine the concentration of specific chemical elements in a sample by measuring the absorption of light at...

The ability of a camera to compensate in cases where a subject with a large amount of background light would otherwise be obscured by blooming or silhouetting.

The smallest amount of photon energy to pass a detector window and be counted.

A coupling mechanism designed to quickly lock a connector into an adaptor or a lens into a lens mount. Typically coupling is accomplished by less than a quarter turn of the component being mounted.

A device that measures the spatial distribution of energy perpendicular to the propagation path of a radiant beam. An energy or power meter is typically used to monitor the amount of light passing...

A set of mirrors mounted on solenoids to move them into and out of the path of a laser beam, making it possible for multiple workstations to alternate using the single laser source.

A device used to compare the luminous intensities of two sources by locating a point between the two light sources where the produced flux densities are equal. The luminous intensities of the two...

An instrument used to support optical parts to be cemented, or to be mounted in plaster.

A thermometric instrument used for the detection and measurement of radiant energy. Its essential component is a short narrow strip covered with a dead black absorbing coating and mounted at the...

The law expressing the condition under which a crystal will reflect a beam of x-rays with the greatest amount of distinction or resolution and, at the same time, denoting the angle at which the...

The law stating that the amount of chemical change produced is proportional to the amount of light absorbed. Actually, the change is also dependent on the intensity of light -- a fact named the...

A type of comparator with a telescope equipped with a cross wire mounted on a vertical sliding column. It is used to measure vertical distances on fairly near objects.

Light produced when a metal is bombarded with high-velocity electrons causing small amounts of the metal to vaporize and emit radiation. Also known as electronoluminescence.

A CCD camera, or charge-coupled device camera, is a type of digital camera that utilizes a CCD image sensor to capture and record images. CCD cameras are widely used in various applications,...

In an interferogram, an intense portion of the recording that corresponds in size to the amount of infrared radiation incident on the detector.

1. Mounting a lens or mirror so that its optical axis is coincident with the optical or mechanical axes of other portions of the system. 2. The machining (edging) of the outside diameter of a lens...

In a reflecting telescope, the obstruction of the primary mirror by a secondary mirror which blocks a small amount of the light reflected by the primary mirror and introduces additional diffraction.

A charge-coupled device (CCD) is a type of electronic image sensor used in various imaging devices, including digital cameras, camcorders, and scientific instruments. It consists of an integrated...