Photonics Dictionary

Broadband dielectric mirrors, also known as broadband mirrors, are optical coatings designed to efficiently reflect or transmit light over a broad range of wavelengths. These mirrors are constructed...

The low-refractive-index material that surrounds the core of an optical fiber to contain core light while protecting against surface contaminant scattering. In all-glass fibers, the cladding is...

Optical elements that have been coated with one or more layers of dielectric, or metallic material. These coatings serve to reduce or increase reflection from the surface, and to protect the surfaces...

A corner cube, also known as a corner reflector or retroreflector prism, is a type of optical device used to reflect light or electromagnetic waves back towards their source with minimal deviation in...

A dichroic mirror, also known as a dichroic beamsplitter or interference filter beamsplitter, is an optical device that selectively reflects or transmits light based on its wavelength. Dichroic...

A system for fabricating optical fiber, consisting of a furnace that heats the materials, a polymer coating stage, a capstan-pulling apparatus that free-draws the preform into a fiber and a drum on...

Etaloning is an optical phenomenon that occurs in imaging systems, particularly in devices such as spectrometers, interferometers, and cameras. It is characterized by the appearance of interference...

Coating carried out in a sealed chamber evacuated by a mechanical pump in series with an oil diffusion pump to a pressure less than 10-4 mm of mercury, measured by a vacuum gauge. At such a low...

Fresnel reflection refers to the reflection of light at the interface between two different media with different refractive indices. This phenomenon was named after the French engineer and physicist...

Graphene is a two-dimensional allotrope of carbon consisting of a single layer of carbon atoms arranged in a hexagonal lattice pattern. It is the basic building block of other carbon-based materials...

An infrared lens is an optical component specifically designed and optimized for transmitting, focusing, or manipulating infrared (IR) radiation within the infrared spectrum. These lenses are used in...

An optical component coated to reflect infrared radiation. Gold, silver and aluminum are typical coating materials.

Ion-beam sputtering (IBS) is a physical vapor deposition (PVD) technique used for depositing thin films onto substrates. It involves bombarding a target material with a beam of energetic ions,...

A laser cavity, also known as an optical cavity or resonator, is a fundamental component of a laser system. It is a confined region or space where light undergoes multiple reflections, leading to the...

The laser damage threshold refers to the maximum level of laser intensity that a material can withstand without experiencing damage. It is a critical parameter in laser applications and is...

Laser optics refers to a broad category of optical components and systems designed for manipulating and controlling laser light. Laser optics play a crucial role in shaping the characteristics of...

A lens blank is a piece of optical material in a raw, unfinished state, typically in the form of a disk or block, from which lenses are eventually fabricated. Lens blanks are made from various...

A long-pass filter is an optical filter that allows longer wavelengths of light to pass through while blocking or attenuating shorter wavelengths. These filters are designed to transmit light with a...

The fundamental tool of microdensitometry, the microdensitometer is an instrument used for the precise measurement of microscopic optical densities (i.e. optical absorption) by detection of faint...

One or more thin-film layers of optical material deposited on a mirror blank/substrate in order to enhance the way that substrate reflects light. For example of optical materials/optical coatings...

Modified chemical vapor deposition (MCVD) is a technique used in the fabrication of optical fibers. It is a specialized form of chemical vapor deposition (CVD) that is employed to produce...

Transparent glassy and or crystalline structured materials engineered from inorganic, non-metallic materials via various methods that include heat or specific chemical reactions. Optical ceramics...

Optical coatings are thin layers of materials applied to optical components, such as lenses, mirrors, filters, and prisms, to modify their reflective and transmissive properties. These coatings are...

An optical filter is a device that selectively transmits or blocks specific wavelengths, or colors, of light. Optical filters are used to control the spectral content of light in various...

Optical manufacturing tools and machinery encompass a wide range of equipment, instruments, and systems used in the fabrication, shaping, finishing, and testing of optical components and systems....

Optical materials refer to substances or compounds specifically chosen for their optical properties and used in the fabrication of optical components and systems. These materials are characterized by...

An optical testing instrument is a device or system used to evaluate and measure the performance, quality, and characteristics of optical components, systems, and devices. These instruments play a...

A saturated compound of carbon and hydrogen used as a liquid coating material for optical components in high-power laser applications. See liquid coating.

Photoelastic equipment and supplies refer to instruments and materials used in photoelasticity, a technique used to analyze stress distribution and behavior in materials. photoelastic equipment...

Plasmon ion-assisted deposition (PIAD) is a technique used in thin-film deposition processes, particularly in the production of optical coatings. This method combines two key processes: plasmon...

Reactive evaporation refers to a process in thin-film deposition where a material is deposited onto a substrate through evaporation, and chemical reactions take place during or after the evaporation...

A gelatinous fluid that can be used as a porous thin-film coating for optical components, including laser beam collimators, or as a protective coating for glass and crystalline materials.

A sputtering target is a solid material used in the process of physical vapor deposition (PVD), specifically sputtering. Sputtering targets are typically made of metals, metal alloys, or compounds...

Structural color refers to coloration in materials that is not caused by pigments or dyes but is instead a result of the physical structure of the material. In structural color, the interaction of...

A telescope lens is a primary optical component of a telescope system that gathers and focuses light to form an image. It is typically a curved, transparent piece of glass or other optical material...

Thin-film coatings are layers of material applied to the surface of an object or substrate, typically to modify its optical, electrical, or mechanical properties. These coatings are composed of thin...

Ultraviolet (UV) fiber optics refers to optical fibers that are designed and optimized for the transmission of ultraviolet light, which is electromagnetic radiation with wavelengths shorter than...