Photonics Dictionary: I

See digitizer; frame grabber.

The science of producing, recording, storing, transmitting and displaying visual images by any system (photographic, video, facsimile, etc.) in any form.

A set of international standards by which a single telecommunications channel is used to transmit voice and data simultaneously.

An infrared camera, also known as a thermal imaging camera or IR camera, is a device that captures and visualizes the infrared radiation emitted by objects, revealing temperature variations across...

Often referred to as the geometric center of a given image or image plane, the centroid of an image is a fixed point located at the intersection of all of the hyperplanes of symmetry within that...

A method used in imaging to detect subtle differences between two apparently similar pictures. It can be achieved by superimposing the negative of one photograph over a contact print of another, by...

An electron tube that employs electromagnetic radiation to produce a visual replica of an image produced on its cathode. Electrons ejected from the cathode by the incident radiation are accelerated...

A camera that uses an image converter tube in such a way that voltage waveforms applied to internal electrodes cause the original image to be switched on and off very rapidly, thus offering time...

A machine vision technique that compares a template of the desired image (the correlation kernel) with the actual camera image of an object and generates a new image (the correlation image) that...

The digitization process by which an image is manipulated to increase the amount of information perceivable by the human eye.

An image intensifier, also known as an image intensification tube or image intensification device, is a specialized electronic device used to amplify low-light-level images to make them visible to...

In optics, the term image jump refers to a displacement or shift in the apparent position of an image when a change occurs in the optical system. This phenomenon is often observed in certain types of...

Any form of lens, optical system (camera, telescope, microscope, etc.), or opto-electronics utilized for the purpose of producing an image of a given object.

Photon flow created by imaging of light into a detector array; IPD is the electrical signal used by the image processor in a laser radar angular tracking system.

A hologram in which the image of an object, or the object itself, is located near the hologram recording plane, for optimum image reconstruction. Because the images are close to the hologram plane,...

A device embodying a microprocessor that converts an image to digital form and then further enhances the image to prepare it for computer or visual analysis.

A measure of the closeness with which an optical image is capable of resembling the original object. The factors that affect image quality are lens aberrations, diffraction, dirt and stray light...

Filtering procedures aimed at estimating the original image by removing the blurring and noise suppression that occur during image processing.

Immunohistochemistry (IHC) is a method for detecting antigens or haptens in cells of a tissue section by using labeled antibodies to bind specifically to their antigens. IHC is used for disease...

In the context of optical materials, the term "impurity level" refers to the presence of foreign atoms or molecules within the material that deviate from its regular or intrinsic composition. These...

In its natural or original position.

In vitro is a Latin term that translates to "in glass." In scientific contexts, particularly in biology and medicine, it refers to experiments or procedures conducted outside of a living organism,...

In vivo is a Latin term that translates to "within the living." In scientific contexts, particularly in biology and medicine, it refers to experiments or observations conducted within a living...

The ratio of the velocity of light in a vacuum to the velocity of light in a refractive material for a given wavelength.

An InGaAs (indium gallium arsenide) camera is a type of imaging device that utilizes InGaAs sensors to capture images in the near-infrared (NIR) spectrum. InGaAs is a semiconductor material that is...

Indium phosphide (InP) is a compound semiconductor material composed of indium (In) and phosphorus (P). It belongs to the III-V group of semiconductors, where elements from groups III and V of the...

Induced pluripotent stem (iPS) cells are ordinary cells that are genetically reprogrammed to an embryonic stem cell-like state to allow the human cells to be used for therapeutic purposes....

Inertial confinement fusion (ICF) is a method of achieving nuclear fusion, a process where two atomic nuclei combine to release energy. In the case of inertial confinement fusion, the fusion reaction...

Inertial fusion energy (IFE) refers to a proposed method of generating electricity by harnessing the energy released from the fusion of light atomic nuclei, typically isotopes of hydrogen, through a...

A thermal infrared imaging procedure developed for quality control of printed circuit boards. The thermogram of each board under test is compared with a standard thermal profile and then with a...

An infrared detector is a device that is used to detect and measure infrared radiation, which lies beyond the visible spectrum of light. These detectors are utilized in various applications,...

The tracking of a target by its infrared emittance. See heatseeker.

A countermeasure used against heat seeking missiles to reduce their effectiveness. Normally it involves the emittance of infrared radiation at a level that will overload the missiles' detectors.

An infrared lens is an optical component specifically designed and optimized for transmitting, focusing, or manipulating infrared (IR) radiation within the infrared spectrum. These lenses are used in...

An infrared light source is a device that emits light in the infrared spectrum, which lies beyond the visible spectrum of light. Infrared light has longer wavelengths than visible light and is...

An infrared light-emitting diode (IR LED) is a semiconductor device that emits infrared light when an electric current passes through it. Similar to standard LEDs that emit visible light, IR LEDs are...

The process of mapping the infrared emittance of an area through the use of an infrared detector and related scanning instrumentation to produce thermal images that are then recorded on photographic...

A type of microscope that uses radiation in the infrared region to illuminate objects that are opaque to visible radiation. The microscope consists of two illumination systems (transmitted and...

Infrared optics refer to optical components and systems designed to manipulate and control infrared (IR) light, which lies beyond the visible spectrum. These components are crucial for various...

A spectrophotometer having a prism or, more frequently, a grating for the study and recording of infrared spectra. It usually consists of a radiation source such as a Nernst glower, a monochromator,...

Used to detect radiation from the infrared region. The functional process includes absorption of infrared radiation, which causes a temperature change, consequently altering the physical properties...

1. A thin parallel plate of material that transmits in the infrared region. See infrared optical material. 2. A spectral region (of the infrared) in which the atmosphere transmits.

Infrared (IR) refers to the region of the electromagnetic spectrum with wavelengths longer than those of visible light, but shorter than those of microwaves. The infrared spectrum spans wavelengths...

An InGaAs photodiode refers to a photodetector device that is constructed using a semiconductor material composed of a combination of indium (In), gallium (Ga), and arsenic (As). The term InGaAs...