Photonics Dictionary: S

With respect to television, the transmission of the signals that originate from variously colored parts of an image in a particular sequential order.

Raster scanning process like that of television: each line is scanned successively.

The maintenance of a fixed-phase relationship across the full diameter of a cross section of a laser beam.

The spatial distribution of incident and collected flux contained in the analysis of reflectance, transmittance or densities.

1. Generally, an emulsion mask having a clean annular region in an otherwise opaque region. It is designed to eliminate undesired information. 2. A pinhole in a metal plate, placed at a focal plane...

In image processing, the enhancement of an image by increasing or decreasing its spatial frequencies.

With a repetitive object such as a series of equispaced lines, the reciprocal of the line spacing in object or image, generally expressed in cycles per millimeter.

A beam instability, induced by index of refraction inhomogeneities and component damage of dirt and dust particles, that exhibits exponential growth and causes both system degradation and energy loss...

Spatial light interference microscopy (SLIM) is an optical microscopy technique that belongs to the category of quantitative phase imaging methods. It is designed to provide high-resolution,...

A spatial light modulator (SLM) is an optical device that modulates or manipulates the amplitude, phase, or polarization of light in two dimensions, typically in the form of an array. SLMs are...

Also known as transverse mode. The configurations of energy storage, relative to the structure of a laser resonator, that define the relative intensity distribution of the laser beam.

The change in position of the image of a sine wave object from its ideal position. Usually measured in degrees with 360° designating a full cycle of the image.

Spatial resolution refers to the level of detail or granularity in an image or a spatial dataset. It is a measure of the smallest discernible or resolvable features in the spatial domain, typically...

The correlation of radiation between the phases of monochromatic radiation emanating from two separate points.

Spatially offset Raman spectroscopy (SORS) is a technique that extends traditional Raman spectroscopy by incorporating measurements at different spatial offsets. This method allows for the selective...

The reversal of a developed image due to the exposure of the partially developed image to actinic light.

The simultaneous exposure of two holographic plates with emulsions facing the object. After deformation, a second pair of plates is exposed to the deformed object. The back plate of the initial pair...

A sapphire window refers to a transparent optical component made from sapphire crystal. Sapphire is a single-crystal form of aluminum oxide (Al2O3) that is highly prized for its exceptional optical...

1. A device used to trace out an object and build up an image. One of the most common of these types is video scanning. The scanning takes place inside the television tube as electrons, guided by...

In field-sequential color television, the rotating tricolor disc placed between the subject and the lens, or between the picture tube and the viewer.

Scanning electron microscopy (SEM) is an advanced imaging technique used in microscopy to obtain high-resolution, three-dimensional images of the surfaces of solid specimens. SEM achieves this by...

The spot illuminated on a cathode-ray tube by the initial impact of the scanning ray and the screen.

A high-resolution imaging instrument that can detect and measure the positions of individual atoms on the surface of a material. A very fine conductive probe is placed at a distance of 10 to 20...

Change of the spatial distribution of a beam of radiation when it interacts with a surface or a heterogeneous medium, in which process there is no change of wavelength of the radiation.

The angle between the initial and final paths traveled by a scattered particle or photon.

A scientific CMOS (complementary metal-oxide-semiconductor) camera is a type of digital camera specifically designed for scientific imaging applications. It employs CMOS sensor technology, which...

Scientific complementary metal-oxide semiconductor (sCMOS) refers to a type of image sensor technology specifically designed for scientific and industrial imaging applications. Unlike traditional...

A scintillation crystal, also known simply as a scintillator, is a material that emits light when it interacts with ionizing radiation such as gamma rays, x-rays, or charged particles. The emitted...

Second-order nonlinear optical properties refer to a class of phenomena exhibited by certain materials in response to intense light, typically in the realm of optics and photonics. Nonlinear optical...

A handheld navigational instrument used to measure the elevation angle of celestial bodies such as the sun. An image of the sun is viewed through a small telescope via two plane mirrors so that any...

Short wavelength infrared (SWIR) refers to the portion of the infrared spectrum that encompasses wavelengths roughly between 1,000 and 3,000 nanometers (nm). In the electromagnetic spectrum, infrared...

The electric conductance of a conductor in which a current of 1 ampere is produced by an electric potential difference of 1 volt.

Single-molecule Förster resonance energy transfer (smFRET) is a specialized technique in biophysics and molecular biology used to study the distances and dynamic interactions between two...

A single-photon avalanche diode (SPAD) is a specialized type of photodetector designed to detect extremely weak optical signals, down to the level of single photons. SPADs are widely used in...

A crystal, glass, or quartz slicing and cutting machine is a specialized piece of equipment used in the manufacturing process to precisely cut and slice materials such as crystals, glass, and quartz...

A solid-state laser is a type of laser that uses a solid gain medium (as opposed to a liquid or gas) to produce coherent light. The term "solid-state" refers to the fact that the active medium, where...

A power intensity pattern produced by the mutual interference of partially coherent beams that are subject to minute temporal and spatial fluctuations.

Spectral flow cytometry is an advanced flow cytometry technique that expands the capabilities of traditional flow cytometry by utilizing spectral information from fluorochromes to enhance...

Spectral repeatability refers to the consistency and reproducibility of spectral measurements across multiple trials or instances. It is a measure of how well a measurement instrument or system can...

A spectrophotometer is a scientific instrument used to measure the intensity of light at various wavelengths in the electromagnetic spectrum, typically in the visible and ultraviolet regions. It is...

A spectroradiometer is a device used to measure the intensity of light at different wavelengths across the electromagnetic spectrum. It provides a detailed spectral distribution of light, breaking...