Photonics Dictionary: T

A Ti:sapphire laser is a type of solid-state laser that utilizes a titanium-doped sapphire crystal as the gain medium. The name Ti:sapphire comes from the combination of titanium (Ti) as the dopant...

A characteristic of laser output, calculated by dividing the speed of light by the linewidth of the laser beam. The temporal coherence length of different lasers thus varies from a few centimeters to...

A terahertz spectrometer is a scientific instrument used to measure and analyze the properties of materials in the terahertz frequency range, typically spanning from about 0.1 to 10 terahertz (THz),...

The effect that characterizes an intense laser beam that is passed through an absorbing medium, causing the absorbed energy to produce density changes that can alter the intensity distribution of the...

In a laser, a measure of the device's ability to dissipate internally generated heat.

Thin-film coatings are layers of material applied to the surface of an object or substrate, typically to modify its optical, electrical, or mechanical properties. These coatings are composed of thin...

A laser having a material, such as ruby, that has an energy state structure of three levels: the ground state (1) wherein excitation applied to the material raises ions in the material into the...

In laser damage testing, the exposure of many sites of a sample to different intensities of laser irradiation to discover the point at which the laser induces failure of the material.

Although low in sensitivity (approximately 10-7 m for helium-neon lasers), this holographic technique permits quantitative assessment of entire vibratory patterns of given structures in a single...

Time-correlated single photon counting (TCSPC) is a technique used in photon counting applications, particularly in the field of experimental physics, biophysics, and fluorescence lifetime imaging...

A laser fitted with up to eight optical fibers that transmit the energy to different workstations in turn.

A time-to-amplitude converter (TAC) is an electronic circuit that converts a time interval between two events into an amplitude or voltage signal. TACs are commonly used in various scientific and...

Tip-enhanced Raman scattering (TERS) is a powerful technique that combines Raman spectroscopy with the enhanced spatial resolution provided by a sharp metallic or dielectric tip. TERS allows...

The study of the optical properties of living tissue. Increased understanding of the behavior of light in this varied, turbid medium, especially its scattering and absorption characteristics, is...

The use of a surgical laser instead of sutures or staples to close a wound or rejoin severed blood vessels.

In the context of optics and lasers, a transverse mode refers to a specific spatial pattern of the electric field within the cross-section of a laser beam. These modes represent the different...

The laser pumping that exhibits an advantage over longitudinal pumping in that the threshold pump power density can be lowered approximately in proportion to the laser length.

Abbreviated TEA CO2 laser. A gas laser that provides shorter pulses and higher peak powers than conventional CO2 lasers. The electrical excitation pulse occurs transversely to the optical axis...

Also known as TEA laser. A coherent optical source with a wide wavelength range in the infrared, visible and ultraviolet that uses an electrical discharge transverse to (across) the optical axis to...

A traveling wave tube (TWT) containing a photocathode and window that, receiving a laser beam, produces a modified photoelectric current that is accelerated and propagated into its helical frame.

A tool used in cutting circular holes around a center. Also, a laser cutter in which the beam moves in relation to the cut surface.

Any form of laser; e.g., a dye laser, having an output that can be adjusted over a wide range of wavelengths. Normally the range is about 70 nm wide.

Two-photon polymerization (TPP) is a technique used in additive manufacturing, specifically in the field of 3D printing. It involves using a focused laser to polymerize a photosensitive material in a...