Search
Menu
CASTECH INC - New Building the Bridge of Light
Photonics Marketplace
13 products

Photonics Products

Clear All Filters xepoxy x
Optical-Grade Epoxy
Optical-Grade Epoxy
Andover Corporation
  • Type: Other
  • Low Outgassing: <0.01%
  • Transmission Range: 300 nm - 2500 nm
Fiber Optic Isolator
Fiber Optic Isolator
DK Photonics Technology Limited
  • Type: Other
  • Max. Power Handling (CW): 0.3~100W
  • Operating Wavelength: 450~2100nm
  • Return Loss: ≥50dB
Fiber Optic Circulator
Fiber Optic Circulator
DK Photonics Technology Limited
  • Type: Other
  • Max. Power Handling (CW): 0.3~100W
  • Operating Wavelength: 450~2100nm
  • Return Loss: ≥50dB
Photodiode UVG20S
Photodiode UVG20S
Opto Diode Corporation
  • Type: Photodiodes
  • Light Spectrum: UV
  • Active Area (circular): 24 mm2
  • Responsivity @ 254 nm: 0.115 A/W (typical)
  • Rise Time: 4 µsec
AngstromBond AB9123 Heat Cure Epoxy (2.5G)
AngstromBond AB9123 Heat Cure Epoxy (2.5G)
Fiber Optic Center Inc.
  • Type: Epoxies
Optical Positioning Epoxy - OP-81-LS
Optical Positioning Epoxy - OP-81-LS
Dymax, Headquarters
  • Type: Adhesives
  • Durometer Hardness: D90
  • Elongation at Break, %: 2
  • Glass Transition, Tg °C: 153
Camera Module Optical Epoxy - 9803
Camera Module Optical Epoxy - 9803
Dymax, Headquarters
  • Type: Adhesives
  • Durometer Hardness: D94
  • Elongation at Break, %: 1.2
  • Glass Transition, Tg °C: 1.84
UV-6502CL - Clear UV cured epoxy adhesive
UV-6502CL - Clear UV cured epoxy adhesive
EpoxySet Inc.
  • Type: Other
  • Cure Shrinkage: >0.5%
  • Cure Time w/365nm: 10 seconds
  • Glass Transition Temp.: 135°C
Optical Display Adhesive - 9702
Optical Display Adhesive - 9702
Dymax, Headquarters
  • Type: Adhesives
  • Durometer Hardness: 00-70
  • Elongation at Break, %: 137
  • Glass Transition Tg, °C: 1
CORALIGN Moving Fiber Optic Switches
CORALIGN Moving Fiber Optic Switches
Luminos Photonics
  • Type: Switches
fibersect.multi
fibersect.multi
Phenix Fiber Optics LLC
  • Type: Cleavers
  • Cut Length: 0-600 µm
  • Fiber Protrusion Allowed: 0 to 10 mm
  • MT Ferrule Compatibility: 4 to 72 fibers
UV15DC80
UV15DC80
Master Bond Inc.
  • Type: Other
  • Service temperature range: -60°F to +350°F [-62°C to +177°C]
  • Tensile modulus, 75°F: >350,000 psi
  • Viscosity, uncured coating, 75°F: 45,000-60,000 cps
EP30-2LB
EP30-2LB
Master Bond Inc.
  • Type: Other
  • Blocks UV Light: between 200-400 nm
  • Epoxy: Optically Clear
  • Optical Transmission: from 450-900 nm and above
Photonics Products

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.