Large Fiber Collimators

The VTC 2400 IR camera from Instrument Systems GmbH enables production-ready testing of laser-based components and lidar systems. The device was developed for the far-field analysis of IR...

SENSR 2.2 3D perception software from Seoul Robotics can detect objects that are partially obstructed, fast-moving, or clustered together, in addition to providing unrivaled classification of...

The M30 Reference Design from Lumotive LLC and Lumentum Holdings Inc. is a complete software-defined sensor implementation to enable rapid adoption of light control metasurface (LCM™)-based...

The commercial off-the-shelf (COTS) 3-mm InGaAs quadrant pin receiver from CMC Electronics Inc. accurately detects wide optical signal levels for operations in harsh and varied environments. ...

Researchers at the University of Bonn have developed a method that significantly shortens the time required to be able to transport individual atoms via laser light in a vacuum. To perform quantum...

A lidar-based AR head-up display allows drivers to “see through” objects to alert of potential hazards without distraction. Researchers from the University of Cambridge, the University of...

Researchers at ETH Zurich have demonstrated direct femtosecond pulse emission from a QCL in the mid-infrared region. The demonstration, which the ETH Zurich researchers reported is the first of its...

The European Photonics Industry Consortium (EPIC) named Nicoletta Casanova to its board of directors. The consortium formally announced the appointment of Casanova, CEO and president of FEMTOprint, a...

Excimers are pulsed gas lasers that deliver high output power and pulse energies in the ultraviolet and deep-ultraviolet wavelengths. This enables them to power applications that cannot be supported...

To obtain optimal performance from a laser scanning system, the system integrator must carefully weigh the effects of each component and consider how best to implement hardware and software to...

Unlike an edge emitter, a VCSEL has a maximum operating power that is not limited by catastrophic optical damage of the exit aperture because its aperture is larger and its PN junction does not...

LIBS analysis is now being adopted as an attractive technique in a wide range of industrial applications: from sorting recycled metals to identifying future mining areas. In this white paper, we...

We performed a measurement on different Fast and Ultrafast laser sources with our Blink HS, a new generation of High Speed Laser Energy Sensor. We showed the “Turn on” transient effects, the “pulse...

Small, precise motion modules enhance NGS system design and performance. Following the Human Genome Project, companies are racing to develop Next-Gen Sequencing (NGS) instruments for DNA sequencing....

Acousto-optic modulators are important devices used in both ultrafast lasers and fiber sensing, such as picosecond and femtosecond laser systems for advanced manufacturing and biomedicine, and fiber...

A Free Webinar: Advances in Biomedical Photonics, Thursday, July 19, at 1 p.m. EDT/10 a.m. PDT/ 5 p.m. GMT/UTC Questions & Answers from the Webinar: Lihong V. Wang, PhD Gene...

Active optical technologies such as lidar have been scientifically evaluated in a broad range of fields. Nikolaus Schmitt provides a short overview of key application fields and lidar technologies...

AuSn thin film is a critical technology to enable an optoelectronic device to ensure durability, anti-oxidation ability, and reliability compared with indium, SnPb, SnBi, and others. The application...

Garrett D. Cole provides an overview of R&D and production efforts that relate to state-of-the-art thin-film optical coatings and interference structures. He includes a review of general coating...

A compact solid-state laser, referred to as DPSSL, created when a laser diode pumps light into either the sides or end of gain crystal. Depending on where the pumping occurs, high-quality and stable...

The use of lasers in tailoring of such components as thin-film resistors. The process improves speed and accuracy.

Decibels referenced to one milliwatt; often used to specify power ratings for semiconductor diode lasers.

A device which operates under the processes of absorption and stimulated emission and by the condition that gain exceeds loss in order to sustain amplification. The term laser is the acronym for...

Leonardo DRS Daylight Solutions' line of business is the world's leading provider of best-in-class, mid-infrared, quantum cascade laser sources for life sciences, research, industrial, and defense...

2-photon fluorescence microscopy has become a key technology in biological imaging in neuroscience enabling three-dimensional, noninvasive studies of the neuronal structure and activity on the...

At the exhibition, BWT exhibited more than 20 types of diode lasers, fiber lasers, and ultrafast lasers.

As a leader in the laser system and LED light sources business, Omicron-Laser has been developing, manufacturing, and distributing innovative laser and LED light sources since 1989. Omicron offers CW...

A fiber bragg grating is a section of an optical fiber where the refractive index has been altered at periodic intervals so that certain wavelengths are transmitted and others are reflected.

We are a manufacturer of Diffraction Limited Fiber Coupled Laser Systems, Optical Systems, and Fiber Optic Systems from 240 nm to 6000 nm. Unique products include various sizes of Fiber Collimators,...

FOCtek provides customers with all types of custom manufactured lenses, Precision Optical Components, Polarizing Optics, Prisms, Filters, Coatings, Optical Systems, Crystals, Nonlinear Crystals,...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

Ohara manufactures precision optical glasses: strip/slab, cut/molded blanks, pressings, high homogeneity blanks, fine gobs, polished ball lenses, near-UV transmitting i-Line glass, ceramic...