TOPO

The LVCM-025-029-02 and LVCM-025-029-02M miniature linear voice coil servo motors from Moticont are 1-in. diameter brushless devices. The high-speed devices offer high force-to-size ratios,...

HÜBNER Photonics, manufacturer of high-performance lasers for advanced imaging, detection, and analysis, proudly announces the next generation of VALO Femtosecond Series lasers, the Tidal. The...

The Gocator® 2600 series of smart 3D laser line profile sensors from LMI Technologies Inc. feature a resolution of 4K+. The factory pre-calibrated sensors come equipped with custom optics...

The DAG20-120-01 and the DAG20-120-04 motorized elevator stages from Optimal Engineering Systems Inc. are high-resolution, compact, low-profile devices with high-stability 120- × 120-mm tables...

Perovskite technology developer Caelux closed a $12 million series A3 funding round. The company’s series A total of $24 million will be allocated to support its factory ramp, R&D, and...

In laser powder bed fusion (LPBF) for the additive manufacture of metal parts, local high-temperature molten metal fits the surrounding solid part as a result of thermal expansion. As a negative...

Matt Eichenfield, a specialist in quantum photonics and distinguished member of the technical staff at Sandia National Laboratories, has joined the University of Arizona’s Wyant College of...

Ultrafast-laser manufacturer Chromacity appointed Robert Black and Richard Laming to its board directors as the company seeks to expand further into industrial markets. Black joins as nonexecutive...

Silicon photonics is widely considered a key enabling technology for further development of optical interconnect solutions needed to address growing traffic on the internet. From the first submarine...

Unlike an edge emitter, a VCSEL has a maximum operating power that is not limited by catastrophic optical damage of the exit aperture because its aperture is larger and its PN junction does not...

To obtain optimal performance from a laser scanning system, the system integrator must carefully weigh the effects of each component and consider how best to implement hardware and software to...

For any discussion of laser beam diagnostics, it is first necessary to define some terms that characterize beam properties. Broad definitions can include measurements of laser energy or power,...

Enabling new laser applications with fused silica fibers.

3m.i.k.r.o.n.™ is the technology platform for compact, efficient, fast and reliable lasers for a wide range of potential applications in the field of medical engineering and industry.

A key task faced by engineers using nonlinear crystals is the correct selection and effective specification of the appropriate NLO crystal for a particular laser design or application. GAMDAN Optics...

Progress in Laser Processing stems from advances in laser technology as well as the high-performance motion control and automation system directing the beam and/or moving the parts to be processed...

Multiphoton excitation and nonlinear imaging microscopy are being used increasingly in biomedical research for high-resolution live-cell imaging. However, traditional single photon techniques have a...

Vertical integration in high-power semiconductor lasers helps when addressing a variety of applications in pumping, materials processing, medical, and more. Jörg Neukum describes a series...

Automotive electrification is one of many major trends driving the evolution of high-volume laser processing systems for precision manufacturing. Applications ranging from the alignment and...

Lasers, LEDs, and photonics in general are providing new dimensions to industrial automation solutions, far beyond illumination and material treatment. They enable open work-cell production setups as...

A femtosecond laser is a type of laser that emits ultrashort pulses of light with durations on the order of femtoseconds, where one femtosecond is equal to 10-15 seconds. These lasers are capable of...

Also known as gatling gun laser. A system that has an array of lasers sharing a common central axis on a rotating Fabry plate to achieve increased laser firing rates by sequential Q-switching.

A diode-pumped solid-state laser (DPSSL) is a type of laser system that uses semiconductor diode lasers to pump energy into a solid gain medium, resulting in the generation of coherent light. This...

An optical resonator in which feedback is accomplished by two parallel planes. In diode lasers, the planes are obtained by cleaving, polishing, etching, etc.

Leonardo DRS Daylight Solutions' line of business is the world's leading provider of best-in-class, mid-infrared, quantum cascade laser sources for life sciences, research, industrial, and defense...

As a leader in the laser system and LED light sources business, Omicron-Laser has been developing, manufacturing, and distributing innovative laser and LED light sources since 1989. Omicron offers CW...

Telecentric Lenses are widely used in metrology instruments, laser marking systems, and AOI (Automatic Optical Inspection) machines. Here’s a 360 view of one of our custom Telecentric Lenses which...

At the exhibition, BWT exhibited more than 20 types of diode lasers, fiber lasers, and ultrafast lasers.

FOCtek provides customers with all types of custom manufactured lenses, Precision Optical Components, Polarizing Optics, Prisms, Filters, Coatings, Optical Systems, Crystals, Nonlinear Crystals,...

OHARA manufactures more than 130 environmentally safe optical glass types, free of both lead and arsenic. More than 300 tons of optical glass are melted per month, available in the following forms of...

Established in 1985, OZ Optics is a leading worldwide supplier of fiber optic components, test equipment and sensors. OZ Optics manufactures its products in three locations, Ottawa (Canada),...

LASER SAFETY • Eyewear • Barriers • Windows • Training laservision USA designs and manufactures a comprehensive assortment of custom-made laser safety eyewear that attenuates...