Positioning generally refers to the determination or identification of the location or placement of an object, person, or entity in a specific space or relative to a reference point. The term is used in various contexts, and the methods for...

An optical combiner, in the context of optics and display technologies, refers to a device or component that combines...

Custom lapping and polishing services involve specialized processes used to improve the surface finish and dimensional...

The unwanted and unpredictable fluctuations that distort a received signal and hence tend to obscure the desired message....

A linear positioning stage, also known as a linear stage or translation stage, is a precision mechanical device used to...

An unmanned aerial vehicle (UAV), commonly known as a drone, is an aircraft without a human pilot onboard. UAVs are remotely...

Additive manufacturing (AM), also known as 3D printing, is a manufacturing process that involves creating three-dimensional...

An electron lens consisting of a homogeneous axial electric field and a magnetic field used in high-quality image tubes for...

A fiber optic preform is a cylindrical glass rod or tube used as the starting material for manufacturing optical fibers. It...

A multiple-beam interferometer, usually consisting of two flat plates, with high reflective ability. The plates are set...

A GRIN (gradient index) lens is a type of optical lens that utilizes a gradient in refractive index across its volume rather...

A neuromorphic vision sensor is a type of imaging device designed to mimic the structure and functioning of the human visual...

A hyperspectral imaging camera is a sophisticated imaging device capable of capturing and processing data across a wide...

Diamond turning refers to a precision machining process used to produce complex optical components, particularly lenses and...

A telescope lens is a primary optical component of a telescope system that gathers and focuses light to form an image. It is...

An infrared detector is a device that is used to detect and measure infrared radiation, which lies beyond the visible...

Gain-switching is a technique used in lasers to generate short pulses of light by modulating the gain of the laser medium....

A machine vision lens is a specialized optical lens designed for use in machine vision systems, which are used for automated...

Thermal interface materials (TIMs) are substances or compounds used to enhance the thermal conductivity between two surfaces...

An infrared lens is an optical component specifically designed and optimized for transmitting, focusing, or manipulating...

Polymers are large molecules composed of repeating structural units called monomers. These monomers are chemically bonded...

The term "embedded laser" typically refers to a laser device that is integrated or embedded into a larger system or...

Low Earth orbit (LEO) refers to a region in space that is relatively close to Earth's surface, typically characterized by...

Thin-film deposition equipment refers to machinery and tools used in the process of depositing thin layers of material onto...

Multispectral imaging is a technique that involves capturing and analyzing images at multiple discrete spectral bands within...

Sapphire refers to a crystalline form of aluminum oxide (Al2O3) that is used in various optical and photonic applications...

A technique for reducing data processing requirements by electronically defining only a small portion of the image to be...

Linear receive optics typically refers to the optical components and systems used in the reception (detection) of linearly...

A laser crystal, also known as an active medium or gain medium, is a solid-state material used in the construction of...

Selective laser melting (SLM) is an additive manufacturing (AM) or 3D printing technology that belongs to the powder bed...

Chemical vapor deposition (CVD) equipment refers to a class of specialized apparatus used in the process of chemical vapor...

A high-speed motion camera, also known as a high-speed camera or slow-motion camera, is a specialized imaging device...

A cylindrical lens is an optical component that has different curvatures along its two orthogonal axes, resulting in a shape...

Integration time, in the context of optics, imaging systems, and sensor technology, refers to the duration over which a...

Camera Link HS (high speed) is a standard developed for high-speed digital data transmission in machine vision and...

An InGaAs (indium gallium arsenide) camera is a type of imaging device that utilizes InGaAs sensors to capture images in the...

Long-wave infrared (LWIR) refers to a specific range of the infrared spectrum. Infrared radiation is divided into three main...

An optical testing instrument is a device or system used to evaluate and measure the performance, quality, and...

Optical coatings are thin layers of materials applied to optical components, such as lenses, mirrors, filters, and prisms,...

Broadband dielectric mirrors, also known as broadband mirrors, are optical coatings designed to efficiently reflect or...

Hyperspectral resolution refers to the level of detail or granularity in the spectral information captured by a...

A sputtering target is a solid material used in the process of physical vapor deposition (PVD), specifically sputtering....

A laser cavity, also known as an optical cavity or resonator, is a fundamental component of a laser system. It is a confined...

Optical glass refers to a type of glass specifically engineered and manufactured for use in optical components and systems,...

A custom optic refers to an optical component that is designed, manufactured, and tailored to meet specific requirements or...

A Peltier cooler, also known as a thermoelectric cooler (TEC) or thermoelectric module, is a solid-state device that uses...

Piezoelectric motion systems are mechanical systems that utilize piezoelectric materials to generate controlled motion or...

Optical design and engineering services involve the development, customization, and optimization of optical systems and...

Multi-axis alignment refers to the process of aligning or adjusting components or systems in multiple spatial dimensions or...

A diode laser is a type of laser that uses a semiconductor diode as the active medium to generate coherent light....

Automated optical inspection (AOI) is a technology used in manufacturing processes, particularly in electronics, to...

Augmented reality (AR) is a technology that integrates digital information, typically in the form of computer-generated...

Freeform optics refers to the design and fabrication of optical surfaces that do not follow traditional symmetric shapes,...

A wide-angle lens is a type of camera lens that has a shorter focal length than a standard or normal lens, allowing it to...

A rear or front projection screen composed of minute optical surfaces that introduce a spread to the light beam that...

A lab-on-a-chip (LOC) is a miniaturized device that integrates various laboratory functions and capabilities onto a single,...

A long-pass filter is an optical filter that allows longer wavelengths of light to pass through while blocking or...

The entrance slit, also known simply as the slit, is an essential component in optical instruments such as spectrometers and...

Optical design software refers to specialized computer programs used by optical engineers, physicists, and designers to...

An oven or furnace that possesses the design requirements and heat control necessary to anneal glass for the optical...

A laser diode module is a compact device that incorporates a laser diode, optics, and often other components into a single...

Photonics contract manufacturing refers to the outsourcing of the production of photonics-related components, devices, or...

A galvanometric scanner, also known as a galvanometer scanner or galvo scanner, is a type of optical scanning device used to...

Lens testing equipment refers to a range of specialized tools and instruments used to evaluate the optical performance,...

Machine vision lighting refers to the use of specific lighting techniques and equipment in the field of machine vision,...

Functional materials refer to materials that possess specific properties or functionalities that make them suitable for...

A machine vision system is an integrated combination of hardware and software components designed to capture, process, and...

Photoresist is a light-sensitive material used in photolithography processes, particularly in the fabrication of...

A CubeSat is a type of miniaturized satellite characterized by its standardized size and modular design. CubeSats are...

Ultraviolet (UV) fiber optics refers to optical fibers that are designed and optimized for the transmission of ultraviolet...

An optical filter is a device that selectively transmits or blocks specific wavelengths, or colors, of light. Optical...

A standard for fiber optic data transmission systems being developed by the American National Standards Institute (ANSI) and...

A scintillation crystal, also known simply as a scintillator, is a material that emits light when it interacts with ionizing...

A beam shaper is an optical device or system designed to modify the spatial profile or intensity distribution of a laser or...

A CMOS camera refers to an imaging device that employs a complementary metal-oxide-semiconductor (CMOS) image sensor to...

A Fresnel lens is a type of optical lens that consists of a series of concentric grooves or steps carved into a flat, thin...

A fiber optic cable assembly refers to a complete unit consisting of optical fibers, connectors, protective jackets, and...

Design and engineering consulting services refer to professional services provided by specialized firms or individuals to...

Freeform mirrors refer to reflective optical components that deviate from traditional symmetric or rotationally symmetric...

Gallium nitride-based light-emitting diodes (GaN-based LEDs) are semiconductor devices that emit light when an electric...

A fiber optic gyroscope (FOG) is a type of gyroscope that uses the interference of light waves to detect changes in...

An optical assembly refers to a collection of optical components that are carefully arranged and aligned to perform a...

In the context of optical materials, the term "impurity level" refers to the presence of foreign atoms or molecules within...

Chip-on-board (COB) lights refer to a type of LED lighting technology where multiple LED chips are directly mounted onto a...

A holographic grating is a type of diffraction grating that is produced using holographic recording techniques. It consists...

A colorimeter is a device used to measure and quantify the color characteristics of an object or a light source. It provides...

An aspheric lens is a type of lens whose surface profiles deviate from the traditional spherical shape. Unlike spherical...

A fiber optic imaging bundle is a specialized optical device composed of multiple optical fibers bundled together. Each...

Laser optics refers to a broad category of optical components and systems designed for manipulating and controlling laser...

MWIR stands for mid-wave infrared, referring to a specific range of wavelengths within the infrared spectrum. Infrared...

Laser-mediated gene transfer refers to a technique in molecular biology and genetic engineering that utilizes lasers to...

Area in which laser operation occurs and therefore safety requirements are met and regulations are implemented. Lasers...

A lens blank is a piece of optical material in a raw, unfinished state, typically in the form of a disk or block, from which...