Gustafson Appointed to SEMI North America Advisory Board

The University of Strathclyde appointed Jennifer Hastie as director of its Institute of Photonics. Hastie was previously the institute’s deputy director and has worked there since joining as a...

Lidar Solutions developer Cepton Inc. appointed Mitch Hourtienne CCO, a newly created role for the company. Hourtienne joined Cepton in 2018 and helped establish the company’s center of...

ZEISS CFO Christian Müller will step down from the executive board at the end of this month. Company president and CEO Karl Lamprecht will temporarily take over CFO duties. Christian...

Materials technology company Confluent Medical Technologies has appointed Matthew K. Eckl as CFO. Eckl joins Confluent from CECO Environmental where he served as CFO. Previously he served as vice...

The Automation1 XA4 and iXA4 from Aerotech Inc. are PWM single- and multi-axis panel-mounted servo motor drives with full motion control and I/O expansion options. The XA4 communicates to Automation1...

The Photonis 25-mm image intensifier solution from Exosens is made for active detection applications in life science and scientific imaging. Based on Photonis Hi-CE MCP technology, the intensifier is...

The I16-G from Radiant Vision Systems is an imaging colorimeter and metrology solution that can be used to measure properties of light that influence the visual quality of devices such as LEDs,...

The ÅngströmBond® AB9123EP heat cure from Fiber Optic Center Inc. is an epoxy with short lead times and consistent dot-sized dispensing solutions for fiber optic applications. ...

When purchasing an industrial laser system, the astute buyer will look for a Class 1 laser product — a system where the laser beam hazard is completely enclosed and there is no potential laser...

Light is a versatile tool for investigating physical and chemical processes in nature. Any specific system being analyzed may, through the light it emits or reflects, communicate information about...

Technological advances have resulted in new, higher-quality sensors that enable machine vision cameras to deliver greater features and functionality at a lower cost than ever before. These factors...

Flat optics generally perform three main functions: They transmit light (windows), reflect light (mirrors), and fold light (prisms). While most optical manufacturers make spherical and flat optics, a...

Nanoscale motion requires fastidious attention to instrumentation, passive controls, and experiment design. Most users have experience in motion control within the sphere of the microscale. In this...

Short wave pass and long wave pass filters are a specialty of ours. Learn more...

A great "How-to" for cleaning optics. A must have for ALL.

This document outlines how Seiwa Optical's fully automated inspection equipment can increase the threshold, reduce chip loss, and decrease production costs of wafer manufacturing.

Imaging is a critical component of your machine vision solution, whether your field is security, manufacturing, aerospace, defense, building & construction or R&D. Selecting the wrong camera...

Presenters: Professor Stephen Boppart The Future of Healthcare With Optical Biomedical Imaging A medical doctor and professor at the University of Illinois, Boppart's...

Spectroscopy employs photonic tools to ascertain certain characteristics of matter. The ever-increasing push towards studying matter within application spaces demanding low size, weight, power, and...

This webinar will present instruments and their respective uses for UV-VIS-NIR and Fourier transform infrared (FTIR) spectroscopy, some of the most commonly used analytical techniques prevalent in...

A photovoltaic cell, commonly known as a solar cell, is a semiconductor device that directly converts light energy into electrical energy through the photovoltaic effect. The photovoltaic effect is...

A transition boundary between two regions having different properties in a P-type semiconducting material.

A semiconductor formed by applying a particular single-crystal layer to the specific insulator.

Thermophotovoltaic (TPV) refers to a technology that converts heat energy into electricity using the principles of thermophotovoltaics. In a thermophotovoltaic system, thermal radiation from a heat...

In this month's Light Matters Extra, we take you to the Quantum Photonics Laboratory at MIT run by Dr. Dirk Englund. Dr. Englund's group, the Quantum Photonics Group, is made up of postdocs and...

Students from large and small size companies and bigger Department of Defense affiliates of the AIM Photonics Institute took part in the recent AIM Photonics Summer Academy at MIT. This was the third...

Tune into this month's edition of Light Matters for 'Part 1' of an exclusive interview with SPIE CEO, Eugene Arthurs, as he speaks about his upcoming retirement. We’ll also take you to Rochester,...

In this month's Light Matters Extra, we give you an in-depth look at the recent Luminate Lightning Awards. New York’s Lieutenant Governor Kathy Hochul was there and tells us why Luminate is important...

Specialized Products Yelo Laser Burn-In and Life-Test System: Qualification systems provide a modular tightly controlled environment in which to Burn-In and Life-Test photonics components such as...

As a provider of precision automation and motion control systems, Aerotech offers a complete range of motion and automation solutions to our clients. Our standard product offerings include: ...

Since 1975 Valley Design Corp. has been an industry leader in advanced materials processing, as providers of precision lapping, polishing, dicing, 4- and 5-axis CNC machining, grinding, core drilling...

Opto Diode Corporation (Camarillo, CA), an ITW Company, delivers industry-leading sensors, photodiodes, IR detectors, photonic modules, assemblies, and LEDs. Available in standard and custom designs,...