Close

Search

Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics EuroPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook

Daily-Use Light Source Converts IR to Blue Light for Sterilization, Disinfection

Facebook Twitter LinkedIn Email Comments
A microcavity device that converts infrared (IR) radiation into blue light could enable safe, daily use of deep ultraviolet (DUV) light for disinfection and sterilization.

The device was developed by a research group from Osaka University and was built without a polarity-inverted structure. The lack of reliance on birefringence or the periodically polarization inverted structure expands the flexibility in the selection of the device structures and the materials — giving the researchers more flexibility in the selection of structures and materials for the wavelength conversion to convert to DUV light.

Digital camera image of blue second harmonic light emission with a wavelength of 428 nm using an IR cutoff filter. Courtesy of Osaka University.
Digital camera image of blue second-harmonic light emission with a wavelength of 428 nm using an IR cutoff filter. Courtesy of Osaka University.
A DUV wavelength range of 220 to 230 nm is desirable if DUV light is to be used safely as a disinfectant. Although wavelength conversion offers a potential solution to achieving this as-yet unrealized wavelength, conventional ferroelectric wavelength conversion materials cannot be used, due to absorption edge.

To realize DUV light for bactericidal use, the researchers constructed a monolithic, microcavity, second-harmonic-generation (SHG) device using a low-birefringence paraelectric material and a dielectric material. They used two high-reflectivity distributed Bragg reflectors (DBRs) to double the frequency of light coming into the device. The DBRs strengthened the intensity of a fundamental wave in the microcavity. Counter-propagating SHG waves were efficiently generated in a very short region close to a coherence length.

As a first step toward practical application of their approach, the researchers built a gallium nitride (GaN) microcavity device using microfabrication technology, including dry etching and anisotropic wet etching for vertical and smooth DBR sidewalls. When they demonstrated wavelength conversion in the GaN microcavity, they observed a 428-nm blue SHG wave in the absence of a polarity-inverted structure.

Schematic of GaN monolithic microcavity SHG device on an Si pedestal structure. Courtesy of Osaka University.
Schematic of GaN monolithic microcavity SHG device on an Si pedestal structure. Courtesy of Osaka University.
Nitride semiconductors such as GaN and aluminum nitride (AlN) have relatively high optical nonlinearity, making them suitable for use in wavelength conversion devices; AlN is particularly suitable for DUV wavelength conversion devices, due to its transparency to 210 nm. However, realizing structures with periodically inverted polarity, like the structures in conventional ferroelectric wavelength conversion devices, has proven to be difficult using these materials.

“Our device can be adapted to use a broader range of materials,” professor Masahiro Uemukai said. “They can be applied to deep ultraviolet light emission or even broadband photon pair generation.”

The researchers hope their flexible approach to wavelength conversion will make future nonlinear optical devices easier to construct.

The research was published in Applied Physics Express (www.doi.org/10.35848/1882-0786/abff9e).

Photonics Handbook
GLOSSARY
polarization
With respect to light radiation, the restriction of the vibrations of the magnetic or electric field vector to a single plane. In a beam of electromagnetic radiation, the polarization direction is the direction of the electric field vector (with no distinction between positive and negative as the field oscillates back and forth). The polarization vector is always in the plane at right angles to the beam direction. Near some given stationary point in space the polarization direction in the beam...
birefringence
The separation of a light beam, as it penetrates a doubly refracting object, into two diverging beams, commonly known as ordinary and extraordinary beams.
second-harmonic generation
A process whereby two fields of the same optical frequency interact in a nonlinear material to produce a third field, which has a frequency twice that of the two input fields.
Research & TechnologyeducationAsia PacificOsaka UniversityJapanUVDUVdeep ultravioletmedicalultravioletlight sourcesmaterialsopticspolarizationwavelength conversionmicromicromachineslight conversioninfrared radiationnonlinear optical devicesnanoscale and nonlinear optical design and measurementstructuresbirefringencebirefringent componentssecond-harmonic generation

Comments
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2021 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x We deliver – right to your inbox. Subscribe FREE to our newsletters.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.