Photonics Dictionary: P

The production of a positron-electron pair by a photon having energy greater than one mega-electron-volt, whereby some of the photon energy is converted to the rest mass of the pair.

In interlaced television scanning, an effect in which the lines of one field fail to fall exactly within the lines of the following field, both fields comprising one frame of the picture. The lines...

A concave mirror that has the form of a paraboloid of revolution. The paraboloidal mirror may have only a portion of a paraboloidal surface through which the axis does not pass, and is known as an...

A thin, stretched plastic membrane cemented to a rigid supporting ring. It may be coated to act as a beamsplitter, for example, in a color camera; it is so thin that no perceptible image doubling...

A photonic integrated circuit (PIC) is a compact and integrated device that incorporates multiple photonic components and functions on a single chip, similar to the way electronic integrated circuits...

A vacuum gauge designed to measure very high degrees of vacuum by thermal conduction.

A polygonal mirror, also known as a multifaceted mirror or facet mirror, is a type of optical component used in various laser systems, optical scanners, and imaging devices. It consists of a flat or...

A contour mapping technique that involves projection of a grating onto an object to produce a shadow grating that is observed through another grating. Therefore, the size of the object to be measured...

Unlike the thermocouple or bolometer, the pyroelectric infrared detector is a current source with an output proportional to the rate of change of its temperature. Capable of extremely rapid response...

Color sensitivity extended to cover the entire visible spectrum out to the red.

A camera designed to form a continuous record of an expansive section of the horizon. The typical panoramic camera is mounted to rotate about a vertical axis. A slit opening in the film plane and the...

The image distortion produced by a panoramic camera with a swinging lens or a swinging mirror in front of a fixed lens. The magnification is greatest in the center and diminishes to each side in the...

A telescope so manufactured that the image remains erect and the position of the eyepiece is unchanged as the line of sight is pointed in any horizontal direction.

The angular difference in the direction of an object as seen from two points of observation. The angle subtended at the object by the base length of a rangefinder.

Parallel scanning refers to a method of acquiring data or images simultaneously from multiple sources or in parallel, rather than sequentially scanning each source one after another. This approach is...

A pair of waveguides with axes normal to the plane and that guide uniform cylindrical waves.

Characteristic of optical analyses that are limited to infinitesimally small apertures. Also called first-order or Gaussian optics.

One eyepiece of a set having equal distances from their mounting interface to their image plane, permitting freedom to interchange eyepieces without the need to refocus.

Particle acceleration refers to the process by which charged particles, such as electrons or protons, gain kinetic energy and increase their velocity. This acceleration can occur in various natural...

An array of lines in the infrared region of the emission spectrum of atomic hydrogen. Their wave numbers are expressed by the equation: where represents the wave number in the reciprocal centimeters,...

A mounting used for large concave gratings, whereby the slit, grating and plate holder lie in the Rowland circle, and the photographic plates lie along a large portion of the circle. In this way, a...

An OLED display formed by creating an array of OLED pixels connected by intersecting anode and cathode conductors arranged in rows and columns. Electrical power is passed through selected pixels by...

The criterion maintaining that if light follows a specific path through an optical system, it will, if reversed, traverse that same path in the opposite direction.

A pathogen is a biological agent, such as a virus, bacterium, fungus, protozoan, or parasite, that causes disease in its host organism. Pathogens have the capability to invade host tissues,...

A prism made up of two air-spaced components. It has the ability to revert, and not invert, an image, and can be used in convergent, divergent and parallel light. May be rotated to compensate for...

A Peltier cooler, also known as a thermoelectric cooler (TEC) or thermoelectric module, is a solid-state device that uses the Peltier effect to transfer heat between two electrical junctions. It can...

In astronomy, the main lobe of an antenna pattern that has a small angular extent in two mutually perpendicular directions. Invisible in space, it would resemble a searchlight beam.

A five-sided prism containing two reflecting surfaces at 45° to each other, and two refracting faces perpendicular to the entering and emerging beams. The deviation angle of 90° is...

An optical instrument designed to displace the line of sight in a vertical direction. For submarines and other military uses the periscope is a long tube containing prisms at both ends and...

The term perovskite refers to a specific crystal structure commonly found in various materials. Perovskite structures have a cubic arrangement of oxygen ions, forming a framework within which other...

A phage, short for bacteriophage, is a type of virus that infects and replicates within bacteria. Phages are composed of genetic material (either DNA or RNA) surrounded by a protein coat. They are...

In optics and photonics, "phase" refers to a property of electromagnetic waves, such as light, that describes the position of a wave at a given point in time within its oscillation cycle. More...

A term for the ring-shaped stop in a phase contrast microscope. The phase annulus limits the amount of light that reaches the phase plate from the direction of the specimen and retards the light by a...

The use of a reflective device, which can be fashioned from a variety of materials including gases, solids, dyes, aerosols, semiconductor crystals and plasmas, to replicate a laser beam by reversing...

With respect to a traveling plane wave at a known frequency, the space rate of decrease of phase of a field component in the direction of propagation, measured in radians per unit length.

Phase contrast microscopy is an optical microscopy technique that enhances the contrast of transparent and colorless specimens, making it possible to visualize fine details and internal structures...

In optics and photolithography, a phase mask refers to a device that modifies the phase of light waves passing through it. The phase mask is used to control the spatial distribution of the light's...

Phase matching is a crucial concept in the field of optics, particularly in nonlinear optics and the generation of coherent light. It refers to the condition where the phases of two or more waves,...

A technique used to generate a phase shift between reference and sample light beams. The phase shift can be performed through the use of a mirror that is moved along the optic axis by a piezoelectric...

A microscope that has an annular stop in the lower focal plane of the condenser, and a quarter-wave retarding and absorbing ring in the upper focal plane of the objective that just fills the image of...

A circuit that uses feedback to synchronize the phase of a voltage-controlled oscillator with the phase of an incoming or reference signal.

A phase-modulated sensor is a type of sensor that uses modulation of the phase of a signal to measure changes in a physical quantity. In such sensors, variations in the phase of the signal are...