Photonics Dictionary: I

A spectrophotometer having a prism or, more frequently, a grating for the study and recording of infrared spectra. It usually consists of a radiation source such as a Nernst glower, a monochromator,...

The measurement of the ability of matter to absorb, transmit or reflect infrared radiation and the relating of the resultant data to chemical structure.

A small round mirror on the end of a handle used for viewing inside an inaccessible cavity.

The spectrum produced by the interference of light provided that the source used to create the interference has a broad enough emittance to form a spectrum.

Also known as the Bragg spectrometer. A system used for the x-ray analysis of crystal structure. In the instrument, a homogeneous beam of x-rays is directed on the known face of a crystal and the...

A spectroscopic technique in which an excitation band absorbs laser energy resulting in an electronic transition. The isotopic species may then be measured using a time of flight mass spectrometer....

A theoretical instrument conceived of as a box that receives a beam of radiation of any arbitrary polarization angle and produces a new beam, coaxial with the incident beam, having a specified new...

In semiconductor physics and materials science, the term "III-V materials" refers to compounds composed of elements from group III and group V of the periodic table. More specifically, these...

Source of radiation defined or specified by its spectral power distribution.

The general term for the application of light to a subject. It should not be used in place of the specific quantity illuminance.

An image intensifier, also known as an image intensification tube or image intensification device, is a specialized electronic device used to amplify low-light-level images to make them visible to...

A system of elements which rotates the optical image with respect to the optical axis by a factor of pi radians.

In optics, the term image jump refers to a displacement or shift in the apparent position of an image when a change occurs in the optical system. This phenomenon is often observed in certain types of...

The active control of various aspects (optical element position, airspace thickness, etc.) of an optical system that compensates for unwanted movement of the image that is caused by mechanical and...

An eyepiece having a special prism arrangement linked to a micrometer screw to allow reading of the angular relations between the two prism segments to be varied. When the prism faces are parallel,...

An oil required by oil-immersion objectives that is applied between the exterior of the objective lens and a cover glass or appropriate specimen.

The technique that uses light to detect and analyze the antibodies produced by a specimen stained with an organic dye.

Immunohistochemistry (IHC) is a method for detecting antigens or haptens in cells of a tissue section by using labeled antibodies to bind specifically to their antigens. IHC is used for disease...

In the context of optical materials, the term "impurity level" refers to the presence of foreign atoms or molecules within the material that deviate from its regular or intrinsic composition. These...

An InGaAs (indium gallium arsenide) camera is a type of imaging device that utilizes InGaAs sensors to capture images in the near-infrared (NIR) spectrum. InGaAs is a semiconductor material that is...

Indium phosphide (InP) is a compound semiconductor material composed of indium (In) and phosphorus (P). It belongs to the III-V group of semiconductors, where elements from groups III and V of the...

Inductance is a fundamental property of an electrical circuit or component that describes its ability to store energy in a magnetic field when an electric current flows through it. It is typically...

An infrared camera, also known as a thermal imaging camera or IR camera, is a device that captures and visualizes the infrared radiation emitted by objects, revealing temperature variations across...

An infrared detector is a device that is used to detect and measure infrared radiation, which lies beyond the visible spectrum of light. These detectors are utilized in various applications,...

A filter exhibiting transparency, absorption or reflectance characteristics specifically for spectral control of wavelengths longer than 700 µm.

Any of the photoelectric and thermal detectors, spectrographs and monochromators, thermographs, scanners, amplifier tubes, snooperscopes and related equipment developed for use with infrared...

An infrared lens is an optical component specifically designed and optimized for transmitting, focusing, or manipulating infrared (IR) radiation within the infrared spectrum. These lenses are used in...

An infrared light source is a device that emits light in the infrared spectrum, which lies beyond the visible spectrum of light. Infrared light has longer wavelengths than visible light and is...

An infrared light-emitting diode (IR LED) is a semiconductor device that emits infrared light when an electric current passes through it. Similar to standard LEDs that emit visible light, IR LEDs are...

A direct method of measuring refractive index that works best with flat-surfaced samples (i.e., those that are not dependent on special prism shapes) and produces data that are uniquely sensitive to...

Infrared optics refer to optical components and systems designed to manipulate and control infrared (IR) light, which lies beyond the visible spectrum. These components are crucial for various...

Any object that emits radiation of a wavelength lying between about 0.75 to 1000 µm. A calibrated secondary source usually is a heated cavity (blackbody) or a filament lamp rated in wattage...

1. A thin parallel plate of material that transmits in the infrared region. See infrared optical material. 2. A spectral region (of the infrared) in which the atmosphere transmits.

Infrared (IR) refers to the region of the electromagnetic spectrum with wavelengths longer than those of visible light, but shorter than those of microwaves. The infrared spectrum spans wavelengths...

An InGaAs photodiode refers to a photodetector device that is constructed using a semiconductor material composed of a combination of indium (In), gallium (Ga), and arsenic (As). The term InGaAs...

Broadening of a laser's spectral linewidth when the resonance frequencies of the atoms (or molecules) of the medium are not homogeneous on the same transition. An example is Doppler broadening.

In a camera, the movement of one or more lenses behind the front lens, rather than of the front lens itself, to bring the subject into focus. Because internal focusing does not require the front lens...

Instantaneous field of view (iFOV) is a term commonly used in the context of remote sensing, imaging systems, and optical instruments. It refers to the specific portion of a scene that an optical...

With respect to color photography, the measurement of the way the color film modulates the radiant flux in the optical system containing the film.

Integrated photonics is a field of study and technology that involves the integration of optical components, such as lasers, modulators, detectors, and waveguides, on a single chip or substrate. The...

A hollow sphere coated internally with a white diffusing material and provided with openings for incident beam, specimen and detector used for measuring the diffuse reflectance or transmittance of...

Integration time, in the context of optics, imaging systems, and sensor technology, refers to the duration over which a sensor collects and accumulates incoming light or signal. It is a crucial...

An intensified charge-coupled device (ICCD) camera is an advanced imaging device that combines the capabilities of both an image intensifier and a charge-coupled device (CCD) sensor to achieve...

An interband cascade laser (ICL) is a type of semiconductor laser that operates based on interband transitions between energy bands in a semiconductor material. Unlike traditional semiconductor...

A filter that controls the spectral composition of transmitted energy partially by the effects of interference. Frequently, these filters are made up of thin layers of metals and dielectrics,...

A special form of microscope that utilizes interference for observing and measuring the phase and optical thickness in completely transparent objects and specimen. The object is placed in one beam...

Interferometric modulator display (IMOD) is a type of display technology used in electronic devices, known for its energy efficiency and ability to produce high-quality reflective color displays....

Interlayer attraction refers to the attractive forces between adjacent layers of atoms or molecules in a material, particularly in layered structures such as van der Waals solids, graphene, and...