Photonics Dictionary: C

A microscope that allows examination of a small crystal and conveniently provides linearly polarized object and reference beams so that, by suitable orientation of an anisotropic crystal, the optical...

The electron beam tube of a television camera that converts an optical image into a pattern of electrostatic charges and then scans the pattern to produce a corresponding electronic signal for...

In a laser, the optical resonator formed by two coaxial mirrors, one totally and one partially reflective, positioned so that laser oscillations occur.

A CCD image sensor, or charge-coupled device image sensor, is a type of electronic device used to convert optical images into electronic signals. It is a key component in digital cameras, camcorders,...

An adhesive used for bonding optical elements or for holding devices.

Chalcogenide refers to a class of compounds containing elements from group 16 of the periodic table, which includes sulfur (S), selenium (Se), and tellurium (Te). These elements are known as...

Chirped mirrors are optical devices designed to manipulate the spectral properties of ultrashort laser pulses. They consist of multiple layers of dielectric coatings deposited on a substrate, where...

Chromatic aberration is an optical phenomenon that occurs when different wavelengths (colors) of light are refracted by a lens or optical system, leading to a failure to focus all colors to the same...

An optical instrument used to track and image a test vehicle (target) throughout its flight. The cinesextant frequently includes multiple devices such as high-speed video and film cameras as well as...

A mode that is confined by virtue of a lower-index medium surrounding the cladding. Cladding modes, in the terminology of mode descriptors, are equivalent to cladding rays in the terminology of...

A mechanism or device, especially a coating with a refractive index equal to or slightly greater than that of an optical fiber's cladding, that removes modes propagating through the cladding by...

In optics, degreasers or ultrasonic arrangements used for removing pitch, cement or polishing material from lenses during manufacture. It also may refer to manual cleaning devices used immediately...

The limited light-gathering area of an optical system. The area is normally restricted to an edge or outer surface of an individual component. Also known as free aperture or objective aperture. The...

In a visual optical system, the axial distance from the last mechanical surface of the eyepiece to the exit pupil.

A defect in an optical system that prevents rays from reaching their intended destination; it can be caused by an undersized aperture, a baffle out of position, etc. In imaging applications, removing...

A fiber optic communications system that works on the principles of homodyning or heterodyning. The transmitting laser produces an optical wave that is modulated in amplitude, phase or frequency by...

A coherent fiber bundle (CFB), also known as a coherent fiber optic bundle, is an assembly of multiple optical fibers arranged in a specific geometric pattern to maintain the spatial coherence of...

An optical instrument used to determine the distance to a target being viewed. Two similar optical systems view the target via 45° mirrors at the ends of a fixed baseline. One system creates the...

Cold atoms refer to atoms that have been cooled to extremely low temperatures, typically in the microkelvin (µK) to nanokelvin (nK) range, close to absolute zero (0 Kelvin or -273.15°C). At...

An optical instrument consisting of a well- corrected objective lens or mirror with a light source and or object/image (i.e. illuminated slit or retical) at its focal plane. Collimators are used to...

A color center, in the context of materials science and condensed matter physics, refers to a specific type of crystallographic defect in a crystalline structure that introduces color to the...

Computer vision enables computers to interpret and make decisions based on visual data, such as images and videos. It involves the development of algorithms, techniques, and systems that enable...

A computer-generated hologram (CGH) is a holographic image produced using computational methods and algorithms, rather than traditional optical techniques. CGHs are generated entirely in digital form...

Concave is an adjective used to describe a surface or shape that curves inward or has a hollow or recessed appearance. In the context of geometry or optics, a concave shape is one that curves or...

Concave and convex spherical mirrors are types of curved mirrors that have surfaces shaped like segments of spheres. These mirrors are commonly used in optics for various applications, including...

A confocal resonator, also known as a confocal cavity or confocal laser resonator, is a type of optical resonator configuration used in laser systems. The term confocal in this context refers to the...

That property of certain optical devices, e.g., a penta prism, that maintains the angular relationship between the entering and the emerging rays traversing the system regardless of the orientation...

The radiography of small objects having detail too fine to be seen by the unaided eye. The resulting negative, when optically enlarged, can be examined.

1. In optics, the bending of light rays toward each other, as by a convex or positive lens. 2. Turning in the eyes to view a near object. 3. In a television picture tube, the crossing of the...

Convex is an adjective used to describe a surface or shape that curves outward, bulges, or has a rounded and outwardly extending appearance. In the context of geometry or optics, a convex shape is...

A corner cube, also known as a corner reflector or retroreflector prism, is a type of optical device used to reflect light or electromagnetic waves back towards their source with minimal deviation in...

1. In color development, the chemical that combines with certain by-products of the development procedure to form a dye. 2. Device for distributing optical power among two or more ports. 3. Device...

Fine lines, wires or threads used in the focal plane of many optical instruments to point out and locate particular objects in the field of view. They were formerly made from a single strand of...

The use of chemicals or radiation to induce a desired change in a substance; e.g., some optical adhesives are set by exposure to ultraviolet light and are said to be UV-curing.