Photonics Dictionary

Second-order nonlinear optical properties refer to a class of phenomena exhibited by certain materials in response to intense light, typically in the realm of optics and photonics. Nonlinear optical...

A self-interference effect that generates random patterns; secondary speckle pattern (SSP) typically occurs in diffuse reflections of a laser on paper, white paint or rough surfaces. By tracking both...

Selective laser melting (SLM) is an additive manufacturing (AM) or 3D printing technology that belongs to the powder bed fusion category. SLM is primarily used for metal additive manufacturing, where...

Self-phase modulation (SPM) is a nonlinear optical phenomenon that occurs when an intense laser beam passes through a medium, causing a change in the phase of the light due to its interaction with...

The Shack-Hartmann wavefront sensor is an optical device used for measuring the wavefront aberrations of an optical system. It is widely used in adaptive optics systems to correct distortions and...

A model that predicts laser-induced damage to thin films caused by irradiation of identical, randomly distributed film defects.

A laser whose output is limited to a single wavelength.

Single-molecule Förster resonance energy transfer (smFRET) is a specialized technique in biophysics and molecular biology used to study the distances and dynamic interactions between two...

A single-photon avalanche diode (SPAD) is a specialized type of photodetector designed to detect extremely weak optical signals, down to the level of single photons. SPADs are widely used in...

Solid-state laser geometry in which the standard rod is replaced by a slab of laser material. Often called total-internal-reflection face-pumped laser (TIR-FPL).

A crystal, glass, or quartz slicing and cutting machine is a specialized piece of equipment used in the manufacturing process to precisely cut and slice materials such as crystals, glass, and quartz...

An array of active optical devices (modulators, laser diodes and/or detectors), each of whose electrical inputs or outputs are directly connected to electronic logic circuits, which also are a part...

A gelatinous fluid that can be used as a porous thin-film coating for optical components, including laser beam collimators, or as a protective coating for glass and crystalline materials.

A laser pumped by solar radiation focused by mirrors.

1. The reduction in the developable density of a photographic emulsion that has been extremely overexposed. 2. In a laser system, damage resulting from ultraviolet radiation that degrades the lasing...

Any isolated wave that propagates without dispersion of energy. Specifically to photonics, an ultrashort pulse of laser light that propagates through a waveguide without characteristic chromatic...

A color center laser whose output is coupled to an external control laser cavity and then fed back to the main laser cavity to provide enhanced pulse shaping, leading to ultrashort pulse generation.

The diagnostic procedure that uses ultrasonic energy to probe the body and, with the help of laser beams, a reflecting membrane to produce a three-dimensional picture.

The maintenance of a fixed-phase relationship across the full diameter of a cross section of a laser beam.

1. Generally, an emulsion mask having a clean annular region in an otherwise opaque region. It is designed to eliminate undesired information. 2. A pinhole in a metal plate, placed at a focal plane...

A spatial light modulator (SLM) is an optical device that modulates or manipulates the amplitude, phase, or polarization of light in two dimensions, typically in the form of an array. SLMs are...

Also known as transverse mode. The configurations of energy storage, relative to the structure of a laser resonator, that define the relative intensity distribution of the laser beam.

Spatially offset Raman spectroscopy (SORS) is a technique that extends traditional Raman spectroscopy by incorporating measurements at different spatial offsets. This method allows for the selective...

In laser systems, the granular effect that is noted when observing the expanded cross section of a laser beam.

Refers to the variety of techniques that use the interference pattern produced by laser light diffusely reflected by an object. There are two basic techniques: direct laser photography, used when...

Spectral flow cytometry is an advanced flow cytometry technique that expands the capabilities of traditional flow cytometry by utilizing spectral information from fluorochromes to enhance...

Gas detection measurement technique that uses a built-in capacitative microphone to calculate the amount of absorbed laser power in a gas cell according to variations of gas pressure.

A spheric lens, also known as a spherical lens, is a type of optical lens with at least one surface that is part of a sphere. This means that the lens surface is curved in a symmetrical manner,...

A semiconductor laser that operates in the infrared and that is pumped with strong pulses of radiation from a second laser. Dependent on quantum-mechanical principles, it can be tuned over a large...

An instrument that divides a single laser beam in two and uses one half as a sensing beam and the other as a reference beam, then recombines the two and measures any phase shift between them. The...

A laser resonator in which a mode oscillating between the mirrors will converge upon the laser's longitudinal axis.

A memory system composed of a stack of holographic plates, a mode-locked laser and a rapid detector array. Ultrashort laser pulses are used to extract information from the stack. In this way, storage...

A type of laser used when a great amount of power is required. Avoiding the bulk of large numbers of optical lenses, this instrument offers high-output intensity and a small emitting region at...

In a laser, the voltage necessary to initiate electrical discharge, somewhat higher than that needed to sustain it.

The degree to which a laser beam is aligned parallel to the housing axis.

STED microscopy, or stimulated emission depletion microscopy, is a superresolution imaging technique in fluorescence microscopy that surpasses the diffraction limit, enabling the visualization of...

A method of creating real three-dimensional models by using lasers driven by CAD software. In contrast to the normal practice of removing material, this process polymerizes a liquid to quickly...

The purest gas source of antimony, which is used in the manufacture of compound semiconductors for IR sensors and solid-state lasers.

In Stimulated Brillouin Scattering (SBS), an incident photon (usually laser light) interacts with acoustic phonons in a medium. The energy and momentum of the incident photon are transferred to the...