Search
Menu
Lambda Research Optics, Inc. - Limited Time Offer
Photonics Marketplace
81 products

Photonics Products

Clear All Filters xcut x
Cool-Cut™ Low Absorption Lenses
Cool-Cut™ Low Absorption Lenses
Meller Optics Inc.
  • Type: Lenses
  • Lens Category: Spherical Lens
  • Absorption: 0.25 % total
  • AR Coating Reflectivity: R < 0.15 % at 10.6 micron
  • Centering Tolerance: 3 Arc Minutes Maximum
ClearCut Laser Engine
ClearCut Laser Engine
Power Technology Inc.
  • Type: Semiconductor
  • Max. Power: 100W
  • Wavelength: 445 - 465nm
  • Wavelength - Tunable?: No
  • Operating Mode: Continuous
  • Cooling: Air Cooled
  • Modulation (kHz): 0-100
  • Rack Mount Units (Standard 19”): 3
IR Cut Filter- ISK Series
IR Cut Filter- ISK Series
Isuzu Glass Inc.
  • Type: Filters
  • Diameter / Dimension: 2 - 300mm
  • Filter Category: IR Filter
MES-360 PO
MES-360 PO
Satisloh GmbH
  • Type: Other
CW DPSS Laser Module
CW DPSS Laser Module
Lumispot Tech
  • Type: Solid-State
  • Max. Power: 50W
  • Wavelength: 1064 - 1064nm
  • Operating Mode: Continuous
  • Beam Diam.: 38mm
  • TEM: Multimode
  • Q-Switchable?: No
  • Crystal Rod Size: Ø2*73 mm
  • Power Output: ≥50W
  • Water Flow: ≥ 8 L/min
Dual Gate
Dual Gate
PhotoniCore Technologies
  • Type: Other
IDS NXT Cameras: image analysis with AI
IDS NXT Cameras: image analysis with AI
IDS Imaging Development Systems GmbH
  • Type: CMOS
  • Max. Resolution: 5.01MP
  • Sensor Width (pixels): 2448
  • Sensor Height (pixels): 2048
  • Scan Type & Rate: Area
  • Interface: GigE
  • Color/Mono.: Both
Freeform Optics
Freeform Optics
Avantier Inc.
  • Type: Other
IR Optics
IR Optics
Avantier Inc.
  • Type: Other
Polarizing Beamsplitters
Polarizing Beamsplitters
Avantier Inc.
  • Type: Beamsplitters
  • Beamsplitter Category: Cube Beamsplitter
  • Beam Deviation: < 5 arcmin
  • Dimensions: +0.1 mm
  • Extinction Ratio: 100:1
Band-Pass Filter Glass
Band-Pass Filter Glass
Avantier Inc.
  • Type: Filters
  • Filter Category: Bandpass Filter
Convex Spherical Mirrors
Convex Spherical Mirrors
Avantier Inc.
  • Type: Mirrors
  • Diameter / Dimension: -0.1 - 0mm
  • Mirror Category: Convex Mirror
  • Clear aperture: >90% diameter
  • Surface flatness: λ/4
  • Surface quality: 40-20
F-theta Lenses
F-theta Lenses
Avantier Inc.
  • Type: Other
  • Custom Optical Coating: UV to visible to infrared
  • Distortion (Max.): <0.25%
  • Focal Length: from 63mm to 635mm
Aspheric Lenses
Aspheric Lenses
Avantier Inc.
  • Type: Lenses
  • Diameter / Dimension: 1 - 1000mm
  • Lens Category: Aspherical Lens
  • Asphere Figure Error(P-V): 3μm – smaller than 0.06μm
  • Centering (Beam Deviation: 3 arcmin – 0.5 arcmin
  • Diameter Tolerance: +0/-0.100mm – +0/-0.010mm
2MP 1080p Sony Starvis Board Camera
2MP 1080p Sony Starvis Board Camera
Videology Industrial-Grade Cameras
  • Type: CMOS
  • Max. Resolution: 2MP
  • Sensor Width (pixels): 1920
  • Sensor Height (pixels): 1080
  • Scan Type & Rate: Area
  • Interface: Other
  • Color/Mono.: Both
S4LFT3340-075
S4LFT3340-075
Sill Optics
  • Type: Lenses
  • aperture stop [mm]: 27.8
  • design wavelength [nm]: 343 - 355
  • effective focal length [mm]: 340
powerSCAN with Variable-Image-Field
powerSCAN with Variable-Image-Field
SCANLAB GmbH
  • Type: Other
Plano Convex Lenses
Plano Convex Lenses
Meller Optics Inc.
  • Type: Lenses
  • Diameter / Dimension: 15.24 - 63.5mm
  • Lens Category: Spherical Lens
  • AR Coating Reflectivity: R < 0.5 % at 10.6 microns
  • Centering Tolerance: 3 Arc Minutes Maximum
  • Diameter Tolerance: + 0.000″ / – 0.005″
Plano Concave Lenses
Plano Concave Lenses
Meller Optics Inc.
  • Type: Lenses
  • Lens Category: Spherical Lens
  • Centering Tolerance: 3 Arc Minutes Maximum
  • Diameter Tolerance: + 0.000″ / – 0.005″
  • Focal Length Tolerance: +/- 0.5 %
Mini Pulsed Fiber Laser For Automotive Lidar
Mini Pulsed Fiber Laser For Automotive Lidar
Lumispot Tech
  • Type: Fiber
  • Max. Power: 0.75kW
  • Wavelength: 1533 - 1537nm
  • Operating Mode: Pulsed
  • Max. Pulse Rate: 2MHz
  • Pulse Length: 5ns
  • Output Fiber Length: 0.5m
  • Packaging Size: 55×55×15mm
  • Weight: 60g
Fiber Coating all around
Fiber Coating all around
LASEROPTIK GmbH
  • Type: Fiber Coatings
Filters for Raman Spectroscopy
Filters for Raman Spectroscopy
Iridian Spectral Technologies
  • Type: Filters
  • Filter Category: Bandpass Filter
Aegis Diamond Like Carbon System
Aegis Diamond Like Carbon System
Intlvac Thin Film Corp.
  • Type: Coating Systems
  • Coating: Pinhole free
  • Durable: Wear Resistant
  • Film Production: Consistent Uniformity
BBO Crystals
BBO Crystals
GAMDAN Optics Inc.
  • Type: Crystals
FREDmpc Optical Engineering software
FREDmpc Optical Engineering software
Photon Engineering LLC
  • Type: Optical Design
precSYS 5-axis micromachining system
precSYS 5-axis micromachining system
SCANLAB GmbH
  • Type: 3 Axis
  • Weight: 30kg
HASTILITE Nano Silicon Polish
HASTILITE Nano Silicon Polish
Universal Photonics Inc.
  • Type: Polishing Material and Pads
  • % Solids: 15 - 20
  • Particle Size D50 (μm): 0.110 - 0.140
  • Particle Size D99 (μm): < 0.389
CX Series Cameras
CX Series Cameras
Baumer Ltd.
  • Type: CMOS
  • Max. Resolution: 4096MP
  • Sensor Width (pixels): 3.45
  • Sensor Height (pixels): 3.45
  • Interface: 10GigE,USB 3.0
  • Color/Mono.: Color
Custom Glass Wafers
Custom Glass Wafers
Sydor Optics Inc.
  • Type: Wafers
  • Diameter / Dimension: 0 - 450mm
  • Bow / Warp: ≥ 3µm
  • Thickness: ≥ 0.1mm
  • Thickness Tolerance: ± 0.003mm
TrueTest Automated Visual Inspection Software
TrueTest Automated Visual Inspection Software
Radiant Vision Systems, Test & Measurement
  • Type: Image Analysis
  • Automated Test Sequencing: Y
  • Camera: ProMetric Imaging System
  • Image Analsysis: Y
Silicon (Si) material
Silicon (Si) material
Henan UM Optics Ltd. (Umoptics)
  • Type: Blanks
  • Diameter / Dimension: 3 - 350mm
  • Diameter: 3.0-350 mm
  • Doped: N,P,intrinsic
  • Grow method: Cz and Fz
Steep-Edge Long Pass Filter
Steep-Edge Long Pass Filter
Andover Corporation
  • Type: Filters
  • Diameter / Dimension: 12.5 - 50mm
  • Filter Category: Other
  • High Stability: <20 ppm
  • High Temperature: 300 °C
  • Steep Slope: <1.0%
P5P14 Laser Safety Window Film
P5P14 Laser Safety Window Film
Laservision USA
  • Type: Barriers & Curtains
Laser Scanning Lenses
Laser Scanning Lenses
Special Optics Inc.
  • Type: Lenses
ACE Laser Cutting System
ACE Laser Cutting System
KNUTH Machine Tools USA Inc.
  • Type: Fiber
  • Max. Power: 8kW
  • Classification (IEC): Class 1
BlueCut
BlueCut
Menlo Systems Inc.
  • Type: Fiber
  • Max. Power: 10W
  • Classification (IEC): Class 4
  • Wavelength: 1030nm
  • Wavelength - Tunable?: No
  • Operating Mode: Pulsed
  • Max. Pulse Rate: 10MHz
  • Beam quality: M^2 <1.25 (typ. 1.20)
  • Long term power stability: <1% rns (12 h)
  • Selectable repetition rate: single pulse to 10 MHz
Z-Cut Quartz Windows
Z-Cut Quartz Windows
UQG (Optics) Ltd.
  • Type: Windows
  • Diameter / Dimension: 5 - 150mm
Aegis Diamond Like Carbon System
Aegis Diamond Like Carbon System
Intlvac Inc.
  • Type: Coating Systems
  • Coating: Pinhole free
  • Durable: Wear Resistant
  • Film Production: Consistent Uniformity
Tangor 300
Tangor 300
Amplitude
  • Type: Solid-State
  • Max. Power: 300W
  • Wavelength: 343 - 1030nm
  • Operating Mode: Pulsed
  • Max. Pulse Rate: 40Hz
  • Max. Pulse Energy: 3mJ
  • Pulse Length: 500
  • Beam Circularity: 87%
  • Beam Pointing Stability: 15 μrad over 100 hours
  • Beam Quality: M² 1.3≅
UKKO Picosecond Infrared (1064 nm) Fiber Laser
UKKO Picosecond Infrared (1064 nm) Fiber Laser
Evolase Oy
  • Type: Fiber
  • Max. Power: 10W
  • Classification (IEC): Class 4
  • Wavelength: 1064nm
  • Operating Mode: Pulsed
  • Max. Pulse Rate: 20MHz
  • Max. Pulse Energy: 60
  • Air Cooled: Yes
  • Average Power: >10W
  • Msquare: <1.3
AQH-8953
AQH-8953
Amglo Kemlite Laboratories Inc., Xenon Lamp Div.
  • Type: Flashlamps
Laser Engraver
Laser Engraver
GCC America Inc.
  • Type: Gas
  • Max. Power: 60W
  • Classification (IEC): Class 4
  • Active Laser Medium: CO2
  • Dimensions (W×L×H): 44.3 × 28.3 × 39.6 in.
  • Max. Motor Speed: 42 IPS
  • Work Area: 25 × 18 in.
Desktop Laser Engraver
Desktop Laser Engraver
GCC America Inc.
  • Type: Gas
  • Max. Power: 40W
  • Classification (IEC): Class 4
  • Active Laser Medium: CO2
  • Dimensions (W×L×H): 29.1 × 30.7 × 16.1 in.
  • Max. Motor Speed: 40 IPS
  • Work Area: 18 × 12 in.
S400 Laser Engraver
S400 Laser Engraver
GCC America Inc.
  • Type: Gas
  • Max. Power: 120W
  • Classification (IEC): Class 4
  • Wavelength: 10.6µm
  • Active Laser Medium: CO2 & Fiber
  • Dimensions (W×L×H): 56.7 × 34.5 × 41.3 in.
  • Max. Motor Speed: 140 IPS
  • Work Area: 40 × 24 in.
Hybrid Laser Engraver
Hybrid Laser Engraver
GCC America Inc.
  • Type: Gas
  • Max. Power: 100W
  • Classification (IEC): Class 4
  • Wavelength: 10.6µm
  • Active Laser Medium: CO2 & Fiber
  • Dimensions (WxLxH): 53.7 × 34.6 × 39.7 in.
  • Max. Motor Speed: 80 IPS
  • Work Area: 38 × 24 in.
Hybrid Laser Engraver MG380
Hybrid Laser Engraver MG380
GCC America Inc.
  • Type: Gas
  • Max. Power: 100W
  • Classification (IEC): Class 4
  • Active Laser Medium: CO2
  • Dimensions (W×L×H): 68.9 × 48.9 × 40 in.
  • Max. Motor Speed: 40 IPS
  • Work Area: 38 × 24 in.
Microprobe
Microprobe
Timegate Instruments Ltd.
  • Type: Equipment
4K Motorized Lens Family
4K Motorized Lens Family
Theia Technologies
  • Type: Lenses
  • Lens Category: Aspherical Lens
Cryogenic Grinding
Cryogenic Grinding
Fritsch GmbH - Milling and Sizing
  • Type: Other
508PV Microscope Spectrophotometer
508PV Microscope Spectrophotometer
CRAIC Technologies
  • Type: Benchtop
  • Measurement Techniques: Absorption,Emission,Fluorescence,Reflectance and Transmission
  • Spectral Range (nm): 200 - 2100
  • Max. Resolution (nm): 1

Photonics Products

We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.