Close

Search

Search Menu
Photonics Media Photonics Marketplace Photonics Spectra BioPhotonics Vision Spectra Photonics Showcase Photonics ProdSpec Photonics Handbook
Hamamatsu Corp. - RoHS-Compliant IR LEDs Detectors

Other Sensor & Detector Products | SENSORS & DETECTORS


Photonics ProdSpec is your source for Sensors & Detectors. Choose a category, filter by product specifications, view details about the products listed, and request a quote from vendors whose products fit your application.
v Show Filters v
  • TYPE



  • COMPANY
  • v
    Key Suppliers
  • v
    Country
  • Search:
CLEAR SELECTIONS
Sort:
1-10 of 44 items  12345
 per page
NanoCam HD Surface Profiler
NanoCam HD Surface Profiler
4D Technology Corporation, United States
The NanoCam HD Dynamic Profiler provides accurate measurements of surface roughness on small meter-scale coated and uncoated Optics, metals, plastics and other polished specular surfaces. This lightweight profiler can be easily positioned on large parts by hand or mounted on a robotic arm to measure with sub-angstrom level precision.
  • Type: System
  • Surface Roughness: Sub-angstrom

Microscopy Temperature Control System
Microscopy Temperature Control System
Boston Electronics Corporation, United States
VAHEAT microscopy temperature control system locally controls sample temperature, even when working with an immersion medium. Users can avoid excessive heating of the objective or other optical components while benefiting from fast and precise temperature feedback. The sample is prepared on a smart substrate that is equipped with a transparent heating element and a precise temperature probe. Heating rates of up to 100 °C/s enable new types of experiments while ensuring temperature...
  • Type: Equipment

OSI Optoelectronics Inc.
Solderable Chips
OSI Optoelectronics Inc., United States
Low cost approach to tasks that require large active area photodetectors with or w/o flying leads. These planar diffused Si photodiode chip series is ideal for solar cell, low cost light monitoring diode laser monitoring. Various sizes and large active areas with high shunt resistance - good for "disposable" detector applications.
  • Type: Component
  • Peak Responsivity Wavelength: 970 nm
  • Responsivity: min. 0.60 A/W; typ. 0.65 A/W
  • Various Active Areas: from 4.7 to 189.0 mm(2)
  • Dark Current Ranges at -5V: from 20 to 1200 nA (max.)

AKD Electronic Autocollimator
AKD Electronic Autocollimator
Vermont Photonics Technologies Corp., United States
The Vermont Photonics AKD is a USB powered Electronic Autocollimator with standard or customized software. The AKD replaces a display head with a laptop or desktop computer allowing greater flexibility in data collection and analysis.
  • Type: Equipment
  • Accuracy: ±0.8 - ±5 arcsec
  • Focal Length: 90 - 500mm

SIAM (Secondary Image Angle Measuring Device)
SIAM (Secondary Image Angle Measuring Device)
Vermont Photonics Technologies Corp., United States
The SIAM is a measuring device for the determination of angles between primary and secondary images for windshields. The SIAM uses a collimated laser as a source, and a telescope equipped with a log sensitivity camera as a detector. This allows the primary and secondary image to both be detected on the same camera without over saturating the image. The instrument works in compliance with ECE R43.
  • Type: Equipment

KM Series Motorized Collimators
KM Series Motorized Collimators
Vermont Photonics Technologies Corp., United States
The motorized collimators of the KM product line were developed for "Active Alignment" of cameras for the automotive industry. The high-precision linear motion guide, modular design, and simple command structure allow users to integrate these OEM collimators into their measurement setups easily.
  • Type: Equipment
  • Focal Length: 15-75mm

GONIOMAT A PLUS
GONIOMAT A PLUS
Vermont Photonics Technologies Corp., United States
The innovative, fully automatic GONIOMAT APLUS is distinguished by its highly precise bearing with backlash- and maintenance-free drive that reaches the same accuracy as a comparable air bearing. Thus the GONIOMAT APLUS does not require any compressed air. So it is just as portable as the other goniometers.
  • Type: Equipment
  • Accuracy Multiple Measurement: ±0.4 arcsec
  • Accuracy Single Measurement: ±0.6 arcsec
  • Accuracy Pyramidal Angle: ±1.0 arcsec
  • Max. Pyramidal Angle: 20 arcmin
  • Max. Specemin Diameter: 210 mm

ELCOMAT 5000
ELCOMAT 5000
Vermont Photonics Technologies Corp., United States
In addition to a larger measuring range and an even better signal-to-noise ratio due to the direct signal processing of the measuring head, the ELCOMAT 5000 has a 10-fold higher measuring frequency than its predecessor, the ELCOMAT 3000. In addition, internal alignment sensors can be used for fast and precise alignment of the measuring head and "on-the-fly" straightness measurement.
  • Type: Equipment
  • Accuracy over total range: ±0.25 arcsec
  • Accuracy over 20" range: ±0.1 arcsec
  • Measuring range (X,Y): 3000x3000 arcsec
  • Max measuring distance: 25 meters
  • Focal length: 300 mm
  • Free aperture: 50 mm

MEMS VOA
MEMS VOA
CSRayzer Optical Technology, China
Mirror MEMS attenuators are based on a micro-electro-mechanical system (MEMS) technology. The MEMS attenuators design achieves highly repeatable optical attenuation over C and/or L band through an electrically movable mirror on silicon. The products are Telcordia GR-1221-CORE qualified and RoHS compliant.
  • Type: Component
  • Operation Wavelength: 1528~1565 nm
  • Attenuation Type: Dark or Bright
  • Attenuation Range: 0 ~ 40dB
  • Response Time: 1 ms
  • Driving Power: <5 μw
  • Package Size(Dia × L): 5.5×19(Without boot)

Prometheus Colorimeter
Prometheus Colorimeter
Admesy BV, Netherlands
Prometheus is your solution for all types of spot measurement on displays. Developed to your needs, this colorimeter series adds flicker and response time measurement options to the color measurements. Like all Admesy series, Prometheus is robust for 24/7 use, easy to integrate in production environments and offers an excellent price-performance ratio. Available with a wide variety of lens options.
  • Type: Equipment
  • Optical Systems: 2.1, 5, 10 mm, 20mm, 27 mm
  • Photodetector: XYZ interference filters
  • Luminance Accuracy: 1.5 % (model depen.)
  • Chromaticity Accuracy: 0.0015 CIExy
  • Measurement Speed: up to 45 samples / second
  • Measurement Parameters: XYZ, Yxy, CCT, Flicker, response time




1-10 of 44 items  12345
back to top
Facebook Twitter Instagram LinkedIn YouTube RSS
©2022 Photonics Media, 100 West St., Pittsfield, MA, 01201 USA, [email protected]

Photonics Media, Laurin Publishing
x Wish you were here? Click to become an exhibitor today.
We use cookies to improve user experience and analyze our website traffic as stated in our Privacy Policy. By using this website, you agree to the use of cookies unless you have disabled them.