Photonics Dictionary

The use of a tightly focused beam of electrons to drill minute holes in substances. The drilling is accomplished by the evaporation of the material in the desired circumference by the intense heat of...

A method of thin-film deposition in which electrons boiled off a heated cathode are used to melt the coating material. If a multipocket crucible is used, many materials can be processed at the same...

The method by which photographic film is scanned by an electron beam. One technique uses the uniform light of a television screen, focused by a lens onto the processed film, as a means of creating a...

1. A device generally used in a cathode-ray or camera tube to emit a stream of electrons moving at uniform velocity in a straight line. It consists of an emitting cathode and an anode, with an...

An electron-beam lithography (EBL) system is a sophisticated nanofabrication tool used in the semiconductor industry and research laboratories to pattern extremely fine features with sub-micrometer...

The recording of the information contained in a modulated electron beam onto photographic or silicon resin-coated materials. A direct recording method involves the passage of the recording medium...

An electron-gun system is an assembly used to generate and control a focused beam of electrons. Electron guns find applications in various fields, including cathode ray tubes (CRTs), electron...

The photographic recording of an image formed by the alteration in electrical properties of the sensitive materials and induced by the action of light.

A process used in document copying and printing that involves the visible rendering of an invisible electrostatic image on a photoconductive material by its treatment with oppositely charged pigment...

An electrowetting display (EWD) is a type of electronic display technology that utilizes the principles of electrowetting to control the behavior of colored oil droplets on a hydrophobic surface....

Ellipsometry is an optical technique used to characterize the properties of thin films and surfaces. It is based on the measurement of changes in the polarization state of light reflected or...

The use of a material's emissivity to measure absorption. It is useful as an absorption loss measurement technique, since at thermal equilibrium, emittance is equal to absorptance.

In photography, the layer of light-sensitive material (usually a suspension of silver halide crystals) that coats the film or plate.

An endoscope is a medical device used for visualizing and examining the interior of hollow organs, body cavities, or confined spaces within the body. It consists of a flexible or rigid tube equipped...

The occurrence of very large rotations in transparent materials at weak magnetic fields as predicted in the classical dispersion theory. This effect was discovered by Mavaluso and Corbino in 1898 in...

The movement of particulate material by flowing gas or liquid.

Epitaxial refers to the growth of a crystalline layer on a crystalline substrate in such a way that the orientation of the crystal lattice of the growing layer is related to that of the substrate. In...

Epitaxial deposition is a process used in semiconductor manufacturing and materials science to grow a thin crystalline layer, known as an epitaxial layer, on a substrate. The term epitaxial refers to...

Epitaxial equipment refers to a set of specialized tools and systems used in the process of epitaxy, which is the growth of crystalline layers on a substrate material. Epitaxial growth is a critical...

A well controlled thin films technique for growing films with good crystal structure in ultra high vacuum environments at very low deposition rates. Epitaxy methods are well known for the growing of...

An optical fiber that can be used to amplify an optical input. Erbium rare earth ions are added to the fiber core material as a dopant in typical levels of a few hundred parts per million. The fiber...

An etalon is an optical device that consists of two parallel reflecting surfaces separated by a precise and known distance. It operates based on the principle of optical interference and is used to...

Etaloning is an optical phenomenon that occurs in imaging systems, particularly in devices such as spectrometers, interferometers, and cameras. It is characterized by the appearance of interference...

An acid used to etch the surfaces of particular materials. For glass, hydrofluoric acid is used either as a liquid or a vapor. Metals are etched by means of suitable acids or other liquids, often to...

The material that has the lowest possible constant melting point of any possible combination of the same components.

Coating carried out in a sealed chamber evacuated by a mechanical pump in series with an oil diffusion pump to a pressure less than 10-4 mm of mercury, measured by a vacuum gauge. At such a low...

An excimer laser is a type of ultraviolet laser that emits short pulses of light in the ultraviolet spectrum. The term excimer is derived from excited dimer, reflecting the nature of the gain medium...

Excimer laser coronary angioplasty (ELCA) refers to a medical procedure used in the treatment of coronary artery disease. This technique involves the use of an excimer laser to perform angioplasty, a...

1. The process by which an atom acquires energy sufficient to raise it to a quantum state higher than its ground state. 2. More specifically with respect to lasers, the process by which the material...

An exciton is a quasiparticle that represents the bound state of an electron and a hole in a solid-state material, typically a semiconductor or an insulator. In simpler terms, an exciton is a paired...

Extreme ultraviolet (EUV) refers to a specific range of electromagnetic radiation in the ultraviolet part of the spectrum. EUV radiation has wavelengths between 10 and 124 nanometers, which...

A photodetector composed of a semiconductor material whose responsive properties can be altered by the addition of impurities to the basic material. Copper- and mercury-doped germanium are both...

A device in which slab geometry internally compensates for thermal-optic distortion; the solid host material -- glass or Nd:YAG -- is in the form of a rectangular slab with plane parallel faces. The...

The Faraday effect, named after the English scientist Michael Faraday, is a phenomenon in physics where the polarization plane of light is rotated when the light passes through a transparent medium...

In a birefringent material, the index of refraction varies with the direction of vibration of a lightwave. That direction having a low refractive index is the fast axis; at right angles to it is the...

The decrease of a component's efficiency, or a reduction in a material's light sensitivity, as the result of accumulated exposures to radiant energy.

A femtosecond laser is a type of laser that emits ultrashort pulses of light with durations on the order of femtoseconds, where one femtosecond is equal to 10-15 seconds. These lasers are capable of...

The properties of certain materials that cause them to have relative permeabilities that exceed unity. This permeability permits the materials to exhibit hysteresis.

A fiber laser is a type of laser in which the active gain medium is an optical fiber doped with rare-earth ions such as erbium, ytterbium, or neodymium. Fiber lasers generate coherent light through...

A fiber optic cable assembly refers to a complete unit consisting of optical fibers, connectors, protective jackets, and other components that are assembled together to facilitate the transmission of...

A fiber optic preform is a cylindrical glass rod or tube used as the starting material for manufacturing optical fibers. It serves as the precursor from which optical fibers are drawn. The process of...

A fiber optic spectrometer is a device used for measuring the spectral content of light. It utilizes optical fibers to transmit light from a source to a spectrometer unit, where the light is...

The face of a cathode-ray tube (CRT) that has a fiber optic sheet attached to its surface. The sheet's fibers are at right angles to the face, allowing the transmittance of the fluorescent trace...

A fiber-coupled photoconductive antenna (FCPA) is a type of optoelectronic device that combines a photoconductive antenna with optical fibers for the purpose of generating or detecting terahertz...

Relation between a material's transport rate and the material's concentration gradient and the diffusion coefficient.

Filoviruses are a family of viruses that are responsible for severe and often fatal hemorrhagic fevers in humans and non-human primates. The name "filovirus" is derived from their filamentous...