Photonics Dictionary: W

A system used for gratings that consists of a concave mirror, a grating and a plate holder mounted normal to the grating to reduce astigmatism and spherical aberration. The mounting yields a...

In the context of electronics and semiconductor manufacturing, a wafer refers to a thin, flat disk or substrate made of a semiconducting material, usually crystalline silicon. Wafers serve as the...

An image intensifier tube in which the photocathode and the output of the microchannel plate are proximity-focused on the microchannel plate input and output phosphor screen, respectively.

A standard of luminous intensity evaluated as the luminous intensity of 1 cm2 of a blackbody at the melting point of platinum.

A solution containing colloidal silica particles.

The power that gives rise to the production of energy at the rate of 1 joule per second.

1. An undulation or vibration; a form of movement by which all radiant energy of the electromagnetic spectrum is estimated to travel. 2. A type of surface defect, usually due to improper polishing.

The point function in a wave equation that represents the amplitude.

The frequency of a wave divided by its velocity of propagation; the reciprocal of the wavelength.

Also referred to as physical optics - the area of optics in which the wave nature of light is essential when defining its propagation. To exploit the wave phenomena of light, one must interact light...

An optical element having two principal axes, slow and fast, that resolve an incident polarized beam into two mutually perpendicular polarized beams. The emerging beam recombines to form a particular...

Any type of interference produced by a beamsplitter.

The continuous group of waves that persists for a short time only.

A device designed to measure the amplitude and frequency of the elements in a complex waveform.

An oscilloscope used to survey the waveform of a video signal.

The graph of the oscillating variations making up a wave, relative to time.

In considering a field of electromagnetic energy emanating from a source, the wavefront is a surface connecting all field points that are equidistant from the source.

For each mode in an optical waveguide, the term used to describe the process by which an electromagnetic signal is distorted by virtue of the dependence of the phase and group velocities on...

Gas laser in which the tube acts as a channel for the laser beam.

A device that consists of two types of mode converters, one of which must be magnetic. It is nonreciprocal because the coupling constants of the two mode converters have a different phase relation...

Scattering (other than material scattering) that is attributable to variations of geometry and index profile of the waveguide.

A waveguide is a physical structure or device that is designed to confine and guide electromagnetic waves, such as radio waves, microwaves, or light waves. It is commonly used in communication...

A system that allows the transmission of more than one signal over a common path, by assigning each signal a different frequency band. Also known as frequency division multiplexing.

A device that measures the wavelength of an electromagnetic wave.

A beamsplitting mirror that reflects as a function of wavelength.

A photofluorescent compound that, when used with a scintillating substance, absorbs photons and emits related photons having a greater wavelength. In this way a phototube or photocell may employ the...

Electromagnetic energy is transmitted in the form of a sinusoidal wave. The wavelength is the physical distance covered by one cycle of this wave; it is inversely proportional to frequency.

A fiber for which the difference between the maximum and the minimum refractive index is small, usually less than 1 percent.

The law stating that the just-perceptible increment of stimulus is a constant fraction of the stimulus.

The magnetic flux that, linking a circuit of one turn, produces in it an electromotive force of one volt as it is reduced to zero at a uniform rate in one second.

An optical filter so constructed that the density increases progressively from one end to the other, or angularly around a circular disc.

A photometer that uses a wedge, marked to show its reduction of flux density, to make two light sources equal in intensity for comparison of luminous intensities. This is accomplished by the gradual...

A diffraction pattern sampling unit composed of a 32-element monolithic silicon photodiode array and a readout unit. The intensity on each detector element can be separately read out by means of a...

A spectrograph in which the flux density transmitted through the entrance aperture is regulated by an optical wedge or similar device.

A method of specifying the allowable edge-thickness difference or decentering of a lens.

An optical element having plane-inclined surfaces. Usually the faces are inclined toward one another at very small angles. Wedges divert light toward their thicker portions, and may be circular,...

Also known as cathode-ray tube grid or shield. A cylindrically shaped electrode that, containing the cathode of a cathode-ray tube with opposite potential, is designed to focus and control the...

A statistical means of characterizing the failure of a fiber or device as related to strain or time. Results are plotted on a special graph paper to yield the distribution shape parameter.

The Weissenberg method, named after the German physicist Karl Weissenberg, is a technique used in x-ray crystallography for obtaining high-quality diffraction patterns from single crystals. This...

A well plate, also known as a microplate or microtiter plate, is a flat plate with multiple small wells or depressions arranged in a grid pattern. Each well serves as a separate container for holding...