Optics & Optical Fabrication
Photonics ProdSpec is your source for Optics & Optical Fabrication. Choose a section, filter by spec, view details, request a quote.
1-10 of 38 items 1234
per page
v Show Filters v
PromotedPREMIER PRODUCT
HASTILITE MOV 850Universal Photonics Inc., United StatesHASTILITE MOV 850 for Clean CNC Polishing HASTILITE MOV 850 is used for critical polishing applications on a variety of glass types, glass-ceramics, and some optical crystals. HASTILITE MOV 850 was created with rare earth and other oxides that have been finely processed to produce narrow sub-micron particle size range. HASTILITE MOV 850 contains technical enhancements for improved settling, and efficient polishing characteristics.
- Type: Polishing Material and Pads
- pH: 7.8 - 8.8
- Solid Content (%): 40 - 50
- Particle Size D50 (μm): 0.3 - 0.5
- Particle Size D99 (μm): < 2
- Density (g/mL): 1.4 - 1.6
- Size Availability: 1 Gallon, 1 Pint
Water Resistant AdhesivesNorland Products Inc., United StatesNorland Products offers NOA 51, NOA 52, and NOA 53 UV and/or visible light curing optical adhesives that survive long-term exposure to 85C/85% relative humidity both in between substrates and on their surface when used as a coating. These one component, solventless adhesives come in different viscosities and have excellent adhesion to glass, plastics, and metal.
Optical Adhesive 1622HNorland Products Inc., United StatesSoft and rubbery UV/heat cure optical adhesive with a refractive index of 1622.
X-59 Strip CoatingUniversal Photonics Inc., United StatesX-59 Strip Coating is a multi-purpose protective coating for all types of optical surfaces, affording protection in both production and handling applications. Simply brush on X-59 Strip Coating in thin even strokes and remove by applying tape at the edge of coating and peel away. Any remaining residue can be dissolved with a solvent.
- Type: Other
- Color: Black
- Tack Free Time (min): 15 - 30
- Full Dry Time (hr): 24
- Specific Gravity: 0.84 - 0.96
- Viscosity (#2 ZAHN, sec): 30 - 40
- Size Availability: 1gl
CP PITCH for Continuous PolishingUniversal Photonics Inc., United StatesThe CP PITCH series is uniquely engineered for a broad variety of continuous polishing operations on glass, ceramics, infrared materials, crystals, metals and other exotic materials. Its refined natural formulation ensures batch-to-batch consistency and can polish materials that require a high degree of flatness control. Different grades of CP PITCH can be created for specialty applications.
- Type: Polishing Pitch
- CP55 Softening Point (°C): 52 - 55
- CP64 Softening Point (°C): 68 - 72
- CP73 Softening Point (°C): 77 - 80
- CP82 Softening Point (°C): 79 - 82
- CP91 Softening Point (°C): 84 - 87
- Size Availability: 1kg, Bulk Tray
UNICER 1000 Cerium PolishUniversal Photonics Inc., United StatesPremium-grade cerium oxide polish designed for a wide range of precision optics and ophthalmic applications where a high quality surface finish is required to meet the most critical and demanding specifications. UNICER 1000 performs across a wide range of speeds, pressures and pad materials. UNICER 1000 can be used for cleaning glass surface before coating or in coated or mirror glass production.
- Type: Polishing Material and Pads
- Appearance: Off White, Powder
- Cerium Oxide Content (%): ≥ 58
- Particle Size D50 (μm): 0.8 - 2.0
- Particle Size D99 (μm): ≤ 13
- Size Availability: 20 kg, 5kg, 1lb
SC-955 PADUniversal Photonics Inc., United StatesSC-955 PAD for High-Pressure Applications SC-955 is the material of choice for applications where higher removal rates and consistent flatness are required. Key to SC-955’s superior performance is its tightly controlled pore structure. Small and consistent throughout the polyurethane architecture, the pores “meter” external polishing or finish slurries while supporting uniform points of contact between the pad and working surface.
- Type: Polishing Material and Pads
- Density (g/cm3): 0.30 - 0.42
- Removal Rate (µm/min): 0.68
- Size Availability: Custom
- PSA Backing: Yes
HASTILITE Poly Silicon PolishUniversal Photonics Inc., United StatesHASTILITE POLY SILICON is an aqueous slurry of hexagonal SiC crystals specifically designed for polycrystalline silicon. Our unique combination of particles and chemistry gives superior removal rate and surface finish.
- Type: Polishing Material and Pads
- pH: 1 - 3
- SiC Content (%): 50+
- Suspension Properties: Partial
- Particle Size D50 (µm): 0.110 - 0.140
- Particle Size D99 (µm): < 0.389
- Size Availability: 1 Gallon, 1 Pint
HASTILITE Nano Silicon PolishUniversal Photonics Inc., United StatesHASTILITE NANO-SiC 100 is an aqueous slurry of hexagonal SiC crystals. This abrasive maximizes cut rates, while minimizing subsurface damage. The chemical inertness to most acids and bases, in combination with its heat and abrasion resistance, makes HASTILITE NANO-SiC suitable for extreme polishing conditions. HASTILITE NANO-SiC can be used on silicon, sapphire, SiC wafers and ceramic-based substrates.
- Type: Polishing Material and Pads
- pH: 8 - 10
- % Solids: 15 - 20
- SiC Content (%): 50+
- Particle Size D50 (μm): 0.110 - 0.140
- Particle Size D99 (μm): < 0.389
- Size Availability: 1pt, 1l, 1gl
HASTILITE Ceria-Base PolishUniversal Photonics Inc., United StatesHASTILITE PO and HASTILITE PO ULTRA meet stringent optics specifications with 90% APS < 1.0 µm. High ceria-base yields sleek-free finishes on softer glass, while producing extremely low scatter on harder glass and ceramic materials. PO and PO ULTRA’s versatility addresses high speed polishing needs in a wide variety of polishing systems, including super-polishing, pitch polishing or LP pad polishing.
- Type: Polishing Material and Pads
- pH: 6 - 7
- Particle Count D50 (μm): 0.4 - 0.7
- PO Density (g/mL): 1.50 - 1.68
- PO ULTRA Density (g/mL): 1.50 - 1.57
- PO Solid Content: 40 - 50
- PO ULTRA Solid Content: 40 - 44
UNIBOND 8.5 Thermoplastic AdhesiveUniversal Photonics Inc., United StatesThe UNIBOND Series of water soluble, thermoplastic adhesives is engineered for temporary bonding and blocking processes in a wide range of metals and ceramics, delivering superior adhesion strength and performance. UNIBOND 8.5 has the highest melting and bonding temperature in the Series, offering excellent backfill for bonding parts that are not flat.
- Type: Adhesives
- Color: Green
- Penetration Test (in): 0.003 - 0.005
- Softening Point (°C): 68 - 75
- Melting Point (°C): 77 - 85
- Size Availability: Bulk, 2 Bars, Each